[Thu Nov 24 05:21:06 2011] Detection parameters:
  Position = (338.5, 410.0) = 14 45 17.13 -62 21 29.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 441.0 +/- 32.0
  Background counts = 146.4
  Rate = 0.01 +/- 0.0007

[Thu Nov 24 05:21:09 2011] Off-axis axis estimate = 8.59'
[Thu Nov 24 16:42:30 2011] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:42:30 2011] Initial guess for spatial extent in simple fitting = 10.73"
[Thu Nov 24 16:42:30 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.023
[Thu Nov 24 16:42:30 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 10.73"
[Fri Nov 25 01:00:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src25.ximg exists
[Fri Nov 25 01:00:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src25.csv
[Fri Nov 25 01:00:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri Nov 25 01:00:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src25.csv
[Fri Nov 25 01:00:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 01:00:40 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri Nov 25 01:00:40 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Nov 25 01:00:40 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Nov 25 01:02:13 2011] Warning, spatial fit 25 centroid is now closest to src. 39
[Fri Nov 25 01:02:14 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:02:14 2011] Assessing source extent using major
[Fri Nov 25 01:02:14 2011] Source does appear to be extended
[Fri Nov 25 01:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:02:14 2011] Source is confused with source 48
[Fri Nov 25 23:57:19 2011] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:57:19 2011] Initial guess for spatial extent in simple fitting = 10.73"
[Fri Nov 25 23:57:19 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.023
[Fri Nov 25 23:57:19 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 10.73"
[Sat Nov 26 11:49:31 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src26.ximg exists
[Sat Nov 26 11:49:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src26.csv
[Sat Nov 26 11:49:31 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src26_1.ximg exists
[Sat Nov 26 11:49:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src26.csv
[Sat Nov 26 11:49:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 11:49:36 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sat Nov 26 11:49:36 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sat Nov 26 11:49:36 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Sat Nov 26 11:51:33 2011] Spatial fit model total counts = 9403.950000, observed total counts = 9402.000000
[Sat Nov 26 11:51:33 2011] Offset between fit and detection position for source 43 = 2.417966 pixels
[Sat Nov 26 11:51:33 2011] Warning, changing simple spatial fit ID from 26 to 19
[Sat Nov 26 11:51:33 2011] 9008.410000 total counts/ 3655.210000 bgd. counts: snr = 88.543626
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 2.417966 pixels
  Position = (336.1, 409.6) = 14 45 18.63 -62 21 31.9
  Extent = 44.0 (43.9-44.0)", rotation angle = 0
  Source counts = 5353.2 +/- 94.9
  Background counts = 3655.2
  Rate = 0.07 +/- 0.001
[Sat Nov 26 11:51:33 2011] Spatial fit model total counts = 3299.310000, observed total counts = 3301.000000
[Sat Nov 26 11:51:33 2011] Offset between fit and detection position for source 43 = 0.778425 pixels
[Sat Nov 26 11:51:33 2011] Warning, changing simple spatial fit ID from 19 to 28
[Sat Nov 26 11:51:33 2011] 2212.095000 total counts/ 1991.730000 bgd. counts: snr = 4.937731
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.778425 pixels
  Position = (336.2, 408.9) = 14 45 18.53 -62 21 35.2
  Extent = 12.8 (9.5-16.5)", rotation angle = 0
  Source counts = 220.4 +/- 47.0
  Background counts = 1991.7
  Rate = 0.003 +/- 0.0006
[Sat Nov 26 11:51:34 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:34 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:34 2011] Source does appear to be extended
[Sat Nov 26 11:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:43:14 2011] XMMSAS src. selection expression = ellipse(29202.140000, 35522.222000, 768.474022, 768.474022, 0.000000, X, Y)
[Tue Nov 29 04:43:14 2011] Writing source region out to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src43_src.reg
[Tue Nov 29 04:43:14 2011] Extracting stamp from image fullrun_mos2_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (292, 365) - (380, 453)
[Tue Nov 29 04:43:14 2011] XMMSAS bgd. selection expression = annulus(29202.140000, 35522.222000, 1280.790037, 2561.580074, X, Y) && !ellipse(28918.935600, 33527.008800, 918.664026, 918.664026, 0.000000, X, Y) && !ellipse(29025.231049, 33102.782562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29728.505829, 37614.606598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30203.072200, 31496.608200, 1493.824043, 1493.824043, 0.000000, X, Y) && !ellipse(29416.046200, 35189.239800, 1209.272035, 1209.272035, 0.000000, X, Y) && !ellipse(29569.642151, 36332.997406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29802.671417, 33592.237213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29423.002000, 39178.822000, 1986.152057, 1986.152057, 0.000000, X, Y) && !ellipse(32715.126000, 42490.428000, 12589.488362, 12589.488362, 0.000000, X, Y) && !ellipse(30289.370000, 39549.632000, 4262.304123, 4262.304123, 0.000000, X, Y) && !ellipse(29996.580000, 38092.536000, 1848.888053, 1848.888053, 0.000000, X, Y) && !ellipse(27914.556000, 34859.644000, 1664.240048, 1664.240048, 0.000000, X, Y) && !ellipse(27731.451202, 33618.617584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26527.055573, 38296.909302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27713.365143, 33183.561829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28606.453278, 36048.436676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31289.325867, 38423.365692, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 04:43:14 2011] Writing fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src43.gif
[Tue Nov 29 06:19:38 2011] Mean detx,y = (-3472.05, 7379.89) 
[Tue Nov 29 06:19:40 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 06:20:24 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 06:20:25 2011] Setting source spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Tue Nov 29 06:20:25 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Wed Nov 30 00:29:29 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:29 2011] Error reading totcts from fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed Nov 30 00:29:37 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:37 2011] Using photon index=1.80, rate=0.00295, arf fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src43.arf
[Wed Nov 30 00:29:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:37 2011] Updating source flux to 4.7e-14
[Wed Nov 30 00:40:04 2011] Flag c found in src. 43 procflags, skipping spectral fitting