[Thu Nov 24 05:21:05 2011] Detection parameters:
  Position = (354.7, 470.9) = 14 45 7.05 -62 17 4.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 507.5 +/- 34.8
  Background counts = 123.4
  Rate = 0.007 +/- 0.0005

[Thu Nov 24 05:21:09 2011] Off-axis axis estimate = 13.15'
[Thu Nov 24 16:42:30 2011] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:42:30 2011] Initial guess for spatial extent in simple fitting = 13.01"
[Thu Nov 24 16:42:30 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.006
[Thu Nov 24 16:42:30 2011] Giving source the simple spatial ID 47 for pass 0, mean size = 13.01"
[Fri Nov 25 01:00:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src47.ximg exists
[Fri Nov 25 01:00:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src47_1.ximg exists
[Fri Nov 25 01:00:37 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src47 appears to have run properly
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Fri Nov 25 01:00:42 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Fri Nov 25 01:02:13 2011] Warning, spatial fit 47 centroid is now closest to src. 26
[Fri Nov 25 01:02:13 2011] Spatial fit model total counts = 4110.640000, observed total counts = 4109.000000
[Fri Nov 25 01:02:13 2011] Offset between fit and detection position for source 11 = 1.208851 pixels
[Fri Nov 25 01:02:13 2011] Warning, changing simple spatial fit ID from 47 to 51
[Fri Nov 25 01:02:13 2011] 3978.379000 total counts/ 3650.370000 bgd. counts: snr = 5.428968
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.208851 pixels
  Position = (354.0, 469.9) = 14 45 7.48 -62 17 9.4
  Extent = 13.2 (8.5-24.7)", rotation angle = 0
  Source counts = 328.0 +/- 63.1
  Background counts = 3650.4
  Rate = 0.004 +/- 0.0008
[Fri Nov 25 01:02:14 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:02:14 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 01:02:14 2011] Source does appear to be extended
[Fri Nov 25 01:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:02:14 2011] Source is confused with source 10
[Fri Nov 25 23:57:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:57:19 2011] Initial guess for spatial extent in simple fitting = 13.17"
[Fri Nov 25 23:57:19 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.984
[Fri Nov 25 23:57:19 2011] Giving source the simple spatial ID 48 for pass 1, mean size = 13.17"
[Sat Nov 26 11:49:32 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src48.ximg exists
[Sat Nov 26 11:49:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src48.csv
[Sat Nov 26 11:49:32 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src48_1.ximg exists
[Sat Nov 26 11:49:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src48.csv
[Sat Nov 26 11:49:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 11:49:36 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Sat Nov 26 11:49:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src48.csv
[Sat Nov 26 11:49:36 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Sat Nov 26 11:49:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src48.csv
[Sat Nov 26 11:49:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 11:51:34 2011] Warning, spatial fit 48 centroid is now closest to src. 26
[Sat Nov 26 11:51:34 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:34 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:34 2011] Source does appear to be extended
[Sat Nov 26 11:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:43:18 2011] XMMSAS src. selection expression = ellipse(30752.459400, 40835.362000, 790.278023, 790.278023, 0.000000, X, Y)
[Tue Nov 29 04:43:18 2011] Writing source region out to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src11_src.reg
[Tue Nov 29 04:43:18 2011] Extracting stamp from image fullrun_mos2_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (309, 425) - (399, 515)
[Tue Nov 29 04:43:18 2011] XMMSAS bgd. selection expression = annulus(30752.459400, 40835.362000, 1317.130038, 2634.260076, X, Y) && !ellipse(29728.505829, 37614.606598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31594.946000, 41184.194000, 2783.448080, 2783.448080, 0.000000, X, Y) && !ellipse(31842.316000, 41559.746000, 2960.288085, 2960.288085, 0.000000, X, Y) && !ellipse(29423.002000, 39178.822000, 1986.152057, 1986.152057, 0.000000, X, Y) && !ellipse(31244.881000, 39767.122400, 829.992024, 829.992024, 0.000000, X, Y) && !ellipse(32715.126000, 42490.428000, 12589.488362, 12589.488362, 0.000000, X, Y) && !ellipse(30289.370000, 39549.632000, 4262.304123, 4262.304123, 0.000000, X, Y) && !ellipse(31098.074000, 40712.596000, 1480.144043, 1480.144043, 340.352000, X, Y) && !ellipse(29996.580000, 38092.536000, 1848.888053, 1848.888053, 0.000000, X, Y) && !ellipse(30298.106000, 40222.136000, 1986.760057, 1986.760057, 0.000000, X, Y) && !ellipse(31299.572000, 39755.366000, 1490.792043, 1490.792043, 0.000000, X, Y) && !ellipse(32810.599243, 43267.697632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31289.325867, 38423.365692, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 04:43:18 2011] Writing fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src11.gif
[Tue Nov 29 07:30:59 2011] Mean detx,y = (-5767.70, 12413.68) 
[Tue Nov 29 07:31:01 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 07:31:29 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 07:31:29 2011] Setting source spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Nov 29 07:31:29 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed Nov 30 00:29:30 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:30 2011] Error reading totcts from fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Nov 30 00:29:38 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:38 2011] Using photon index=1.80, rate=0.00439, arf fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src11.arf
[Wed Nov 30 00:29:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:38 2011] Updating source flux to 1e-13
[Wed Nov 30 00:40:04 2011] Flag c found in src. 11 procflags, skipping spectral fitting