[Thu Nov 24 05:20:00 2011] Detection parameters:
  Position = (281.4, 239.2) = 14 45 52.84 -62 33 55.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.6 +/- 14.5
  Background counts = 70.3
  Rate = 0.002 +/- 0.0003

[Thu Nov 24 05:20:01 2011] Off-axis axis estimate = 4.47'
[Thu Nov 24 10:53:33 2011] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 10:53:33 2011] Initial guess for spatial extent in simple fitting = 8.66"
[Thu Nov 24 10:53:33 2011] source mask rpix=2.0, npix_max = 24, mask sum = 21, frac = 0.846
[Thu Nov 24 10:53:33 2011] Giving source the simple spatial ID 94 for pass 0, mean size = 8.66"
[Thu Nov 24 16:42:27 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src94.ximg exists
[Thu Nov 24 16:42:27 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src94_1.ximg exists
[Thu Nov 24 16:42:27 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src94 appears to have run properly
[Thu Nov 24 16:42:30 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src94.ximg exists
[Thu Nov 24 16:42:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src94.csv
[Thu Nov 24 16:42:30 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src94_1.ximg exists
[Thu Nov 24 16:42:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src94.csv
[Thu Nov 24 16:42:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src94_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 01:01:52 2011] Spatial fit model total counts = 515.910000, observed total counts = 568.000000
[Fri Nov 25 01:01:52 2011] Offset between fit and detection position for source 98 = 0.311578 pixels
[Fri Nov 25 01:01:52 2011] 559.895000 total counts/ 398.789000 bgd. counts: snr = 8.067521
Spatial fit parameters:
  Offset between fit and detection position for source 98 = 0.311578 pixels
  Position = (281.6, 238.9) = 14 45 52.75 -62 33 54.7
  Extent = 17.3 (15.5-34.7)" x 4.6 (3.6-5.4)", rotation angle = 344 (340-350) degrees
  Source counts = 161.1 +/- 23.7
  Background counts = 398.8
  Rate = 0.002 +/- 0.0003
[Fri Nov 25 01:01:52 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:52 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 01:01:52 2011] Source does appear to be extended
[Fri Nov 25 01:01:52 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.84
[Fri Nov 25 01:01:52 2011] Source is asymmetric
[Fri Nov 25 15:11:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 15:11:47 2011] Initial guess for spatial extent in simple fitting = 10.96"
[Fri Nov 25 15:11:47 2011] source mask rpix=2.5, npix_max = 36, mask sum = 25, frac = 0.686
[Fri Nov 25 15:11:47 2011] Giving source the simple spatial ID 87 for pass 1, mean size = 10.96"
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src87.ximg exists
[Fri Nov 25 23:57:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src87.csv
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src87_1.ximg exists
[Fri Nov 25 23:57:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src87.csv
[Fri Nov 25 23:57:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 23:57:18 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src87.ximg exists
[Fri Nov 25 23:57:18 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src87_1.ximg exists
[Fri Nov 25 23:57:18 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src87 appears to have run properly
[Sat Nov 26 11:50:59 2011] Warning, spatial fit 87 centroid is now closest to src. 45
[Sat Nov 26 11:51:00 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:00 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:00 2011] Source does appear to be extended
[Sat Nov 26 11:51:00 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.84
[Sat Nov 26 11:51:00 2011] Source is asymmetric
[Mon Nov 28 12:13:48 2011] XMMSAS src. selection expression = ellipse(24449.875200, 20735.472400, 1039.602030, 275.139608, 343.858011, X, Y)
[Mon Nov 28 12:13:48 2011] Writing source region out to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src98_src.reg
[Mon Nov 28 12:13:48 2011] Extracting stamp from image fullrun_mos1_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (222, 179) - (341, 299)
[Mon Nov 28 12:13:48 2011] XMMSAS bgd. selection expression = annulus(24449.875200, 20735.472400, 1732.670050, 3465.340100, X, Y) && !ellipse(26018.658900, 23534.669800, 1918.904055, 859.680025, 108.012200, X, Y) && !ellipse(25916.975000, 22648.059520, 1251.512036, 901.048026, 269.647000, X, Y) && !ellipse(26482.841000, 25043.682600, 2187.712063, 841.816024, 111.678000, X, Y) && !ellipse(27660.243600, 21342.538000, 941.016027, 941.016027, 0.000000, X, Y) && !ellipse(25912.132202, 21422.036926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27554.346000, 22075.898000, 1282.776037, 1282.776037, 0.000000, X, Y) && !ellipse(22908.837800, 22875.163000, 354.168810, 354.168810, 0.000000, X, Y) && !ellipse(27179.983032, 24914.717346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28239.902588, 22249.105103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28622.465759, 21845.664108, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 12:13:48 2011] Writing fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src98.gif
[Mon Nov 28 18:42:40 2011] Mean detx,y = (-6232.01, -3669.31) 
[Mon Nov 28 18:42:44 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 18:43:25 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 18:43:25 2011] Setting source spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Mon Nov 28 18:43:25 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src98_bgd.pi.gz
[Wed Nov 30 00:29:23 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:23 2011] Error reading totcts from fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Wed Nov 30 00:29:27 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:27 2011] Using photon index=1.80, rate=0.00215, arf fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src98.arf
[Wed Nov 30 00:29:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:27 2011] Updating source flux to 4.4e-14