[Thu Nov 24 05:21:06 2011] Detection parameters:
  Position = (343.1, 386.7) = 14 45 14.19 -62 23 6.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 359.4 +/- 38.0
  Background counts = 171.7
  Rate = 0.008 +/- 0.0009

[Thu Nov 24 05:21:09 2011] Off-axis axis estimate = 7.17'
[Thu Nov 24 16:42:30 2011] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:42:30 2011] Initial guess for spatial extent in simple fitting = 10.01"
[Thu Nov 24 16:42:30 2011] source mask rpix=2.3, npix_max = 31, mask sum = 28, frac = 0.892
[Thu Nov 24 16:42:30 2011] Giving source the simple spatial ID 34 for pass 0, mean size = 10.01"
[Fri Nov 25 01:00:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src34.ximg exists
[Fri Nov 25 01:00:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src34.csv
[Fri Nov 25 01:00:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src34_1.ximg exists
[Fri Nov 25 01:00:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src34.csv
[Fri Nov 25 01:00:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 01:00:41 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Fri Nov 25 01:00:41 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Fri Nov 25 01:00:41 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Fri Nov 25 01:02:12 2011] Source 51 is offset by 1.400936 and -3.040837 pixels which is larger than
2 X fitted extent = 4.806758 x 0.964497, not incorporating fit results
[Fri Nov 25 01:02:13 2011] Source 51 is offset by -3.602329 and 5.993140 pixels which is larger than
2 X fitted extent = 2.128520 x 2.128520, not incorporating fit results
[Fri Nov 25 01:02:14 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:02:14 2011] Assessing source extent using major
[Fri Nov 25 01:02:14 2011] Source does appear to be extended
[Fri Nov 25 01:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 23:57:19 2011] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:57:19 2011] Initial guess for spatial extent in simple fitting = 10.01"
[Fri Nov 25 23:57:19 2011] source mask rpix=2.3, npix_max = 31, mask sum = 28, frac = 0.892
[Fri Nov 25 23:57:19 2011] Giving source the simple spatial ID 35 for pass 1, mean size = 10.01"
[Sat Nov 26 11:49:31 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src35.ximg exists
[Sat Nov 26 11:49:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src35.csv
[Sat Nov 26 11:49:31 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src35_1.ximg exists
[Sat Nov 26 11:49:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src35.csv
[Sat Nov 26 11:49:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 11:49:36 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sat Nov 26 11:49:36 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sat Nov 26 11:49:36 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Sat Nov 26 11:51:34 2011] Warning, spatial fit 35 centroid is now closest to src. 17
[Sat Nov 26 11:51:34 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:34 2011] Assessing source extent using major
[Sat Nov 26 11:51:34 2011] Source does appear to be extended
[Sat Nov 26 11:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:43:15 2011] XMMSAS src. selection expression = ellipse(29802.671417, 33592.237213, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 04:43:15 2011] Writing source region out to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src51_src.reg
[Tue Nov 29 04:43:15 2011] Extracting stamp from image fullrun_mos2_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (306, 349) - (381, 424)
[Tue Nov 29 04:43:15 2011] XMMSAS bgd. selection expression = annulus(29802.671417, 33592.237213, 1087.500000, 2175.000000, X, Y) && !ellipse(28334.689200, 31088.467000, 1417.256041, 772.991222, 133.511100, X, Y) && !ellipse(30246.992360, 32184.410200, 673.794419, 673.794419, 0.000000, X, Y) && !ellipse(28918.935600, 33527.008800, 918.664026, 918.664026, 0.000000, X, Y) && !ellipse(29025.231049, 33102.782562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30203.072200, 31496.608200, 1493.824043, 1493.824043, 0.000000, X, Y) && !ellipse(29946.839508, 31707.535461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29416.046200, 35189.239800, 1209.272035, 1209.272035, 0.000000, X, Y) && !ellipse(29202.140000, 35522.222000, 1024.632029, 1024.632029, 0.000000, X, Y) && !ellipse(29569.642151, 36332.997406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32715.126000, 42490.428000, 12589.488362, 12589.488362, 0.000000, X, Y) && !ellipse(30289.370000, 39549.632000, 4262.304123, 4262.304123, 0.000000, X, Y) && !ellipse(30216.060960, 30914.556000, 1439.496041, 1439.496041, 0.000000, X, Y) && !ellipse(26806.218628, 30868.432037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30361.816000, 29429.788000, 2166.640062, 2166.640062, 0.000000, X, Y) && !ellipse(27560.932000, 31419.048000, 1161.368033, 1161.368033, 0.000000, X, Y) && !ellipse(27914.556000, 34859.644000, 1664.240048, 1664.240048, 0.000000, X, Y) && !ellipse(27731.451202, 33618.617584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27713.365143, 33183.561829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28606.453278, 36048.436676, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 04:43:15 2011] Writing fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src51.gif
[Tue Nov 29 06:45:04 2011] Mean detx,y = (-3650.87, 5414.46) 
[Tue Nov 29 06:45:06 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 06:45:49 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 06:45:49 2011] Setting source spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Tue Nov 29 06:45:49 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Tue Nov 29 20:49:12 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 20:49:12 2011] rmf not generated due to insufficient counts
[Wed Nov 30 00:29:29 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:29 2011] Error reading totcts from fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Wed Nov 30 00:29:37 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:37 2011] Using photon index=1.80, rate=0.00827, arf fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src51.arf
[Wed Nov 30 00:29:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:37 2011] Updating source flux to 1.2e-13
[Wed Nov 30 00:40:04 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting