[Thu Nov 24 05:21:05 2011] Detection parameters:
  Position = (348.4, 371.0) = 14 45 10.84 -62 24 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1117.1 +/- 44.3
  Background counts = 187.8
  Rate = 0.02 +/- 0.0008

[Thu Nov 24 05:21:09 2011] Off-axis axis estimate = 6.39'
[Thu Nov 24 16:42:30 2011] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:42:30 2011] Initial guess for spatial extent in simple fitting = 9.62"
[Thu Nov 24 16:42:30 2011] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.816
[Thu Nov 24 16:42:30 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 9.62"
[Fri Nov 25 01:00:36 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src9.ximg exists
[Fri Nov 25 01:00:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src9.csv
[Fri Nov 25 01:00:36 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Nov 25 01:00:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src9.csv
[Fri Nov 25 01:00:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 01:00:40 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Nov 25 01:00:40 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Nov 25 01:00:40 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Nov 25 01:02:12 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 12.985695 pixels away
[Fri Nov 25 01:02:13 2011] Spatial fit model total counts = 5575.580000, observed total counts = 5565.000000
[Fri Nov 25 01:02:13 2011] Offset between fit and detection position for source 18 = 0.619585 pixels
[Fri Nov 25 01:02:13 2011] Warning, changing simple spatial fit ID from 9 to 21
[Fri Nov 25 01:02:13 2011] 5499.203000 total counts/ 5193.550000 bgd. counts: snr = 4.241276
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.619585 pixels
  Position = (348.2, 370.4) = 14 45 11.00 -62 24 22.5
  Extent = 5.3 (4.5-6.5)", rotation angle = 0
  Source counts = 305.7 +/- 74.2
  Background counts = 5193.6
  Rate = 0.004 +/- 0.001
[Fri Nov 25 01:02:14 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:02:14 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 01:02:14 2011] Source does appear to be extended
[Fri Nov 25 01:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:02:14 2011] Source is confused with source 64
[Fri Nov 25 01:02:14 2011] Source is confused with source 60
[Fri Nov 25 23:57:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:57:19 2011] Initial guess for spatial extent in simple fitting = 5.29"
[Fri Nov 25 23:57:19 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.765
[Fri Nov 25 23:57:19 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 5.29"
[Sat Nov 26 11:49:31 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src9.ximg exists
[Sat Nov 26 11:49:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src9.csv
[Sat Nov 26 11:49:31 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Nov 26 11:49:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src9.csv
[Sat Nov 26 11:49:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 11:49:35 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Nov 26 11:49:35 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Nov 26 11:49:35 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sat Nov 26 11:51:33 2011] Spatial fit model total counts = 5377.870000, observed total counts = 5370.000000
[Sat Nov 26 11:51:33 2011] Offset between fit and detection position for source 18 = 0.113495 pixels
[Sat Nov 26 11:51:33 2011] 4542.967000 total counts/ 3906.870000 bgd. counts: snr = 10.176744
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.113495 pixels
  Position = (348.2, 370.5) = 14 45 10.98 -62 24 22.0
  Extent = 8.4 (7.1-10.6)", rotation angle = 0
  Source counts = 636.1 +/- 67.4
  Background counts = 3906.9
  Rate = 0.009 +/- 0.0009
[Sat Nov 26 11:51:34 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:34 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:34 2011] Source does appear to be extended
[Sat Nov 26 11:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:43:11 2011] XMMSAS src. selection expression = ellipse(30246.992360, 32184.410200, 505.345815, 505.345815, 0.000000, X, Y)
[Tue Nov 29 04:43:11 2011] Writing source region out to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src18_src.reg
[Tue Nov 29 04:43:11 2011] Extracting stamp from image fullrun_mos2_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (319, 341) - (377, 400)
[Tue Nov 29 04:43:11 2011] XMMSAS bgd. selection expression = annulus(30246.992360, 32184.410200, 842.243024, 1684.486048, X, Y) && !ellipse(28334.689200, 31088.467000, 1417.256041, 772.991222, 133.511100, X, Y) && !ellipse(28918.935600, 33527.008800, 918.664026, 918.664026, 0.000000, X, Y) && !ellipse(29025.231049, 33102.782562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30203.072200, 31496.608200, 1493.824043, 1493.824043, 0.000000, X, Y) && !ellipse(29946.839508, 31707.535461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29802.671417, 33592.237213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32715.126000, 42490.428000, 12589.488362, 12589.488362, 0.000000, X, Y) && !ellipse(30239.296295, 30411.389984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31232.000000, 29649.752000, 1464.752042, 1464.752042, 0.000000, X, Y) && !ellipse(30224.778000, 28356.614000, 2731.992079, 2731.992079, 0.000000, X, Y) && !ellipse(30216.060960, 30914.556000, 1439.496041, 1439.496041, 0.000000, X, Y) && !ellipse(32291.219119, 28734.899135, 1984.928057, 1745.993159, 43.668361, X, Y) && !ellipse(30361.816000, 29429.788000, 2166.640062, 2166.640062, 0.000000, X, Y) && !ellipse(27560.932000, 31419.048000, 1161.368033, 1161.368033, 0.000000, X, Y) && !ellipse(27914.556000, 34859.644000, 1664.240048, 1664.240048, 0.000000, X, Y) && !ellipse(27731.451202, 33618.617584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27713.365143, 33183.561829, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 04:43:11 2011] Writing fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src18.gif
[Tue Nov 29 05:25:32 2011] Mean detx,y = (-3946.24, 3973.14) 
[Tue Nov 29 05:25:34 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 05:26:15 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 05:26:15 2011] Setting source spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Nov 29 05:26:15 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed Nov 30 00:29:28 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:28 2011] Error reading totcts from fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Nov 30 00:29:36 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:36 2011] Using photon index=1.80, rate=0.00851, arf fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src18.arf
[Wed Nov 30 00:29:36 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:36 2011] Updating source flux to 1.2e-13
[Wed Nov 30 00:40:04 2011] Flag c found in src. 18 procflags, skipping spectral fitting