[Thu Nov 24 05:21:06 2011] Detection parameters:
  Position = (314.4, 366.9) = 14 45 32.17 -62 24 37.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 239.8 +/- 26.8
  Background counts = 166.5
  Rate = 0.004 +/- 0.0004

[Thu Nov 24 05:21:09 2011] Off-axis axis estimate = 5.10'
[Thu Nov 24 16:42:30 2011] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:42:30 2011] Initial guess for spatial extent in simple fitting = 8.98"
[Thu Nov 24 16:42:30 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.141
[Thu Nov 24 16:42:30 2011] Giving source the simple spatial ID 71 for pass 0, mean size = 8.98"
[Fri Nov 25 01:00:38 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src71.ximg exists
[Fri Nov 25 01:00:38 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src71_1.ximg exists
[Fri Nov 25 01:00:38 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src71 appears to have run properly
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Fri Nov 25 01:00:42 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Fri Nov 25 01:02:13 2011] Spatial fit model total counts = 2926.450000, observed total counts = 2924.000000
[Fri Nov 25 01:02:13 2011] Offset between fit and detection position for source 58 = 6.033631 pixels
[Fri Nov 25 01:02:13 2011] 3006.103000 total counts/ 2711.040000 bgd. counts: snr = 5.666916
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 6.033631 pixels
  Position = (317.3, 361.7) = 14 45 30.30 -62 25 0.5
  Extent = 14.5 (10.8-18.0)", rotation angle = 0
  Source counts = 295.1 +/- 54.8
  Background counts = 2711.0
  Rate = 0.004 +/- 0.0007
[Fri Nov 25 01:02:14 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:02:14 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 01:02:14 2011] Source does appear to be extended
[Fri Nov 25 01:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:02:14 2011] Source is confused with source 4
[Fri Nov 25 23:57:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:57:19 2011] Initial guess for spatial extent in simple fitting = 14.52"
[Fri Nov 25 23:57:19 2011] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.951
[Fri Nov 25 23:57:19 2011] Giving source the simple spatial ID 72 for pass 1, mean size = 14.52"
[Sat Nov 26 11:49:33 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src72.ximg exists
[Sat Nov 26 11:49:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src72.csv
[Sat Nov 26 11:49:33 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src72_1.ximg exists
[Sat Nov 26 11:49:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src72.csv
[Sat Nov 26 11:49:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Sat Nov 26 11:49:37 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src72 appears to have run properly
[Sat Nov 26 11:51:33 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 58 at 10.387221 pixels away
[Sat Nov 26 11:51:34 2011] Warning: source 72 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 58 at 13.400404 pixels away
[Sat Nov 26 11:51:34 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:34 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:34 2011] Source does appear to be extended
[Sat Nov 26 11:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:43:23 2011] XMMSAS src. selection expression = ellipse(27560.932000, 31419.048000, 871.026025, 871.026025, 0.000000, X, Y)
[Tue Nov 29 04:43:23 2011] Writing source region out to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src58_src.reg
[Tue Nov 29 04:43:23 2011] Extracting stamp from image fullrun_mos2_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (267, 312) - (367, 412)
[Tue Nov 29 04:43:23 2011] XMMSAS bgd. selection expression = annulus(27560.932000, 31419.048000, 1451.710042, 2903.420084, X, Y) && !ellipse(27792.418432, 28906.599316, 1417.256041, 858.493624, 102.582947, X, Y) && !ellipse(28334.689200, 31088.467000, 1417.256041, 772.991222, 133.511100, X, Y) && !ellipse(30246.992360, 32184.410200, 673.794419, 673.794419, 0.000000, X, Y) && !ellipse(28918.935600, 33527.008800, 918.664026, 918.664026, 0.000000, X, Y) && !ellipse(29025.231049, 33102.782562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30538.954000, 29882.886000, 418.662412, 418.662412, 0.000000, X, Y) && !ellipse(30203.072200, 31496.608200, 1493.824043, 1493.824043, 0.000000, X, Y) && !ellipse(29946.839508, 31707.535461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26083.042000, 28273.630000, 645.227219, 645.227219, 0.000000, X, Y) && !ellipse(29416.046200, 35189.239800, 1209.272035, 1209.272035, 0.000000, X, Y) && !ellipse(30874.410000, 27682.044000, 1375.608040, 1375.608040, 0.000000, X, Y) && !ellipse(26613.860200, 30018.151800, 1093.768031, 1093.768031, 0.000000, X, Y) && !ellipse(26487.381470, 27709.666687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29802.671417, 33592.237213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26282.433600, 28675.260000, 1244.368036, 1244.368036, 0.000000, X, Y) && !ellipse(32715.126000, 42490.428000, 12589.488362, 12589.488362, 0.000000, X, Y) && !ellipse(30239.296295, 30411.389984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31232.000000, 29649.752000, 1464.752042, 1464.752042, 0.000000, X, Y) && !ellipse(30224.778000, 28356.614000, 2731.992079, 2731.992079, 0.000000, X, Y) && !ellipse(30216.060960, 30914.556000, 1439.496041, 1439.496041, 0.000000, X, Y) && !ellipse(32291.219119, 28734.899135, 1984.928057, 1745.993159, 43.668361, X, Y) && !ellipse(26806.218628, 30868.432037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30104.582000, 28695.310000, 1394.776040, 1394.776040, 0.000000, X, Y) && !ellipse(30361.816000, 29429.788000, 2166.640062, 2166.640062, 0.000000, X, Y) && !ellipse(30981.388000, 27323.784000, 1392.904040, 1392.904040, 0.000000, X, Y) && !ellipse(27914.556000, 34859.644000, 1664.240048, 1664.240048, 0.000000, X, Y) && !ellipse(27731.451202, 33618.617584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27713.365143, 33183.561829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30540.640000, 28088.712000, 2375.896068, 2375.896068, 0.000000, X, Y) && !ellipse(24939.552490, 33016.422424, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 04:43:23 2011] Writing fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src58.gif
[Tue Nov 29 08:43:34 2011] Mean detx,y = (-1395.47, 3435.48) 
[Tue Nov 29 08:43:37 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 08:44:14 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 08:44:14 2011] Setting source spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Tue Nov 29 08:44:14 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Wed Nov 30 00:29:32 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:32 2011] Error reading totcts from fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Wed Nov 30 00:29:39 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:39 2011] Using photon index=1.80, rate=0.00395, arf fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src58.arf
[Wed Nov 30 00:29:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:39 2011] Updating source flux to 4.7e-14
[Wed Nov 30 00:40:04 2011] Flag c found in src. 58 procflags, skipping spectral fitting