[Thu Nov 24 05:21:06 2011] Detection parameters:
  Position = (353.8, 321.1) = 14 45 7.40 -62 27 59.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 534.3 +/- 37.9
  Background counts = 225.9
  Rate = 0.009 +/- 0.0007

[Thu Nov 24 05:21:09 2011] Off-axis axis estimate = 4.34'
[Thu Nov 24 16:42:30 2011] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:42:30 2011] Initial guess for spatial extent in simple fitting = 8.60"
[Thu Nov 24 16:42:30 2011] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.734
[Thu Nov 24 16:42:30 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 8.60"
[Fri Nov 25 01:00:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src29.ximg exists
[Fri Nov 25 01:00:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri Nov 25 01:00:37 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src29 appears to have run properly
[Fri Nov 25 01:00:41 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri Nov 25 01:00:41 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Nov 25 01:00:41 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Fri Nov 25 01:02:13 2011] Spatial fit model total counts = 3768.920000, observed total counts = 3771.000000
[Fri Nov 25 01:02:13 2011] Offset between fit and detection position for source 78 = 2.825097 pixels
[Fri Nov 25 01:02:13 2011] 3758.768000 total counts/ 2795.600000 bgd. counts: snr = 18.216483
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 2.825097 pixels
  Position = (355.4, 318.7) = 14 45 6.39 -62 28 7.1
  Extent = 17.2 (17.1-34.4)", rotation angle = 0
  Source counts = 963.2 +/- 61.3
  Background counts = 2795.6
  Rate = 0.01 +/- 0.0008
[Fri Nov 25 01:02:14 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:02:14 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 01:02:14 2011] Source does appear to be extended
[Fri Nov 25 01:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:02:14 2011] Source is confused with source 73
[Fri Nov 25 01:02:14 2011] Source is confused with source 87
[Fri Nov 25 01:02:14 2011] Source is confused with source 77
[Fri Nov 25 23:57:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:57:19 2011] Initial guess for spatial extent in simple fitting = 17.20"
[Fri Nov 25 23:57:19 2011] source mask rpix=4.0, npix_max = 79, mask sum = 71, frac = 0.895
[Fri Nov 25 23:57:19 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 17.20"
[Sat Nov 26 11:49:31 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src30.ximg exists
[Sat Nov 26 11:49:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src30.csv
[Sat Nov 26 11:49:31 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src30_1.ximg exists
[Sat Nov 26 11:49:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src30.csv
[Sat Nov 26 11:49:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 11:49:36 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sat Nov 26 11:49:36 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sat Nov 26 11:49:36 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Sat Nov 26 11:51:33 2011] Warning, spatial fit 30 centroid is now closest to src. 73
[Sat Nov 26 11:51:34 2011] Source 78 is offset by -8.456943 and -2.365425 pixels which is larger than
2 X fitted extent = 1.986589 x 1.986589, not incorporating fit results
[Sat Nov 26 11:51:34 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:34 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:34 2011] Source does appear to be extended
[Sat Nov 26 11:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:43:14 2011] XMMSAS src. selection expression = ellipse(30874.410000, 27682.044000, 1031.706030, 1031.706030, 0.000000, X, Y)
[Tue Nov 29 04:43:14 2011] Writing source region out to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src78_src.reg
[Tue Nov 29 04:43:14 2011] Extracting stamp from image fullrun_mos2_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (296, 259) - (415, 378)
[Tue Nov 29 04:43:15 2011] XMMSAS bgd. selection expression = annulus(30874.410000, 27682.044000, 1719.510049, 3439.020099, X, Y) && !ellipse(26668.119540, 25833.732200, 1078.000031, 1078.000031, 0.000000, X, Y) && !ellipse(26964.620000, 27064.718000, 723.760821, 723.760821, 0.000000, X, Y) && !ellipse(27792.418432, 28906.599316, 1417.256041, 858.493624, 102.582947, X, Y) && !ellipse(28334.689200, 31088.467000, 1417.256041, 772.991222, 133.511100, X, Y) && !ellipse(26043.432600, 23564.740000, 2284.624066, 1643.816047, 31.797900, X, Y) && !ellipse(26613.252000, 25264.346000, 976.216028, 976.216028, 0.000000, X, Y) && !ellipse(28763.042960, 25369.424400, 576.191217, 576.191217, 0.000000, X, Y) && !ellipse(30538.954000, 29882.886000, 418.662412, 418.662412, 0.000000, X, Y) && !ellipse(30203.072200, 31496.608200, 1493.824043, 1493.824043, 0.000000, X, Y) && !ellipse(29946.839508, 31707.535461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26613.860200, 30018.151800, 1093.768031, 1093.768031, 0.000000, X, Y) && !ellipse(26282.433600, 28675.260000, 1244.368036, 1244.368036, 0.000000, X, Y) && !ellipse(27928.621643, 25118.926270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27216.598541, 24902.628998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32715.126000, 42490.428000, 12589.488362, 12589.488362, 0.000000, X, Y) && !ellipse(30239.296295, 30411.389984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31232.000000, 29649.752000, 1464.752042, 1464.752042, 0.000000, X, Y) && !ellipse(30224.778000, 28356.614000, 2731.992079, 2731.992079, 0.000000, X, Y) && !ellipse(30216.060960, 30914.556000, 1439.496041, 1439.496041, 0.000000, X, Y) && !ellipse(29611.905800, 23851.468400, 1038.824030, 1038.824030, 0.000000, X, Y) && !ellipse(32291.219119, 28734.899135, 1984.928057, 1745.993159, 43.668361, X, Y) && !ellipse(26806.218628, 30868.432037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30104.582000, 28695.310000, 1394.776040, 1394.776040, 0.000000, X, Y) && !ellipse(30361.816000, 29429.788000, 2166.640062, 2166.640062, 0.000000, X, Y) && !ellipse(30981.388000, 27323.784000, 1392.904040, 1392.904040, 0.000000, X, Y) && !ellipse(27560.932000, 31419.048000, 1161.368033, 1161.368033, 0.000000, X, Y) && !ellipse(26984.665802, 24527.014038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29762.242000, 24268.984000, 1278.544037, 1278.544037, 0.000000, X, Y) && !ellipse(27083.286865, 24178.660919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34955.233673, 24393.497925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32764.855743, 23423.873260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30540.640000, 28088.712000, 2375.896068, 2375.896068, 0.000000, X, Y) && !ellipse(35040.308777, 26113.556000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31940.336395, 26747.194672, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 04:43:15 2011] Writing fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src78.gif
[Tue Nov 29 06:35:59 2011] Mean detx,y = (-3920.49, -571.13) 
[Tue Nov 29 06:36:02 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 06:37:06 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 06:37:07 2011] Setting source spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Tue Nov 29 06:37:07 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Wed Nov 30 00:29:29 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:29 2011] Error reading totcts from fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Wed Nov 30 00:29:37 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:37 2011] Using photon index=1.80, rate=0.0129, arf fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src78.arf
[Wed Nov 30 00:29:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:37 2011] Updating source flux to 1.4e-13
[Wed Nov 30 00:40:04 2011] Flag b found in src. 78 procflags, skipping spectral fitting
[Wed Nov 30 00:40:04 2011] Flag c found in src. 78 procflags, skipping spectral fitting