[Thu Nov 24 05:21:08 2011] Detection parameters:
  Position = (294.4, 217.0) = 14 45 44.71 -62 35 28.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 217.8 +/- 23.2
  Background counts = 88.2
  Rate = 0.004 +/- 0.0005

[Thu Nov 24 05:21:09 2011] Off-axis axis estimate = 5.91'
[Thu Nov 24 16:42:30 2011] Using EEF radius (= 9.38 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:42:30 2011] Initial guess for spatial extent in simple fitting = 9.38"
[Thu Nov 24 16:42:30 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.062
[Thu Nov 24 16:42:30 2011] Giving source the simple spatial ID 67 for pass 0, mean size = 9.38"
[Fri Nov 25 01:00:38 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src67.ximg exists
[Fri Nov 25 01:00:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src67.csv
[Fri Nov 25 01:00:38 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src67_1.ximg exists
[Fri Nov 25 01:00:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src67.csv
[Fri Nov 25 01:00:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Fri Nov 25 01:00:42 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Fri Nov 25 01:02:13 2011] Warning, spatial fit 67 centroid is now closest to src. 148
[Fri Nov 25 01:02:14 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:02:14 2011] Assessing source extent using major
[Fri Nov 25 01:02:14 2011] Source does appear to be extended
[Fri Nov 25 01:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 23:57:19 2011] Using EEF radius (= 9.38 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:57:19 2011] Initial guess for spatial extent in simple fitting = 9.38"
[Fri Nov 25 23:57:19 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.062
[Fri Nov 25 23:57:19 2011] Giving source the simple spatial ID 68 for pass 1, mean size = 9.38"
[Sat Nov 26 11:49:33 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src68.ximg exists
[Sat Nov 26 11:49:33 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src68_1.ximg exists
[Sat Nov 26 11:49:33 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src68 appears to have run properly
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Sat Nov 26 11:49:37 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src68 appears to have run properly
[Sat Nov 26 11:51:34 2011] Warning, spatial fit 68 centroid is now closest to src. 148
[Sat Nov 26 11:51:34 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:34 2011] Assessing source extent using major
[Sat Nov 26 11:51:34 2011] Source does appear to be extended
[Sat Nov 26 11:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:43:23 2011] XMMSAS src. selection expression = ellipse(25561.360352, 18831.709366, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 04:43:23 2011] Writing source region out to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src160_src.reg
[Tue Nov 29 04:43:23 2011] Extracting stamp from image fullrun_mos2_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (257, 180) - (332, 255)
[Tue Nov 29 04:43:23 2011] XMMSAS bgd. selection expression = annulus(25561.360352, 18831.709366, 1087.500000, 2175.000000, X, Y) && !ellipse(28214.960400, 20640.399000, 677.336019, 677.336019, 0.000000, X, Y) && !ellipse(27642.098000, 21478.286000, 999.408029, 999.408029, 0.000000, X, Y) && !ellipse(28338.770000, 19799.480000, 1515.544044, 1515.544044, 0.000000, X, Y) && !ellipse(27187.184000, 17997.246000, 674.838419, 674.838419, 0.000000, X, Y) && !ellipse(27450.823600, 20489.535320, 1117.864032, 1117.864032, 0.000000, X, Y) && !ellipse(28074.764800, 20182.610000, 2512.384072, 2512.384072, 0.000000, X, Y) && !ellipse(27663.564000, 22092.876000, 1309.008038, 314.276009, 85.672660, X, Y) && !ellipse(27419.492000, 18632.994000, 1499.480043, 1499.480043, 0.000000, X, Y) && !ellipse(27658.144000, 21856.566000, 1227.280035, 1227.280035, 0.000000, X, Y) && !ellipse(28120.497955, 21591.195480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28030.290680, 18330.564621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26380.834000, 20194.031000, 1404.248040, 1404.248040, 0.000000, X, Y) && !ellipse(25814.743073, 18152.357727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25605.447400, 19969.652000, 1333.416038, 1333.416038, 0.000000, X, Y) && !ellipse(27837.567413, 17446.101349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26582.373108, 19546.614502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26727.321777, 19965.217041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26514.457458, 18562.085831, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 04:43:23 2011] Writing fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src160.gif
[Tue Nov 29 08:41:00 2011] Mean detx,y = (2493.41, -8611.44) 
[Tue Nov 29 08:41:02 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 08:41:15 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 08:41:16 2011] Setting source spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src160_src_b10.pi.gz
[Tue Nov 29 08:41:16 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src160_bgd.pi.gz
[Tue Nov 29 23:30:02 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 23:30:02 2011] rmf not generated due to insufficient counts
[Wed Nov 30 00:29:32 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:32 2011] Error reading totcts from fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src160_src_b10.pi.gz
[Wed Nov 30 00:29:39 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:39 2011] Using photon index=1.80, rate=0.0044, arf fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src160.arf
[Wed Nov 30 00:29:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:39 2011] Updating source flux to 6.6e-14
[Wed Nov 30 00:40:04 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting