[Thu Nov 24 05:21:08 2011] Detection parameters:
  Position = (333.2, 222.0) = 14 45 20.25 -62 34 60.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 269.5 +/- 29.7
  Background counts = 98.9
  Rate = 0.006 +/- 0.0007

[Thu Nov 24 05:21:09 2011] Off-axis axis estimate = 6.09'
[Thu Nov 24 16:42:30 2011] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:42:30 2011] Initial guess for spatial extent in simple fitting = 9.47"
[Thu Nov 24 16:42:30 2011] source mask rpix=2.2, npix_max = 28, mask sum = 27, frac = 0.942
[Thu Nov 24 16:42:30 2011] Giving source the simple spatial ID 50 for pass 0, mean size = 9.47"
[Fri Nov 25 01:00:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src50.ximg exists
[Fri Nov 25 01:00:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src50.csv
[Fri Nov 25 01:00:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src50_1.ximg exists
[Fri Nov 25 01:00:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src50.csv
[Fri Nov 25 01:00:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Fri Nov 25 01:00:42 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Fri Nov 25 01:02:13 2011] Warning, spatial fit 50 centroid is now closest to src. 156
[Fri Nov 25 01:02:14 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:02:14 2011] Assessing source extent using major
[Fri Nov 25 01:02:14 2011] Source does appear to be extended
[Fri Nov 25 01:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:02:14 2011] Source is confused with source 156
[Fri Nov 25 01:02:14 2011] Source is confused with source 153
[Fri Nov 25 23:57:19 2011] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:57:19 2011] Initial guess for spatial extent in simple fitting = 9.47"
[Fri Nov 25 23:57:19 2011] source mask rpix=2.2, npix_max = 28, mask sum = 27, frac = 0.942
[Fri Nov 25 23:57:19 2011] Giving source the simple spatial ID 51 for pass 1, mean size = 9.47"
[Sat Nov 26 11:49:32 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src51.ximg exists
[Sat Nov 26 11:49:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src51.csv
[Sat Nov 26 11:49:32 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src51_1.ximg exists
[Sat Nov 26 11:49:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src51.csv
[Sat Nov 26 11:49:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 11:49:36 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sat Nov 26 11:49:36 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sat Nov 26 11:49:36 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Sat Nov 26 11:51:34 2011] Warning, spatial fit 51 centroid is now closest to src. 147
[Sat Nov 26 11:51:34 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:34 2011] Assessing source extent using major
[Sat Nov 26 11:51:34 2011] Source does appear to be extended
[Sat Nov 26 11:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:43:18 2011] XMMSAS src. selection expression = ellipse(28940.214355, 19266.641663, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 04:43:18 2011] Writing source region out to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src150_src.reg
[Tue Nov 29 04:43:18 2011] Extracting stamp from image fullrun_mos2_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (296, 185) - (371, 260)
[Tue Nov 29 04:43:19 2011] XMMSAS bgd. selection expression = annulus(28940.214355, 19266.641663, 1087.500000, 2175.000000, X, Y) && !ellipse(26043.432600, 23564.740000, 2284.624066, 1643.816047, 31.797900, X, Y) && !ellipse(25838.926400, 22815.724000, 1551.240045, 1551.240045, 0.000000, X, Y) && !ellipse(28214.960400, 20640.399000, 677.336019, 677.336019, 0.000000, X, Y) && !ellipse(27642.098000, 21478.286000, 999.408029, 999.408029, 0.000000, X, Y) && !ellipse(28338.770000, 19799.480000, 1515.544044, 1515.544044, 0.000000, X, Y) && !ellipse(27187.184000, 17997.246000, 674.838419, 674.838419, 0.000000, X, Y) && !ellipse(27450.823600, 20489.535320, 1117.864032, 1117.864032, 0.000000, X, Y) && !ellipse(28403.417600, 19722.993200, 654.893619, 654.893619, 0.000000, X, Y) && !ellipse(28074.764800, 20182.610000, 2512.384072, 2512.384072, 0.000000, X, Y) && !ellipse(27663.564000, 22092.876000, 1309.008038, 314.276009, 85.672660, X, Y) && !ellipse(27419.492000, 18632.994000, 1499.480043, 1499.480043, 0.000000, X, Y) && !ellipse(27658.144000, 21856.566000, 1227.280035, 1227.280035, 0.000000, X, Y) && !ellipse(28120.497955, 21591.195480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27249.358948, 22242.265747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28030.290680, 18330.564621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26380.834000, 20194.031000, 1404.248040, 1404.248040, 0.000000, X, Y) && !ellipse(29235.334000, 22481.044000, 1345.368039, 1345.368039, 0.000000, X, Y) && !ellipse(25605.447400, 19969.652000, 1333.416038, 1333.416038, 0.000000, X, Y) && !ellipse(27837.567413, 17446.101349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28708.398438, 17708.491257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26582.373108, 19546.614502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26727.321777, 19965.217041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26514.457458, 18562.085831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29383.139618, 18391.217438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28618.000000, 16478.459991, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 04:43:19 2011] Writing fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src150.gif
[Tue Nov 29 07:32:49 2011] Mean detx,y = (-815.95, -8564.38) 
[Tue Nov 29 07:32:51 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 07:33:10 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 07:33:10 2011] Setting source spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src150_src_b10.pi.gz
[Tue Nov 29 07:33:10 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src150_bgd.pi.gz
[Tue Nov 29 22:18:25 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 22:18:25 2011] rmf not generated due to insufficient counts
[Wed Nov 30 00:29:30 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:30 2011] Error reading totcts from fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src150_src_b10.pi.gz
[Wed Nov 30 00:29:38 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:38 2011] Using photon index=1.80, rate=0.00627, arf fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src150.arf
[Wed Nov 30 00:29:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:38 2011] Updating source flux to 9e-14
[Wed Nov 30 00:40:04 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting