[Thu Nov 24 05:21:08 2011] Detection parameters:
  Position = (333.6, 182.0) = 14 45 19.99 -62 38 3.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.9 +/- 19.1
  Background counts = 86.3
  Rate = 0.004 +/- 0.0005

[Thu Nov 24 05:21:09 2011] Off-axis axis estimate = 8.81'
[Thu Nov 24 16:42:30 2011] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:42:30 2011] Initial guess for spatial extent in simple fitting = 10.84"
[Thu Nov 24 16:42:30 2011] source mask rpix=2.5, npix_max = 35, mask sum = 34, frac = 0.950
[Thu Nov 24 16:42:30 2011] Giving source the simple spatial ID 78 for pass 0, mean size = 10.84"
[Fri Nov 25 01:00:39 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src78.ximg exists
[Fri Nov 25 01:00:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src78.csv
[Fri Nov 25 01:00:39 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src78_1.ximg exists
[Fri Nov 25 01:00:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src78.csv
[Fri Nov 25 01:00:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src78.ximg exists
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src78_1.ximg exists
[Fri Nov 25 01:00:42 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src78 appears to have run properly
[Fri Nov 25 01:02:13 2011] Warning, spatial fit 78 centroid is now closest to src. 175
[Fri Nov 25 01:02:14 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:02:14 2011] Assessing source extent using major
[Fri Nov 25 01:02:14 2011] Source does appear to be extended
[Fri Nov 25 01:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 23:57:19 2011] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:57:19 2011] Initial guess for spatial extent in simple fitting = 10.84"
[Fri Nov 25 23:57:19 2011] source mask rpix=2.5, npix_max = 35, mask sum = 34, frac = 0.950
[Fri Nov 25 23:57:19 2011] Giving source the simple spatial ID 79 for pass 1, mean size = 10.84"
[Sat Nov 26 11:49:33 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src79.ximg exists
[Sat Nov 26 11:49:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src79.csv
[Sat Nov 26 11:49:33 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src79_1.ximg exists
[Sat Nov 26 11:49:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src79.csv
[Sat Nov 26 11:49:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Sat Nov 26 11:49:37 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src79 appears to have run properly
[Sat Nov 26 11:51:34 2011] Warning: source 79 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 134 at 12.988720 pixels away
[Sat Nov 26 11:51:34 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:34 2011] Assessing source extent using major
[Sat Nov 26 11:51:34 2011] Source does appear to be extended
[Sat Nov 26 11:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:43:24 2011] XMMSAS src. selection expression = ellipse(28970.436554, 15788.241318, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 04:43:24 2011] Writing source region out to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src134_src.reg
[Tue Nov 29 04:43:24 2011] Extracting stamp from image fullrun_mos2_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (296, 145) - (371, 220)
[Tue Nov 29 04:43:24 2011] XMMSAS bgd. selection expression = annulus(28970.436554, 15788.241318, 1087.500000, 2175.000000, X, Y) && !ellipse(27187.184000, 17997.246000, 674.838419, 674.838419, 0.000000, X, Y) && !ellipse(28074.764800, 20182.610000, 2512.384072, 2512.384072, 0.000000, X, Y) && !ellipse(27419.492000, 18632.994000, 1499.480043, 1499.480043, 0.000000, X, Y) && !ellipse(28030.290680, 18330.564621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27837.567413, 17446.101349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28708.398438, 17708.491257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26514.457458, 18562.085831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29383.139618, 18391.217438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28618.000000, 16478.459991, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 04:43:24 2011] Writing fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src134.gif
[Tue Nov 29 08:49:02 2011] Mean detx,y = (-488.17, -12066.61) 
[Tue Nov 29 08:49:05 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 08:49:37 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 08:49:38 2011] Setting source spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src134_src_b10.pi.gz
[Tue Nov 29 08:49:38 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src134_bgd.pi.gz
[Tue Nov 29 23:49:45 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 23:49:45 2011] rmf not generated due to insufficient counts
[Wed Nov 30 00:29:32 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:32 2011] Error reading totcts from fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src134_src_b10.pi.gz
[Wed Nov 30 00:29:39 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:39 2011] Using photon index=1.80, rate=0.00362, arf fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src134.arf
[Wed Nov 30 00:29:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:39 2011] Updating source flux to 9.8e-14
[Wed Nov 30 00:40:04 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting