[Thu Nov 24 05:21:06 2011] Detection parameters:
  Position = (349.6, 360.2) = 14 45 10.08 -62 25 7.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 584.2 +/- 34.3
  Background counts = 197.8
  Rate = 0.01 +/- 0.0006

[Thu Nov 24 05:21:09 2011] Off-axis axis estimate = 5.82'
[Thu Nov 24 16:42:30 2011] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:42:30 2011] Initial guess for spatial extent in simple fitting = 9.34"
[Thu Nov 24 16:42:30 2011] source mask rpix=2.1, npix_max = 28, mask sum = 18, frac = 0.643
[Thu Nov 24 16:42:30 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 9.34"
[Fri Nov 25 01:00:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src20.ximg exists
[Fri Nov 25 01:00:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Nov 25 01:00:37 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src20 appears to have run properly
[Fri Nov 25 01:00:40 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Nov 25 01:00:40 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Nov 25 01:00:40 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Fri Nov 25 01:02:13 2011] Spatial fit model total counts = 4587.560000, observed total counts = 4577.000000
[Fri Nov 25 01:02:13 2011] Offset between fit and detection position for source 64 = 3.069754 pixels
[Fri Nov 25 01:02:13 2011] 4305.040000 total counts/ 3291.480000 bgd. counts: snr = 17.666636
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 3.069754 pixels
  Position = (347.7, 362.6) = 14 45 11.29 -62 24 56.4
  Extent = 18.7 (16.4-37.3)", rotation angle = 0
  Source counts = 1013.6 +/- 65.6
  Background counts = 3291.5
  Rate = 0.01 +/- 0.0009
[Fri Nov 25 01:02:14 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:02:14 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 01:02:14 2011] Source does appear to be extended
[Fri Nov 25 01:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:02:14 2011] Source is confused with source 18
[Fri Nov 25 23:57:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:57:19 2011] Initial guess for spatial extent in simple fitting = 18.67"
[Fri Nov 25 23:57:19 2011] source mask rpix=4.3, npix_max = 91, mask sum = 71, frac = 0.773
[Fri Nov 25 23:57:19 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 18.67"
[Sat Nov 26 11:49:31 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src21.ximg exists
[Sat Nov 26 11:49:31 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src21_1.ximg exists
[Sat Nov 26 11:49:31 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src21 appears to have run properly
[Sat Nov 26 11:49:35 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sat Nov 26 11:49:35 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sat Nov 26 11:49:35 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sat Nov 26 11:51:33 2011] Warning, spatial fit 21 centroid is now closest to src. 55
[Sat Nov 26 11:51:34 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:34 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:34 2011] Source does appear to be extended
[Sat Nov 26 11:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:43:13 2011] Counts = 1013.560000, rescaling region sizes by 2.000000
[Tue Nov 29 04:43:13 2011] XMMSAS src. selection expression = ellipse(30203.072200, 31496.608200, 2240.736064, 2240.736064, 0.000000, X, Y)
[Tue Nov 29 04:43:13 2011] Writing source region out to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src64_src.reg
[Tue Nov 29 04:43:13 2011] Extracting stamp from image fullrun_mos2_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (219, 234) - (476, 491)
[Tue Nov 29 04:43:13 2011] XMMSAS bgd. selection expression = annulus(30203.072200, 31496.608200, 7469.120215, 14938.240430, X, Y) && !ellipse(26668.119540, 25833.732200, 1078.000031, 1078.000031, 0.000000, X, Y) && !ellipse(26964.620000, 27064.718000, 723.760821, 723.760821, 0.000000, X, Y) && !ellipse(27792.418432, 28906.599316, 1417.256041, 858.493624, 102.582947, X, Y) && !ellipse(28334.689200, 31088.467000, 1417.256041, 772.991222, 133.511100, X, Y) && !ellipse(26043.432600, 23564.740000, 2284.624066, 1643.816047, 31.797900, X, Y) && !ellipse(26613.252000, 25264.346000, 976.216028, 976.216028, 0.000000, X, Y) && !ellipse(26424.450000, 24509.666000, 585.609617, 585.609617, 0.000000, X, Y) && !ellipse(25838.926400, 22815.724000, 1551.240045, 1551.240045, 0.000000, X, Y) && !ellipse(30246.992360, 32184.410200, 673.794419, 673.794419, 0.000000, X, Y) && !ellipse(28918.935600, 33527.008800, 918.664026, 918.664026, 0.000000, X, Y) && !ellipse(28763.042960, 25369.424400, 576.191217, 576.191217, 0.000000, X, Y) && !ellipse(25878.018384, 23165.672000, 1266.568036, 1266.568036, 0.000000, X, Y) && !ellipse(29025.231049, 33102.782562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30538.954000, 29882.886000, 418.662412, 418.662412, 0.000000, X, Y) && !ellipse(28214.960400, 20640.399000, 677.336019, 677.336019, 0.000000, X, Y) && !ellipse(27642.098000, 21478.286000, 999.408029, 999.408029, 0.000000, X, Y) && !ellipse(28338.770000, 19799.480000, 1515.544044, 1515.544044, 0.000000, X, Y) && !ellipse(29728.505829, 37614.606598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31594.946000, 41184.194000, 2783.448080, 2783.448080, 0.000000, X, Y) && !ellipse(29946.839508, 31707.535461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26083.042000, 28273.630000, 645.227219, 645.227219, 0.000000, X, Y) && !ellipse(26438.932495, 27347.868500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29416.046200, 35189.239800, 1209.272035, 1209.272035, 0.000000, X, Y) && !ellipse(29202.140000, 35522.222000, 1024.632029, 1024.632029, 0.000000, X, Y) && !ellipse(31842.316000, 41559.746000, 2960.288085, 2960.288085, 0.000000, X, Y) && !ellipse(29569.642151, 36332.997406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27187.184000, 17997.246000, 674.838419, 674.838419, 0.000000, X, Y) && !ellipse(30874.410000, 27682.044000, 1375.608040, 1375.608040, 0.000000, X, Y) && !ellipse(27450.823600, 20489.535320, 1117.864032, 1117.864032, 0.000000, X, Y) && !ellipse(26613.860200, 30018.151800, 1093.768031, 1093.768031, 0.000000, X, Y) && !ellipse(26487.381470, 27709.666687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29802.671417, 33592.237213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25779.289920, 27856.571800, 397.180811, 397.180811, 0.000000, X, Y) && !ellipse(28403.417600, 19722.993200, 654.893619, 654.893619, 0.000000, X, Y) && !ellipse(26282.433600, 28675.260000, 1244.368036, 1244.368036, 0.000000, X, Y) && !ellipse(27928.621643, 25118.926270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27216.598541, 24902.628998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29423.002000, 39178.822000, 1986.152057, 1986.152057, 0.000000, X, Y) && !ellipse(28074.764800, 20182.610000, 2512.384072, 2512.384072, 0.000000, X, Y) && !ellipse(31244.881000, 39767.122400, 829.992024, 829.992024, 0.000000, X, Y) && !ellipse(29178.244060, 22887.227600, 796.143223, 796.143223, 0.000000, X, Y) && !ellipse(32715.126000, 42490.428000, 12589.488362, 12589.488362, 0.000000, X, Y) && !ellipse(30289.370000, 39549.632000, 4262.304123, 4262.304123, 0.000000, X, Y) && !ellipse(30239.296295, 30411.389984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30752.459400, 40835.362000, 1053.704030, 1053.704030, 0.000000, X, Y) && !ellipse(25017.459800, 25138.974000, 500.624814, 500.624814, 0.000000, X, Y) && !ellipse(27663.564000, 22092.876000, 1309.008038, 314.276009, 85.672660, X, Y) && !ellipse(28940.214355, 19266.641663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31098.074000, 40712.596000, 1480.144043, 1480.144043, 340.352000, X, Y) && !ellipse(29996.580000, 38092.536000, 1848.888053, 1848.888053, 0.000000, X, Y) && !ellipse(31232.000000, 29649.752000, 1464.752042, 1464.752042, 0.000000, X, Y) && !ellipse(27419.492000, 18632.994000, 1499.480043, 1499.480043, 0.000000, X, Y) && !ellipse(27658.144000, 21856.566000, 1227.280035, 1227.280035, 0.000000, X, Y) && !ellipse(30224.778000, 28356.614000, 2731.992079, 2731.992079, 0.000000, X, Y) && !ellipse(28120.497955, 21591.195480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30216.060960, 30914.556000, 1439.496041, 1439.496041, 0.000000, X, Y) && !ellipse(22901.283844, 22864.092194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29611.905800, 23851.468400, 1038.824030, 1038.824030, 0.000000, X, Y) && !ellipse(22866.757843, 27010.456757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32291.219119, 28734.899135, 1984.928057, 1745.993159, 43.668361, X, Y) && !ellipse(30298.106000, 40222.136000, 1986.760057, 1986.760057, 0.000000, X, Y) && !ellipse(26806.218628, 30868.432037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30104.582000, 28695.310000, 1394.776040, 1394.776040, 0.000000, X, Y) && !ellipse(31299.572000, 39755.366000, 1490.792043, 1490.792043, 0.000000, X, Y) && !ellipse(30361.816000, 29429.788000, 2166.640062, 2166.640062, 0.000000, X, Y) && !ellipse(25509.908539, 27004.918365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25561.360352, 18831.709366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30981.388000, 27323.784000, 1392.904040, 1392.904040, 0.000000, X, Y) && !ellipse(24993.300903, 24572.566376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27249.358948, 22242.265747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27560.932000, 31419.048000, 1161.368033, 1161.368033, 0.000000, X, Y) && !ellipse(26984.665802, 24527.014038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29762.242000, 24268.984000, 1278.544037, 1278.544037, 0.000000, X, Y) && !ellipse(28030.290680, 18330.564621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19471.174500, 20805.539124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32810.599243, 43267.697632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16034.401031, 23328.316101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28970.436554, 15788.241318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26380.834000, 20194.031000, 1404.248040, 1404.248040, 0.000000, X, Y) && !ellipse(27772.829834, 22894.582550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22740.742188, 26603.358459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27914.556000, 34859.644000, 1664.240048, 1664.240048, 0.000000, X, Y) && !ellipse(35392.360352, 23533.913605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37888.454285, 33633.103424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27083.286865, 24178.660919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27237.549377, 23364.838684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29235.334000, 22481.044000, 1345.368039, 1345.368039, 0.000000, X, Y) && !ellipse(27731.451202, 33618.617584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26527.055573, 38296.909302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35731.699646, 21630.414246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25116.048218, 35952.324615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41501.234955, 35704.180267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25814.743073, 18152.357727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25605.447400, 19969.652000, 1333.416038, 1333.416038, 0.000000, X, Y) && !ellipse(34080.980316, 17351.188034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28340.156494, 22478.072174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27837.567413, 17446.101349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17009.165600, 26789.544400, 769.122422, 769.122422, 0.000000, X, Y) && !ellipse(18189.214844, 32046.062317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28708.398438, 17708.491257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27713.365143, 33183.561829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35386.213959, 24025.282532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34141.021149, 19451.908279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26582.373108, 19546.614502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35265.030457, 21355.594818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35275.682434, 18691.991104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18101.513916, 28329.631958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39021.634064, 25609.780121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33124.537872, 21344.841949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26727.321777, 19965.217041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34955.233673, 24393.497925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35530.119202, 23106.918518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26514.457458, 18562.085831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34407.368378, 20999.923111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28606.453278, 36048.436676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29383.139618, 18391.217438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32764.855743, 23423.873260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31289.325867, 38423.365692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30540.640000, 28088.712000, 2375.896068, 2375.896068, 0.000000, X, Y) && !ellipse(41303.899902, 35118.717102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35040.308777, 26113.556000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24939.552490, 33016.422424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28618.000000, 16478.459991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34018.103912, 37034.057892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40926.989288, 35878.708618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36554.315338, 15742.896072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42038.397827, 25792.653229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31940.336395, 26747.194672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36404.590271, 17868.851044, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 04:43:13 2011] Writing fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src64.gif
[Tue Nov 29 06:07:24 2011] Mean detx,y = (-3383.90, 3365.47) 
[Tue Nov 29 06:07:29 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 06:14:45 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 06:14:45 2011] Setting source spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Tue Nov 29 06:14:45 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Wed Nov 30 00:29:28 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:28 2011] Error reading totcts from fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Wed Nov 30 00:29:36 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:36 2011] Using photon index=1.80, rate=0.0136, arf fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src64.arf
[Wed Nov 30 00:29:36 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:36 2011] Updating source flux to 1.4e-13
[Wed Nov 30 00:40:04 2011] Flag c found in src. 64 procflags, skipping spectral fitting