[Thu Nov 24 05:21:07 2011] Detection parameters:
  Position = (339.9, 272.1) = 14 45 16.08 -62 31 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 349.2 +/- 31.3
  Background counts = 172.0
  Rate = 0.005 +/- 0.0005

[Thu Nov 24 05:21:09 2011] Off-axis axis estimate = 3.56'
[Thu Nov 24 16:42:30 2011] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:42:30 2011] Initial guess for spatial extent in simple fitting = 8.21"
[Thu Nov 24 16:42:30 2011] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.702
[Thu Nov 24 16:42:30 2011] Giving source the simple spatial ID 59 for pass 0, mean size = 8.21"
[Fri Nov 25 01:00:38 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src59.ximg exists
[Fri Nov 25 01:00:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src59.csv
[Fri Nov 25 01:00:38 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src59_1.ximg exists
[Fri Nov 25 01:00:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src59.csv
[Fri Nov 25 01:00:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Fri Nov 25 01:00:42 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Fri Nov 25 01:02:13 2011] Spatial fit model total counts = 2930.990000, observed total counts = 2931.000000
[Fri Nov 25 01:02:13 2011] Offset between fit and detection position for source 105 = 4.705815 pixels
[Fri Nov 25 01:02:13 2011] 2762.227000 total counts/ 1814.600000 bgd. counts: snr = 22.245746
Spatial fit parameters:
  Offset between fit and detection position for source 105 = 4.705815 pixels
  Position = (342.2, 276.2) = 14 45 14.65 -62 31 12.2
  Extent = 16.4 (15.5-32.8)", rotation angle = 0
  Source counts = 947.6 +/- 52.6
  Background counts = 1814.6
  Rate = 0.01 +/- 0.0007
[Fri Nov 25 01:02:14 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:02:14 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 01:02:14 2011] Source does appear to be extended
[Fri Nov 25 01:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:02:14 2011] Source is confused with source 97
[Fri Nov 25 23:57:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:57:19 2011] Initial guess for spatial extent in simple fitting = 16.42"
[Fri Nov 25 23:57:19 2011] source mask rpix=3.8, npix_max = 73, mask sum = 64, frac = 0.876
[Fri Nov 25 23:57:19 2011] Giving source the simple spatial ID 60 for pass 1, mean size = 16.42"
[Sat Nov 26 11:49:32 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src60.ximg exists
[Sat Nov 26 11:49:32 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src60_1.ximg exists
[Sat Nov 26 11:49:32 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src60 appears to have run properly
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Sat Nov 26 11:49:37 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src60 appears to have run properly
[Sat Nov 26 11:51:34 2011] Spatial fit model total counts = 3028.030000, observed total counts = 3033.000000
[Sat Nov 26 11:51:34 2011] Offset between fit and detection position for source 105 = 3.142102 pixels
[Sat Nov 26 11:51:34 2011] Warning, changing simple spatial fit ID from 60 to 44
[Sat Nov 26 11:51:34 2011] 1809.579100 total counts/ 1737.940000 bgd. counts: snr = 1.718434
Spatial fit parameters:
  Offset between fit and detection position for source 105 = 3.142102 pixels
  Position = (341.5, 273.2) = 14 45 15.06 -62 31 25.5
  Extent = 8.6 (4.9-11.9)", rotation angle = 0
  Source counts = 71.6 +/- 42.5
  Background counts = 1737.9
  Rate = 0.001 +/- 0.0006
[Sat Nov 26 11:51:34 2011] Spatial fit model total counts = 5462.970000, observed total counts = 5460.000000
[Sat Nov 26 11:51:34 2011] Offset between fit and detection position for source 105 = 1.676459 pixels
[Sat Nov 26 11:51:34 2011] Warning, changing simple spatial fit ID from 44 to 60
[Sat Nov 26 11:51:34 2011] 5135.027000 total counts/ 4603.960000 bgd. counts: snr = 7.826788
Spatial fit parameters:
  Offset between fit and detection position for source 105 = 1.676459 pixels
  Position = (340.9, 274.7) = 14 45 15.45 -62 31 18.7
  Extent = 13.0 (10.3-21.9)", rotation angle = 0
  Source counts = 531.1 +/- 71.7
  Background counts = 4604.0
  Rate = 0.007 +/- 0.001
[Sat Nov 26 11:51:34 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:34 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:34 2011] Source does appear to be extended
[Sat Nov 26 11:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:43:21 2011] XMMSAS src. selection expression = ellipse(29611.905800, 23851.468400, 779.118022, 779.118022, 0.000000, X, Y)
[Tue Nov 29 04:43:21 2011] Writing source region out to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src105_src.reg
[Tue Nov 29 04:43:21 2011] Extracting stamp from image fullrun_mos2_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (296, 230) - (386, 319)
[Tue Nov 29 04:43:21 2011] XMMSAS bgd. selection expression = annulus(29611.905800, 23851.468400, 1298.530037, 2597.060075, X, Y) && !ellipse(26668.119540, 25833.732200, 1078.000031, 1078.000031, 0.000000, X, Y) && !ellipse(26964.620000, 27064.718000, 723.760821, 723.760821, 0.000000, X, Y) && !ellipse(26043.432600, 23564.740000, 2284.624066, 1643.816047, 31.797900, X, Y) && !ellipse(26613.252000, 25264.346000, 976.216028, 976.216028, 0.000000, X, Y) && !ellipse(25838.926400, 22815.724000, 1551.240045, 1551.240045, 0.000000, X, Y) && !ellipse(28763.042960, 25369.424400, 576.191217, 576.191217, 0.000000, X, Y) && !ellipse(25878.018384, 23165.672000, 1266.568036, 1266.568036, 0.000000, X, Y) && !ellipse(28214.960400, 20640.399000, 677.336019, 677.336019, 0.000000, X, Y) && !ellipse(27642.098000, 21478.286000, 999.408029, 999.408029, 0.000000, X, Y) && !ellipse(28338.770000, 19799.480000, 1515.544044, 1515.544044, 0.000000, X, Y) && !ellipse(30874.410000, 27682.044000, 1375.608040, 1375.608040, 0.000000, X, Y) && !ellipse(27450.823600, 20489.535320, 1117.864032, 1117.864032, 0.000000, X, Y) && !ellipse(27928.621643, 25118.926270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27216.598541, 24902.628998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28074.764800, 20182.610000, 2512.384072, 2512.384072, 0.000000, X, Y) && !ellipse(29178.244060, 22887.227600, 796.143223, 796.143223, 0.000000, X, Y) && !ellipse(27663.564000, 22092.876000, 1309.008038, 314.276009, 85.672660, X, Y) && !ellipse(27658.144000, 21856.566000, 1227.280035, 1227.280035, 0.000000, X, Y) && !ellipse(30224.778000, 28356.614000, 2731.992079, 2731.992079, 0.000000, X, Y) && !ellipse(28120.497955, 21591.195480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30981.388000, 27323.784000, 1392.904040, 1392.904040, 0.000000, X, Y) && !ellipse(27249.358948, 22242.265747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26984.665802, 24527.014038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29762.242000, 24268.984000, 1278.544037, 1278.544037, 0.000000, X, Y) && !ellipse(26380.834000, 20194.031000, 1404.248040, 1404.248040, 0.000000, X, Y) && !ellipse(27772.829834, 22894.582550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27083.286865, 24178.660919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27237.549377, 23364.838684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29235.334000, 22481.044000, 1345.368039, 1345.368039, 0.000000, X, Y) && !ellipse(28340.156494, 22478.072174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32764.855743, 23423.873260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30540.640000, 28088.712000, 2375.896068, 2375.896068, 0.000000, X, Y) && !ellipse(31940.336395, 26747.194672, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 04:43:21 2011] Writing fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src105.gif
[Tue Nov 29 08:06:24 2011] Mean detx,y = (-2137.71, -4187.64) 
[Tue Nov 29 08:06:27 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 08:06:54 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 08:06:54 2011] Setting source spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src105_src_b10.pi.gz
[Tue Nov 29 08:06:54 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src105_bgd.pi.gz
[Wed Nov 30 00:29:31 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:31 2011] Error reading totcts from fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src105_src_b10.pi.gz
[Wed Nov 30 00:29:38 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:38 2011] Using photon index=1.80, rate=0.0071, arf fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src105.arf
[Wed Nov 30 00:29:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:38 2011] Updating source flux to 7.1e-14
[Wed Nov 30 00:40:04 2011] Flag c found in src. 105 procflags, skipping spectral fitting