[Thu Nov 24 05:21:08 2011] Detection parameters:
  Position = (300.4, 233.7) = 14 45 40.89 -62 34 16.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 191.3 +/- 22.9
  Background counts = 110.7
  Rate = 0.003 +/- 0.0004

[Thu Nov 24 05:21:09 2011] Off-axis axis estimate = 4.70'
[Thu Nov 24 16:42:30 2011] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:42:30 2011] Initial guess for spatial extent in simple fitting = 8.78"
[Thu Nov 24 16:42:30 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.986
[Thu Nov 24 16:42:30 2011] Giving source the simple spatial ID 79 for pass 0, mean size = 8.78"
[Fri Nov 25 01:00:39 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src79.ximg exists
[Fri Nov 25 01:00:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src79.csv
[Fri Nov 25 01:00:39 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src79_1.ximg exists
[Fri Nov 25 01:00:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src79.csv
[Fri Nov 25 01:00:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Fri Nov 25 01:00:42 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src79 appears to have run properly
[Fri Nov 25 01:02:13 2011] Source 149 is offset by -4.031612 and -3.597058 pixels which is larger than
2 X fitted extent = 2.542170 x 2.542170, not incorporating fit results
[Fri Nov 25 01:02:13 2011] Spatial fit model total counts = 1685.440000, observed total counts = 1683.000000
[Fri Nov 25 01:02:13 2011] Offset between fit and detection position for source 149 = 3.510571 pixels
[Fri Nov 25 01:02:13 2011] 1506.995000 total counts/ 708.204000 bgd. counts: snr = 30.016080
Spatial fit parameters:
  Offset between fit and detection position for source 149 = 3.510571 pixels
  Position = (303.8, 232.7) = 14 45 38.78 -62 34 21.8
  Extent = 17.6 (17.5-35.1)", rotation angle = 0
  Source counts = 798.8 +/- 38.8
  Background counts = 708.2
  Rate = 0.01 +/- 0.0005
[Fri Nov 25 01:02:14 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:02:14 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 01:02:14 2011] Source does appear to be extended
[Fri Nov 25 01:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:02:14 2011] Source is confused with source 142
[Fri Nov 25 01:02:14 2011] Source is confused with source 148
[Fri Nov 25 01:02:14 2011] Source is confused with source 144
[Fri Nov 25 23:57:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:57:19 2011] Initial guess for spatial extent in simple fitting = 17.55"
[Fri Nov 25 23:57:19 2011] source mask rpix=4.0, npix_max = 82, mask sum = 81, frac = 0.985
[Fri Nov 25 23:57:19 2011] Giving source the simple spatial ID 80 for pass 1, mean size = 17.55"
[Sat Nov 26 11:49:33 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src80.ximg exists
[Sat Nov 26 11:49:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src80.csv
[Sat Nov 26 11:49:33 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src80_1.ximg exists
[Sat Nov 26 11:49:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src80.csv
[Sat Nov 26 11:49:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src80.ximg exists
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src80_1.ximg exists
[Sat Nov 26 11:49:37 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src80 appears to have run properly
[Sat Nov 26 11:51:34 2011] Warning, spatial fit 80 centroid is now closest to src. 123
[Sat Nov 26 11:51:34 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:34 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:34 2011] Source does appear to be extended
[Sat Nov 26 11:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:43:24 2011] XMMSAS src. selection expression = ellipse(26380.834000, 20194.031000, 1053.186030, 1053.186030, 0.000000, X, Y)
[Tue Nov 29 04:43:24 2011] Writing source region out to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src149_src.reg
[Tue Nov 29 04:43:24 2011] Extracting stamp from image fullrun_mos2_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (243, 172) - (364, 293)
[Tue Nov 29 04:43:24 2011] XMMSAS bgd. selection expression = annulus(26380.834000, 20194.031000, 1755.310051, 3510.620101, X, Y) && !ellipse(26043.432600, 23564.740000, 2284.624066, 1643.816047, 31.797900, X, Y) && !ellipse(25838.926400, 22815.724000, 1551.240045, 1551.240045, 0.000000, X, Y) && !ellipse(25878.018384, 23165.672000, 1266.568036, 1266.568036, 0.000000, X, Y) && !ellipse(28214.960400, 20640.399000, 677.336019, 677.336019, 0.000000, X, Y) && !ellipse(27642.098000, 21478.286000, 999.408029, 999.408029, 0.000000, X, Y) && !ellipse(28338.770000, 19799.480000, 1515.544044, 1515.544044, 0.000000, X, Y) && !ellipse(27187.184000, 17997.246000, 674.838419, 674.838419, 0.000000, X, Y) && !ellipse(27450.823600, 20489.535320, 1117.864032, 1117.864032, 0.000000, X, Y) && !ellipse(28403.417600, 19722.993200, 654.893619, 654.893619, 0.000000, X, Y) && !ellipse(28074.764800, 20182.610000, 2512.384072, 2512.384072, 0.000000, X, Y) && !ellipse(29178.244060, 22887.227600, 796.143223, 796.143223, 0.000000, X, Y) && !ellipse(27663.564000, 22092.876000, 1309.008038, 314.276009, 85.672660, X, Y) && !ellipse(28940.214355, 19266.641663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27419.492000, 18632.994000, 1499.480043, 1499.480043, 0.000000, X, Y) && !ellipse(27658.144000, 21856.566000, 1227.280035, 1227.280035, 0.000000, X, Y) && !ellipse(28120.497955, 21591.195480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22901.283844, 22864.092194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29611.905800, 23851.468400, 1038.824030, 1038.824030, 0.000000, X, Y) && !ellipse(25561.360352, 18831.709366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24993.300903, 24572.566376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27249.358948, 22242.265747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26984.665802, 24527.014038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29762.242000, 24268.984000, 1278.544037, 1278.544037, 0.000000, X, Y) && !ellipse(28030.290680, 18330.564621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27772.829834, 22894.582550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27083.286865, 24178.660919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27237.549377, 23364.838684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29235.334000, 22481.044000, 1345.368039, 1345.368039, 0.000000, X, Y) && !ellipse(25814.743073, 18152.357727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25605.447400, 19969.652000, 1333.416038, 1333.416038, 0.000000, X, Y) && !ellipse(28340.156494, 22478.072174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27837.567413, 17446.101349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28708.398438, 17708.491257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26582.373108, 19546.614502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26727.321777, 19965.217041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26514.457458, 18562.085831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29383.139618, 18391.217438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28618.000000, 16478.459991, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 04:43:24 2011] Writing fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src149.gif
[Tue Nov 29 08:49:53 2011] Mean detx,y = (1492.98, -7363.34) 
[Tue Nov 29 08:49:55 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 08:50:34 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 08:50:35 2011] Setting source spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src149_src_b10.pi.gz
[Tue Nov 29 08:50:35 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src149_bgd.pi.gz
[Wed Nov 30 00:29:32 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:32 2011] Error reading totcts from fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src149_src_b10.pi.gz
[Wed Nov 30 00:29:39 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:39 2011] Using photon index=1.80, rate=0.0107, arf fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src149.arf
[Wed Nov 30 00:29:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:39 2011] Updating source flux to 1.4e-13
[Wed Nov 30 00:40:04 2011] Flag b found in src. 149 procflags, skipping spectral fitting
[Wed Nov 30 00:40:04 2011] Flag c found in src. 149 procflags, skipping spectral fitting