[Thu Nov 24 05:21:09 2011] Detection parameters:
  Position = (377.7, 497.9) = 14 44 52.78 -62 15 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 273.5 +/- 29.2
  Background counts = 166.2
  Rate = 0.004 +/- 0.0004

[Thu Nov 24 05:21:09 2011] Off-axis axis estimate = 15.56'
[Thu Nov 24 16:42:30 2011] Using EEF radius (= 14.21 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:42:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 16:42:30 2011] Initial guess for spatial extent in simple fitting = 14.21"
[Thu Nov 24 16:42:30 2011] source mask rpix=3.3, npix_max = 56, mask sum = 48, frac = 0.846
[Thu Nov 24 16:42:30 2011] Giving source the simple spatial ID 76 for pass 0, mean size = 14.21"
[Fri Nov 25 01:00:39 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src76.ximg exists
[Fri Nov 25 01:00:39 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src76_1.ximg exists
[Fri Nov 25 01:00:39 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src76 appears to have run properly
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Fri Nov 25 01:00:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src76.csv
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Fri Nov 25 01:00:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src76.csv
[Fri Nov 25 01:00:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 01:02:13 2011] Warning, spatial fit 76 centroid is now closest to src. 23
[Fri Nov 25 01:02:14 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:02:14 2011] Assessing source extent using major
[Fri Nov 25 01:02:14 2011] Source does appear to be extended
[Fri Nov 25 01:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 23:57:19 2011] Using EEF radius (= 14.21 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:57:19 2011] Initial guess for spatial extent in simple fitting = 14.21"
[Fri Nov 25 23:57:19 2011] source mask rpix=3.3, npix_max = 56, mask sum = 48, frac = 0.846
[Fri Nov 25 23:57:19 2011] Giving source the simple spatial ID 77 for pass 1, mean size = 14.21"
[Sat Nov 26 11:49:33 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src77.ximg exists
[Sat Nov 26 11:49:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src77.csv
[Sat Nov 26 11:49:33 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src77_1.ximg exists
[Sat Nov 26 11:49:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src77.csv
[Sat Nov 26 11:49:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Sat Nov 26 11:49:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src77.csv
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Sat Nov 26 11:49:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src77.csv
[Sat Nov 26 11:49:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 11:51:34 2011] Source 176 is offset by -5.579434 and -6.382901 pixels which is larger than
2 X fitted extent = 1.596281 x 1.596281, not incorporating fit results
[Sat Nov 26 11:51:34 2011] Warning: source 77 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 176 at 17.204514 pixels away
[Sat Nov 26 11:51:34 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:34 2011] Assessing source extent using major
[Sat Nov 26 11:51:34 2011] Source does appear to be extended
[Sat Nov 26 11:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 11:51:34 2011] Source is confused with source 3
[Sat Nov 26 11:51:34 2011] Source is confused with source 22
[Tue Nov 29 04:43:24 2011] XMMSAS src. selection expression = ellipse(32810.599243, 43267.697632, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 04:43:24 2011] Writing source region out to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src176_src.reg
[Tue Nov 29 04:43:24 2011] Extracting stamp from image fullrun_mos2_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (340, 460) - (415, 535)
[Tue Nov 29 04:43:24 2011] XMMSAS bgd. selection expression = annulus(32810.599243, 43267.697632, 1087.500000, 2175.000000, X, Y) && !ellipse(31594.946000, 41184.194000, 2783.448080, 2783.448080, 0.000000, X, Y) && !ellipse(31842.316000, 41559.746000, 2960.288085, 2960.288085, 0.000000, X, Y) && !ellipse(29423.002000, 39178.822000, 1986.152057, 1986.152057, 0.000000, X, Y) && !ellipse(32715.126000, 42490.428000, 12589.488362, 12589.488362, 0.000000, X, Y) && !ellipse(30289.370000, 39549.632000, 4262.304123, 4262.304123, 0.000000, X, Y) && !ellipse(30752.459400, 40835.362000, 1053.704030, 1053.704030, 0.000000, X, Y) && !ellipse(31098.074000, 40712.596000, 1480.144043, 1480.144043, 340.352000, X, Y) && !ellipse(30298.106000, 40222.136000, 1986.760057, 1986.760057, 0.000000, X, Y) && !ellipse(31299.572000, 39755.366000, 1490.792043, 1490.792043, 0.000000, X, Y)
[Tue Nov 29 04:43:24 2011] Writing fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src176.gif
[Tue Nov 29 08:47:41 2011] Mean detx,y = (-7991.39, 14409.39) 
[Tue Nov 29 08:47:43 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 08:48:14 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 08:48:14 2011] Setting source spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src176_src_b10.pi.gz
[Tue Nov 29 08:48:14 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src176_bgd.pi.gz
[Tue Nov 29 23:49:31 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 23:49:31 2011] rmf not generated due to insufficient counts
[Wed Nov 30 00:29:32 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:32 2011] Error reading totcts from fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src176_src_b10.pi.gz
[Wed Nov 30 00:29:39 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:39 2011] Using photon index=1.80, rate=0.00365, arf fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src176.arf
[Wed Nov 30 00:29:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:39 2011] Updating source flux to 1.4e-13
[Wed Nov 30 00:40:04 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting