[Thu Nov 24 05:20:00 2011] Detection parameters:
  Position = (354.1, 490.1) = 14 45 7.45 -62 15 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.4 +/- 18.3
  Background counts = 76.1
  Rate = 0.001 +/- 0.0002

[Thu Nov 24 05:20:01 2011] Off-axis axis estimate = 14.47'
[Thu Nov 24 10:53:33 2011] Using EEF radius (= 13.66 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 10:53:33 2011] Initial guess for spatial extent in simple fitting = 13.66"
[Thu Nov 24 10:53:33 2011] source mask rpix=3.1, npix_max = 53, mask sum = 63, frac = 1.188
[Thu Nov 24 10:53:33 2011] Giving source the simple spatial ID 113 for pass 0, mean size = 13.66"
[Fri Nov 25 01:01:52 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:52 2011] Assessing source extent using major
[Fri Nov 25 01:01:52 2011] Source does appear to be extended
[Fri Nov 25 01:01:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 15:11:47 2011] Using EEF radius (= 13.66 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 15:11:47 2011] Initial guess for spatial extent in simple fitting = 13.66"
[Fri Nov 25 15:11:47 2011] source mask rpix=3.1, npix_max = 53, mask sum = 63, frac = 1.188
[Fri Nov 25 15:11:47 2011] Giving source the simple spatial ID 97 for pass 1, mean size = 13.66"
[Fri Nov 25 23:57:16 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src97.ximg exists
[Fri Nov 25 23:57:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src97.csv
[Fri Nov 25 23:57:16 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src97_1.ximg exists
[Fri Nov 25 23:57:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src97.csv
[Fri Nov 25 23:57:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src97_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 23:57:19 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src97.ximg exists
[Fri Nov 25 23:57:19 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src97_1.ximg exists
[Fri Nov 25 23:57:19 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src97 appears to have run properly
[Sat Nov 26 11:51:00 2011] Warning: source 97 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 90 at 17.643043 pixels away
[Sat Nov 26 11:51:00 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:00 2011] Assessing source extent using major
[Sat Nov 26 11:51:00 2011] Source does appear to be extended
[Sat Nov 26 11:51:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 12:13:48 2011] XMMSAS src. selection expression = ellipse(30760.430756, 42587.800385, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 12:13:48 2011] Writing source region out to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src90_src.reg
[Mon Nov 28 12:13:48 2011] Extracting stamp from image fullrun_mos1_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (317, 453) - (392, 528)
[Mon Nov 28 12:13:48 2011] XMMSAS bgd. selection expression = annulus(30760.430756, 42587.800385, 1087.500000, 2175.000000, X, Y) && !ellipse(29485.330000, 39250.838000, 1993.752057, 1993.752057, 0.000000, X, Y) && !ellipse(29813.241089, 39622.209656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31035.560000, 39842.320000, 1974.536057, 1974.536057, 0.000000, X, Y) && !ellipse(31114.834686, 41179.243622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30471.452000, 40739.564000, 2018.168058, 2018.168058, 0.000000, X, Y) && !ellipse(30569.994000, 40164.564000, 1893.008054, 1893.008054, 0.000000, X, Y)
[Mon Nov 28 12:13:48 2011] Writing fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src90.gif
[Mon Nov 28 18:47:33 2011] Mean detx,y = (14367.33, 5801.20) 
[Mon Nov 28 18:47:35 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 18:47:56 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 18:47:56 2011] Setting source spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src90_src_b10.pi.gz
[Mon Nov 28 18:47:56 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src90_bgd.pi.gz
[Tue Nov 29 04:43:03 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 04:43:03 2011] rmf not generated due to insufficient counts
[Wed Nov 30 00:29:23 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:23 2011] Error reading totcts from fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src90_src_b10.pi.gz
[Wed Nov 30 00:29:27 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:27 2011] Using photon index=1.80, rate=0.00139, arf fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src90.arf
[Wed Nov 30 00:29:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:27 2011] Updating source flux to 3.3e-14
[Wed Nov 30 00:29:47 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting