[Thu Nov 24 05:21:07 2011] Detection parameters:
  Position = (263.8, 263.4) = 14 46 3.93 -62 32 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 312.7 +/- 24.8
  Background counts = 80.3
  Rate = 0.005 +/- 0.0004

[Thu Nov 24 05:21:09 2011] Off-axis axis estimate = 3.57'
[Thu Nov 24 16:42:30 2011] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:42:30 2011] Initial guess for spatial extent in simple fitting = 8.22"
[Thu Nov 24 16:42:30 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.095
[Thu Nov 24 16:42:30 2011] Giving source the simple spatial ID 58 for pass 0, mean size = 8.22"
[Fri Nov 25 01:00:38 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src58.ximg exists
[Fri Nov 25 01:00:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src58.csv
[Fri Nov 25 01:00:38 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src58_1.ximg exists
[Fri Nov 25 01:00:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src58.csv
[Fri Nov 25 01:00:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Fri Nov 25 01:00:42 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src58 appears to have run properly
[Fri Nov 25 01:02:13 2011] Warning: source 58 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 115 at 11.286352 pixels away
[Fri Nov 25 01:02:14 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:02:14 2011] Assessing source extent using major
[Fri Nov 25 01:02:14 2011] Source does appear to be extended
[Fri Nov 25 01:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 23:57:19 2011] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:57:19 2011] Initial guess for spatial extent in simple fitting = 8.22"
[Fri Nov 25 23:57:19 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.095
[Fri Nov 25 23:57:19 2011] Giving source the simple spatial ID 59 for pass 1, mean size = 8.22"
[Sat Nov 26 11:49:32 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src59.ximg exists
[Sat Nov 26 11:49:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src59.csv
[Sat Nov 26 11:49:32 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src59_1.ximg exists
[Sat Nov 26 11:49:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src59.csv
[Sat Nov 26 11:49:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Sat Nov 26 11:49:37 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Sat Nov 26 11:51:34 2011] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 115 at 11.286352 pixels away
[Sat Nov 26 11:51:34 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:34 2011] Assessing source extent using major
[Sat Nov 26 11:51:34 2011] Source does appear to be extended
[Sat Nov 26 11:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:43:21 2011] XMMSAS src. selection expression = ellipse(22901.283844, 22864.092194, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 04:43:21 2011] Writing source region out to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src115_src.reg
[Tue Nov 29 04:43:21 2011] Extracting stamp from image fullrun_mos2_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (226, 226) - (301, 301)
[Tue Nov 29 04:43:21 2011] XMMSAS bgd. selection expression = annulus(22901.283844, 22864.092194, 1087.500000, 2175.000000, X, Y) && !ellipse(26043.432600, 23564.740000, 2284.624066, 1643.816047, 31.797900, X, Y) && !ellipse(25838.926400, 22815.724000, 1551.240045, 1551.240045, 0.000000, X, Y) && !ellipse(25878.018384, 23165.672000, 1266.568036, 1266.568036, 0.000000, X, Y) && !ellipse(25017.459800, 25138.974000, 500.624814, 500.624814, 0.000000, X, Y) && !ellipse(24993.300903, 24572.566376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26380.834000, 20194.031000, 1404.248040, 1404.248040, 0.000000, X, Y) && !ellipse(25605.447400, 19969.652000, 1333.416038, 1333.416038, 0.000000, X, Y)
[Tue Nov 29 04:43:21 2011] Writing fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src115.gif
[Tue Nov 29 08:05:48 2011] Mean detx,y = (4585.53, -4231.89) 
[Tue Nov 29 08:05:51 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 08:06:10 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 08:06:10 2011] Setting source spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src115_src_b10.pi.gz
[Tue Nov 29 08:06:10 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src115_bgd.pi.gz
[Tue Nov 29 22:56:23 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 22:56:23 2011] rmf not generated due to insufficient counts
[Wed Nov 30 00:29:31 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:31 2011] Error reading totcts from fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src115_src_b10.pi.gz
[Wed Nov 30 00:29:38 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:38 2011] Using photon index=1.80, rate=0.00523, arf fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src115.arf
[Wed Nov 30 00:29:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:38 2011] Updating source flux to 6.8e-14
[Wed Nov 30 00:40:04 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting