[Thu Nov 24 05:21:06 2011] Detection parameters:
  Position = (305.0, 319.1) = 14 45 38.02 -62 28 1.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 528.1 +/- 37.0
  Background counts = 159.5
  Rate = 0.008 +/- 0.0006

[Thu Nov 24 05:21:09 2011] Off-axis axis estimate = 1.57'
[Thu Nov 24 16:42:30 2011] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:42:30 2011] Initial guess for spatial extent in simple fitting = 7.21"
[Thu Nov 24 16:42:30 2011] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.644
[Thu Nov 24 16:42:30 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 7.21"
[Fri Nov 25 01:00:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src33.ximg exists
[Fri Nov 25 01:00:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src33.csv
[Fri Nov 25 01:00:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri Nov 25 01:00:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src33.csv
[Fri Nov 25 01:00:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 01:00:41 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri Nov 25 01:00:41 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Nov 25 01:00:41 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Fri Nov 25 01:02:13 2011] Source 76 is offset by -2.604029 and -2.271348 pixels which is larger than
2 X fitted extent = 1.125370 x 1.125370, not incorporating fit results
[Fri Nov 25 01:02:13 2011] Warning, spatial fit 33 centroid is now closest to src. 74
[Fri Nov 25 01:02:14 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:02:14 2011] Assessing source extent using major
[Fri Nov 25 01:02:14 2011] Source does appear to be extended
[Fri Nov 25 01:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:02:14 2011] Source is confused with source 2
[Fri Nov 25 23:57:19 2011] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:57:19 2011] Initial guess for spatial extent in simple fitting = 7.21"
[Fri Nov 25 23:57:19 2011] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.644
[Fri Nov 25 23:57:19 2011] Giving source the simple spatial ID 34 for pass 1, mean size = 7.21"
[Sat Nov 26 11:49:31 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src34.ximg exists
[Sat Nov 26 11:49:31 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src34_1.ximg exists
[Sat Nov 26 11:49:31 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src34 appears to have run properly
[Sat Nov 26 11:49:36 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Sat Nov 26 11:49:36 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Sat Nov 26 11:49:36 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Sat Nov 26 11:51:34 2011] Warning, spatial fit 34 centroid is now closest to src. 79
[Sat Nov 26 11:51:34 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:34 2011] Assessing source extent using major
[Sat Nov 26 11:51:34 2011] Source does appear to be extended
[Sat Nov 26 11:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:43:15 2011] XMMSAS src. selection expression = ellipse(26487.381470, 27709.666687, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 04:43:15 2011] Writing source region out to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src76_src.reg
[Tue Nov 29 04:43:15 2011] Extracting stamp from image fullrun_mos2_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (268, 282) - (343, 357)
[Tue Nov 29 04:43:15 2011] XMMSAS bgd. selection expression = annulus(26487.381470, 27709.666687, 1087.500000, 2175.000000, X, Y) && !ellipse(26668.119540, 25833.732200, 1078.000031, 1078.000031, 0.000000, X, Y) && !ellipse(26964.620000, 27064.718000, 723.760821, 723.760821, 0.000000, X, Y) && !ellipse(27792.418432, 28906.599316, 1417.256041, 858.493624, 102.582947, X, Y) && !ellipse(28334.689200, 31088.467000, 1417.256041, 772.991222, 133.511100, X, Y) && !ellipse(26043.432600, 23564.740000, 2284.624066, 1643.816047, 31.797900, X, Y) && !ellipse(26613.252000, 25264.346000, 976.216028, 976.216028, 0.000000, X, Y) && !ellipse(28763.042960, 25369.424400, 576.191217, 576.191217, 0.000000, X, Y) && !ellipse(26083.042000, 28273.630000, 645.227219, 645.227219, 0.000000, X, Y) && !ellipse(26438.932495, 27347.868500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26613.860200, 30018.151800, 1093.768031, 1093.768031, 0.000000, X, Y) && !ellipse(25779.289920, 27856.571800, 397.180811, 397.180811, 0.000000, X, Y) && !ellipse(26282.433600, 28675.260000, 1244.368036, 1244.368036, 0.000000, X, Y) && !ellipse(27928.621643, 25118.926270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27216.598541, 24902.628998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25017.459800, 25138.974000, 500.624814, 500.624814, 0.000000, X, Y) && !ellipse(30224.778000, 28356.614000, 2731.992079, 2731.992079, 0.000000, X, Y) && !ellipse(30361.816000, 29429.788000, 2166.640062, 2166.640062, 0.000000, X, Y) && !ellipse(25509.908539, 27004.918365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29762.242000, 24268.984000, 1278.544037, 1278.544037, 0.000000, X, Y) && !ellipse(30540.640000, 28088.712000, 2375.896068, 2375.896068, 0.000000, X, Y)
[Tue Nov 29 04:43:15 2011] Writing fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src76.gif
[Tue Nov 29 06:44:35 2011] Mean detx,y = (297.13, 27.25) 
[Tue Nov 29 06:44:37 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 06:44:50 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 06:44:51 2011] Setting source spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Tue Nov 29 06:44:51 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src76_bgd.pi.gz
[Tue Nov 29 20:49:06 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 20:49:06 2011] rmf not generated due to insufficient counts
[Wed Nov 30 00:29:29 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:29 2011] Error reading totcts from fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Wed Nov 30 00:29:37 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:37 2011] Using photon index=1.80, rate=0.00847, arf fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src76.arf
[Wed Nov 30 00:29:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:37 2011] Updating source flux to 9.1e-14
[Wed Nov 30 00:40:04 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting