[Thu Nov 24 05:21:09 2011] Detection parameters:
  Position = (313.0, 207.1) = 14 45 32.94 -62 36 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 454.5 +/- 30.9
  Background counts = 96.2
  Rate = 0.009 +/- 0.0006

[Thu Nov 24 05:21:09 2011] Off-axis axis estimate = 6.71'
[Thu Nov 24 16:42:30 2011] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:42:30 2011] Initial guess for spatial extent in simple fitting = 9.78"
[Thu Nov 24 16:42:30 2011] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.191
[Thu Nov 24 16:42:30 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 9.78"
[Fri Nov 25 01:00:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src28.ximg exists
[Fri Nov 25 01:00:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src28.csv
[Fri Nov 25 01:00:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri Nov 25 01:00:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src28.csv
[Fri Nov 25 01:00:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 01:00:41 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri Nov 25 01:00:41 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Nov 25 01:00:41 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Fri Nov 25 01:02:13 2011] Warning, spatial fit 28 centroid is now closest to src. 159
[Fri Nov 25 01:02:14 2011] Source 172 is offset by 7.541270 and 5.964636 pixels which is larger than
2 X fitted extent = 1.110763 x 1.110763, not incorporating fit results
[Fri Nov 25 01:02:14 2011] Spatial fit model total counts = 1847.790000, observed total counts = 1841.000000
[Fri Nov 25 01:02:14 2011] Offset between fit and detection position for source 172 = 0.357952 pixels
[Fri Nov 25 01:02:14 2011] Warning, changing simple spatial fit ID from 28 to 99
[Fri Nov 25 01:02:14 2011] 1769.897000 total counts/ 1633.770000 bgd. counts: snr = 3.367820
Spatial fit parameters:
  Offset between fit and detection position for source 172 = 0.357952 pixels
  Position = (313.1, 207.4) = 14 45 32.89 -62 36 11.6
  Extent = 8.0 (5.1-15.3)", rotation angle = 0
  Source counts = 136.1 +/- 42.1
  Background counts = 1633.8
  Rate = 0.002 +/- 0.0006
[Fri Nov 25 01:02:14 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:02:14 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 01:02:14 2011] Source does appear to be extended
[Fri Nov 25 01:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 23:57:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:57:19 2011] Initial guess for spatial extent in simple fitting = 7.98"
[Fri Nov 25 23:57:19 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.918
[Fri Nov 25 23:57:19 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 7.98"
[Sat Nov 26 11:49:31 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src29.ximg exists
[Sat Nov 26 11:49:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src29.csv
[Sat Nov 26 11:49:31 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src29_1.ximg exists
[Sat Nov 26 11:49:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src29.csv
[Sat Nov 26 11:49:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 11:49:36 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sat Nov 26 11:49:36 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sat Nov 26 11:49:36 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sat Nov 26 11:51:33 2011] Spatial fit model total counts = 2387.050000, observed total counts = 2394.000000
[Sat Nov 26 11:51:33 2011] Offset between fit and detection position for source 172 = 0.591322 pixels
[Sat Nov 26 11:51:33 2011] 2340.355000 total counts/ 1781.190000 bgd. counts: snr = 13.249054
Spatial fit parameters:
  Offset between fit and detection position for source 172 = 0.591322 pixels
  Position = (312.9, 206.9) = 14 45 33.06 -62 36 13.9
  Extent = 12.9 (10.1-15.7)", rotation angle = 0
  Source counts = 559.2 +/- 48.4
  Background counts = 1781.2
  Rate = 0.007 +/- 0.0006
[Sat Nov 26 11:51:34 2011] Spatial fit model total counts = 1844.590000, observed total counts = 1841.000000
[Sat Nov 26 11:51:34 2011] Offset between fit and detection position for source 172 = 0.555290 pixels
[Sat Nov 26 11:51:34 2011] Warning, changing simple spatial fit ID from 29 to 99
[Sat Nov 26 11:51:34 2011] 1767.526000 total counts/ 1624.500000 bgd. counts: snr = 3.548584
Spatial fit parameters:
  Offset between fit and detection position for source 172 = 0.555290 pixels
  Position = (313.1, 207.4) = 14 45 32.94 -62 36 11.6
  Extent = 8.4 (6.2-15.0)", rotation angle = 0
  Source counts = 143.0 +/- 42.0
  Background counts = 1624.5
  Rate = 0.002 +/- 0.0006
[Sat Nov 26 11:51:34 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:34 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:34 2011] Source does appear to be extended
[Sat Nov 26 11:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 11:51:34 2011] Source is confused with source 154
[Tue Nov 29 04:43:14 2011] XMMSAS src. selection expression = ellipse(27187.184000, 17997.246000, 506.128815, 506.128815, 0.000000, X, Y)
[Tue Nov 29 04:43:14 2011] Writing source region out to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src172_src.reg
[Tue Nov 29 04:43:14 2011] Extracting stamp from image fullrun_mos2_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (284, 178) - (342, 237)
[Tue Nov 29 04:43:14 2011] XMMSAS bgd. selection expression = annulus(27187.184000, 17997.246000, 843.548024, 1687.096049, X, Y) && !ellipse(28338.770000, 19799.480000, 1515.544044, 1515.544044, 0.000000, X, Y) && !ellipse(27450.823600, 20489.535320, 1117.864032, 1117.864032, 0.000000, X, Y) && !ellipse(28403.417600, 19722.993200, 654.893619, 654.893619, 0.000000, X, Y) && !ellipse(28074.764800, 20182.610000, 2512.384072, 2512.384072, 0.000000, X, Y) && !ellipse(28940.214355, 19266.641663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27419.492000, 18632.994000, 1499.480043, 1499.480043, 0.000000, X, Y) && !ellipse(25561.360352, 18831.709366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28030.290680, 18330.564621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28970.436554, 15788.241318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26380.834000, 20194.031000, 1404.248040, 1404.248040, 0.000000, X, Y) && !ellipse(25814.743073, 18152.357727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25605.447400, 19969.652000, 1333.416038, 1333.416038, 0.000000, X, Y) && !ellipse(27837.567413, 17446.101349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28708.398438, 17708.491257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26582.373108, 19546.614502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26727.321777, 19965.217041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26514.457458, 18562.085831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29383.139618, 18391.217438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28618.000000, 16478.459991, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 04:43:14 2011] Writing fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src172.gif
[Tue Nov 29 06:35:26 2011] Mean detx,y = (1050.95, -9655.00) 
[Tue Nov 29 06:35:28 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 06:35:44 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 06:35:44 2011] Setting source spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src172_src_b10.pi.gz
[Tue Nov 29 06:35:44 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src172_bgd.pi.gz
[Wed Nov 30 00:29:29 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:29 2011] Error reading totcts from fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src172_src_b10.pi.gz
[Wed Nov 30 00:29:37 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:37 2011] Using photon index=1.80, rate=0.00191, arf fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src172.arf
[Wed Nov 30 00:29:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:37 2011] Updating source flux to 3.2e-14
[Wed Nov 30 00:40:04 2011] Flag b found in src. 172 procflags, skipping spectral fitting
[Wed Nov 30 00:40:04 2011] Flag c found in src. 172 procflags, skipping spectral fitting