[Thu Nov 24 05:21:07 2011] Detection parameters:
  Position = (329.1, 253.3) = 14 45 22.83 -62 32 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.3 +/- 23.9
  Background counts = 145.6
  Rate = 0.003 +/- 0.0004

[Thu Nov 24 05:21:09 2011] Off-axis axis estimate = 3.96'
[Thu Nov 24 16:42:30 2011] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:42:30 2011] Initial guess for spatial extent in simple fitting = 8.41"
[Thu Nov 24 16:42:30 2011] source mask rpix=1.9, npix_max = 23, mask sum = 22, frac = 0.929
[Thu Nov 24 16:42:30 2011] Giving source the simple spatial ID 89 for pass 0, mean size = 8.41"
[Fri Nov 25 01:00:39 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src89.ximg exists
[Fri Nov 25 01:00:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src89.csv
[Fri Nov 25 01:00:39 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src89_1.ximg exists
[Fri Nov 25 01:00:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src89.csv
[Fri Nov 25 01:00:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src89_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 01:00:43 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src89.ximg exists
[Fri Nov 25 01:00:43 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src89_1.ximg exists
[Fri Nov 25 01:00:43 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src89 appears to have run properly
[Fri Nov 25 01:02:14 2011] Spatial fit model total counts = 2709.640000, observed total counts = 2713.000000
[Fri Nov 25 01:02:14 2011] Offset between fit and detection position for source 124 = 9.375368 pixels
[Fri Nov 25 01:02:14 2011] 2634.137000 total counts/ 2170.840000 bgd. counts: snr = 9.943644
Spatial fit parameters:
  Offset between fit and detection position for source 124 = 9.375368 pixels
  Position = (336.6, 259.0) = 14 45 18.15 -62 32 27.3
  Extent = 16.8 (16.8-33.6)", rotation angle = 0
  Source counts = 463.3 +/- 51.3
  Background counts = 2170.8
  Rate = 0.006 +/- 0.0007
[Fri Nov 25 01:02:14 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:02:14 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 01:02:14 2011] Source does appear to be extended
[Fri Nov 25 01:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:02:14 2011] Source is confused with source 120
[Fri Nov 25 23:57:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:57:19 2011] Initial guess for spatial extent in simple fitting = 16.82"
[Fri Nov 25 23:57:19 2011] source mask rpix=3.9, npix_max = 76, mask sum = 72, frac = 0.944
[Fri Nov 25 23:57:19 2011] Giving source the simple spatial ID 89 for pass 1, mean size = 16.82"
[Sat Nov 26 11:49:34 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src89.ximg exists
[Sat Nov 26 11:49:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src89.csv
[Sat Nov 26 11:49:34 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src89_1.ximg exists
[Sat Nov 26 11:49:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src89.csv
[Sat Nov 26 11:49:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src89_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src89.ximg exists
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src89_1.ximg exists
[Sat Nov 26 11:49:38 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src89 appears to have run properly
[Sat Nov 26 11:51:34 2011] Warning, spatial fit 89 centroid is now closest to src. 101
[Sat Nov 26 11:51:34 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:34 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:34 2011] Source does appear to be extended
[Sat Nov 26 11:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:43:26 2011] XMMSAS src. selection expression = ellipse(29235.334000, 22481.044000, 1009.026029, 1009.026029, 0.000000, X, Y)
[Tue Nov 29 04:43:26 2011] Writing source region out to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src124_src.reg
[Tue Nov 29 04:43:26 2011] Extracting stamp from image fullrun_mos2_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (279, 201) - (395, 317)
[Tue Nov 29 04:43:26 2011] XMMSAS bgd. selection expression = annulus(29235.334000, 22481.044000, 1681.710048, 3363.420097, X, Y) && !ellipse(26668.119540, 25833.732200, 1078.000031, 1078.000031, 0.000000, X, Y) && !ellipse(26043.432600, 23564.740000, 2284.624066, 1643.816047, 31.797900, X, Y) && !ellipse(26613.252000, 25264.346000, 976.216028, 976.216028, 0.000000, X, Y) && !ellipse(26424.450000, 24509.666000, 585.609617, 585.609617, 0.000000, X, Y) && !ellipse(25838.926400, 22815.724000, 1551.240045, 1551.240045, 0.000000, X, Y) && !ellipse(28763.042960, 25369.424400, 576.191217, 576.191217, 0.000000, X, Y) && !ellipse(25878.018384, 23165.672000, 1266.568036, 1266.568036, 0.000000, X, Y) && !ellipse(28214.960400, 20640.399000, 677.336019, 677.336019, 0.000000, X, Y) && !ellipse(27642.098000, 21478.286000, 999.408029, 999.408029, 0.000000, X, Y) && !ellipse(28338.770000, 19799.480000, 1515.544044, 1515.544044, 0.000000, X, Y) && !ellipse(27450.823600, 20489.535320, 1117.864032, 1117.864032, 0.000000, X, Y) && !ellipse(28403.417600, 19722.993200, 654.893619, 654.893619, 0.000000, X, Y) && !ellipse(27928.621643, 25118.926270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27216.598541, 24902.628998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28074.764800, 20182.610000, 2512.384072, 2512.384072, 0.000000, X, Y) && !ellipse(29178.244060, 22887.227600, 796.143223, 796.143223, 0.000000, X, Y) && !ellipse(27663.564000, 22092.876000, 1309.008038, 314.276009, 85.672660, X, Y) && !ellipse(28940.214355, 19266.641663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27419.492000, 18632.994000, 1499.480043, 1499.480043, 0.000000, X, Y) && !ellipse(27658.144000, 21856.566000, 1227.280035, 1227.280035, 0.000000, X, Y) && !ellipse(30224.778000, 28356.614000, 2731.992079, 2731.992079, 0.000000, X, Y) && !ellipse(28120.497955, 21591.195480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29611.905800, 23851.468400, 1038.824030, 1038.824030, 0.000000, X, Y) && !ellipse(25561.360352, 18831.709366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27249.358948, 22242.265747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26984.665802, 24527.014038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29762.242000, 24268.984000, 1278.544037, 1278.544037, 0.000000, X, Y) && !ellipse(28030.290680, 18330.564621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26380.834000, 20194.031000, 1404.248040, 1404.248040, 0.000000, X, Y) && !ellipse(27772.829834, 22894.582550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27083.286865, 24178.660919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27237.549377, 23364.838684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25605.447400, 19969.652000, 1333.416038, 1333.416038, 0.000000, X, Y) && !ellipse(28340.156494, 22478.072174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26582.373108, 19546.614502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33124.537872, 21344.841949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26727.321777, 19965.217041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26514.457458, 18562.085831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29383.139618, 18391.217438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32764.855743, 23423.873260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30540.640000, 28088.712000, 2375.896068, 2375.896068, 0.000000, X, Y)
[Tue Nov 29 04:43:26 2011] Writing fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src124.gif
[Tue Nov 29 08:59:56 2011] Mean detx,y = (-1546.85, -5400.27) 
[Tue Nov 29 08:59:58 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 09:00:41 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 09:00:41 2011] Setting source spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src124_src_b10.pi.gz
[Tue Nov 29 09:00:41 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src124_bgd.pi.gz
[Wed Nov 30 00:29:33 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:33 2011] Error reading totcts from fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src124_src_b10.pi.gz
[Wed Nov 30 00:29:39 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:39 2011] Using photon index=1.80, rate=0.00619, arf fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src124.arf
[Wed Nov 30 00:29:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:39 2011] Updating source flux to 6.9e-14
[Wed Nov 30 00:40:04 2011] Flag c found in src. 124 procflags, skipping spectral fitting