[Thu Nov 24 05:20:00 2011] Detection parameters:
  Position = (347.9, 327.0) = 14 45 11.14 -62 27 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 254.4 +/- 30.8
  Background counts = 252.8
  Rate = 0.004 +/- 0.0004

[Thu Nov 24 05:20:01 2011] Off-axis axis estimate = 4.14'
[Thu Nov 24 10:53:33 2011] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 10:53:33 2011] Initial guess for spatial extent in simple fitting = 8.50"
[Thu Nov 24 10:53:33 2011] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.830
[Thu Nov 24 10:53:33 2011] Giving source the simple spatial ID 74 for pass 0, mean size = 8.50"
[Thu Nov 24 16:42:27 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src74.ximg exists
[Thu Nov 24 16:42:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src74.csv
[Thu Nov 24 16:42:27 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src74_1.ximg exists
[Thu Nov 24 16:42:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src74.csv
[Thu Nov 24 16:42:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 16:42:29 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Thu Nov 24 16:42:29 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Thu Nov 24 16:42:29 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src74 appears to have run properly
[Fri Nov 25 01:01:52 2011] Spatial fit model total counts = 4054.670000, observed total counts = 4044.000000
[Fri Nov 25 01:01:52 2011] Offset between fit and detection position for source 81 = 5.264727 pixels
[Fri Nov 25 01:01:52 2011] 4044.534000 total counts/ 3378.920000 bgd. counts: snr = 11.450738
Spatial fit parameters:
  Offset between fit and detection position for source 81 = 5.264727 pixels
  Position = (346.4, 332.1) = 14 45 12.09 -62 27 9.2
  Extent = 17.0 (16.9-17.0)", rotation angle = 0
  Source counts = 665.6 +/- 63.6
  Background counts = 3378.9
  Rate = 0.009 +/- 0.0009
[Fri Nov 25 01:01:52 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:52 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 01:01:52 2011] Source does appear to be extended
[Fri Nov 25 01:01:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:01:52 2011] Source is confused with source 39
[Fri Nov 25 15:11:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 15:11:47 2011] Initial guess for spatial extent in simple fitting = 16.98"
[Fri Nov 25 15:11:47 2011] source mask rpix=3.9, npix_max = 77, mask sum = 72, frac = 0.928
[Fri Nov 25 15:11:47 2011] Giving source the simple spatial ID 70 for pass 1, mean size = 16.98"
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src70.ximg exists
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src70_1.ximg exists
[Fri Nov 25 23:57:15 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src70 appears to have run properly
[Fri Nov 25 23:57:18 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Fri Nov 25 23:57:18 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Fri Nov 25 23:57:18 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src70 appears to have run properly
[Sat Nov 26 11:50:58 2011] Spatial fit model total counts = 7414.610000, observed total counts = 7411.000000
[Sat Nov 26 11:50:58 2011] Offset between fit and detection position for source 81 = 4.635482 pixels
[Sat Nov 26 11:50:58 2011] Warning, changing simple spatial fit ID from 70 to 55
[Sat Nov 26 11:50:58 2011] 6176.210000 total counts/ 5089.670000 bgd. counts: snr = 15.230035
Spatial fit parameters:
  Offset between fit and detection position for source 81 = 4.635482 pixels
  Position = (348.3, 327.8) = 14 45 10.91 -62 27 27.6
  Extent = 20.6 (17.4-24.2)", rotation angle = 0
  Source counts = 1086.5 +/- 78.6
  Background counts = 5089.7
  Rate = 0.01 +/- 0.001
[Sat Nov 26 11:50:59 2011] Spatial fit model total counts = 9836.980000, observed total counts = 9853.000000
[Sat Nov 26 11:50:59 2011] Offset between fit and detection position for source 81 = 2.780775 pixels
[Sat Nov 26 11:50:59 2011] Warning, changing simple spatial fit ID from 55 to 65
[Sat Nov 26 11:50:59 2011] 8879.760000 total counts/ 7450.820000 bgd. counts: snr = 16.554343
Spatial fit parameters:
  Offset between fit and detection position for source 81 = 2.780775 pixels
  Position = (350.1, 325.8) = 14 45 9.74 -62 27 36.6
  Extent = 20.9 (18.0-24.0)", rotation angle = 0
  Source counts = 1428.9 +/- 94.2
  Background counts = 7450.8
  Rate = 0.02 +/- 0.001
[Sat Nov 26 11:51:00 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:00 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:00 2011] Source does appear to be extended
[Sat Nov 26 11:51:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 12:13:47 2011] Counts = 1428.940000, rescaling region sizes by 2.000000
[Mon Nov 28 12:13:47 2011] XMMSAS src. selection expression = ellipse(30411.168000, 28292.836000, 2505.096072, 2505.096072, 0.000000, X, Y)
[Mon Nov 28 12:13:47 2011] Writing source region out to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src81_src.reg
[Mon Nov 28 12:13:47 2011] Extracting stamp from image fullrun_mos1_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (206, 182) - (494, 470)
[Mon Nov 28 12:13:47 2011] XMMSAS bgd. selection expression = annulus(30411.168000, 28292.836000, 8350.320240, 16700.640481, X, Y) && !ellipse(26653.601020, 25843.457000, 1078.544031, 1078.544031, 0.000000, X, Y) && !ellipse(27817.888000, 28935.027600, 1260.344036, 922.752027, 123.079700, X, Y) && !ellipse(26911.278130, 26968.622053, 1918.904055, 749.307212, 112.443825, X, Y) && !ellipse(28393.996000, 31156.598000, 1372.104039, 1372.104039, 0.000000, X, Y) && !ellipse(26935.910000, 27045.420000, 2229.384064, 2229.384064, 0.000000, X, Y) && !ellipse(26018.658900, 23534.669800, 1918.904055, 859.680025, 108.012200, X, Y) && !ellipse(26705.344000, 25575.540000, 966.504028, 434.852013, 90.000000, X, Y) && !ellipse(25916.975000, 22648.059520, 1251.512036, 901.048026, 269.647000, X, Y) && !ellipse(27795.072000, 30072.842000, 1372.104039, 1372.104039, 0.000000, X, Y) && !ellipse(26482.841000, 25043.682600, 2187.712063, 841.816024, 111.678000, X, Y) && !ellipse(28200.823212, 30534.039062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28040.151459, 29452.109314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28783.717400, 25385.089600, 664.022419, 664.022419, 0.000000, X, Y) && !ellipse(28958.979200, 33467.806000, 1761.520051, 1761.520051, 0.000000, X, Y) && !ellipse(30247.599600, 32247.072000, 1557.144045, 1557.144045, 0.000000, X, Y) && !ellipse(29485.330000, 39250.838000, 1993.752057, 1993.752057, 0.000000, X, Y) && !ellipse(28367.060000, 31783.916000, 1496.424043, 1496.424043, 0.000000, X, Y) && !ellipse(27660.243600, 21342.538000, 941.016027, 941.016027, 0.000000, X, Y) && !ellipse(29024.755400, 33009.812000, 1520.696044, 1520.696044, 0.000000, X, Y) && !ellipse(29282.090000, 34152.476800, 1258.896036, 592.713617, -0.000000, X, Y) && !ellipse(30238.942400, 31509.708400, 1131.344033, 1131.344033, 0.000000, X, Y) && !ellipse(30142.012000, 31671.966000, 1587.832046, 1587.832046, 0.000000, X, Y) && !ellipse(29984.421448, 37972.002747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30504.082360, 29558.738000, 981.344028, 981.344028, 0.000000, X, Y) && !ellipse(26418.478149, 28662.134552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29565.900400, 35792.028000, 904.464026, 904.464026, 0.000000, X, Y) && !ellipse(27283.950580, 30925.575400, 1358.488039, 1358.488039, 0.000000, X, Y) && !ellipse(29050.956000, 34663.310000, 1675.912048, 1110.192032, 269.780000, X, Y) && !ellipse(26416.370000, 29728.690000, 1308.280038, 1308.280038, 0.000000, X, Y) && !ellipse(29558.586609, 37021.847412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30119.373932, 39188.959320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25773.562260, 27766.212000, 506.828815, 506.828815, 0.000000, X, Y) && !ellipse(25912.132202, 21422.036926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30983.436000, 30456.480000, 1506.488043, 1506.488043, 0.000000, X, Y) && !ellipse(27554.346000, 22075.898000, 1282.776037, 1282.776037, 0.000000, X, Y) && !ellipse(30583.358200, 27941.724000, 1367.560039, 1367.560039, 0.000000, X, Y) && !ellipse(30316.086195, 30337.009514, 1442.496042, 766.040689, 71.186769, X, Y) && !ellipse(29647.802000, 36416.280000, 1661.984048, 519.559215, 83.760672, X, Y) && !ellipse(27892.794000, 25077.520600, 835.144024, 835.144024, 0.000000, X, Y) && !ellipse(29813.241089, 39622.209656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29972.918000, 35202.716000, 2863.344082, 1277.208037, -0.000000, X, Y) && !ellipse(29248.876400, 22948.429800, 982.056028, 982.056028, 0.000000, X, Y) && !ellipse(37839.900482, 33633.831400, 511.068015, 210.988806, 243.373000, X, Y) && !ellipse(25079.173600, 25498.798000, 789.829623, 789.829623, 0.000000, X, Y) && !ellipse(31035.560000, 39842.320000, 1974.536057, 1974.536057, 0.000000, X, Y) && !ellipse(27226.308600, 32087.822600, 389.080811, 389.080811, 0.000000, X, Y) && !ellipse(31387.538000, 29605.725940, 1127.768032, 1127.768032, 0.000000, X, Y) && !ellipse(31114.834686, 41179.243622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29038.951000, 33739.186000, 1313.056038, 1313.056038, 0.000000, X, Y) && !ellipse(22908.837800, 22875.163000, 354.168810, 354.168810, 0.000000, X, Y) && !ellipse(27179.983032, 24914.717346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29791.080000, 24143.280000, 1282.008037, 1282.008037, 0.000000, X, Y) && !ellipse(22871.890800, 27028.780000, 355.445610, 355.445610, 0.000000, X, Y) && !ellipse(30791.157400, 27621.982000, 1378.280040, 1378.280040, 0.000000, X, Y) && !ellipse(30471.452000, 40739.564000, 2018.168058, 2018.168058, 0.000000, X, Y) && !ellipse(30299.384400, 30264.968000, 687.696820, 687.696820, 0.000000, X, Y) && !ellipse(30569.994000, 40164.564000, 1893.008054, 1893.008054, 0.000000, X, Y) && !ellipse(18197.621994, 32054.908875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29201.227631, 35899.792206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31978.003140, 28853.801200, 356.974410, 356.974410, 0.000000, X, Y) && !ellipse(30843.034027, 39276.471741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35198.067963, 23867.183502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29709.332000, 30083.570000, 1406.016040, 1406.016040, 0.000000, X, Y) && !ellipse(30867.062000, 27315.132000, 1983.720057, 1983.720057, 0.000000, X, Y) && !ellipse(34016.882599, 37018.995911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28239.902588, 22249.105103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35898.314280, 34922.466400, 756.636822, 756.636822, 0.000000, X, Y) && !ellipse(41283.652720, 36103.823000, 1316.128038, 1316.128038, 0.000000, X, Y) && !ellipse(19459.966200, 20789.301800, 530.884815, 530.884815, 0.000000, X, Y) && !ellipse(22747.584198, 26591.477203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28843.411987, 30336.122559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35235.363800, 21038.906000, 3415.008098, 1284.448037, 86.454630, X, Y) && !ellipse(16042.428513, 23271.769287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28622.465759, 21845.664108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36067.584000, 34875.856000, 1967.512057, 1967.512057, 0.000000, X, Y) && !ellipse(28116.340179, 25506.111847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18113.234543, 28375.566620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25151.678711, 35960.398560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34806.985055, 26416.280438, 1625.952047, 439.023405, 80.158338, X, Y) && !ellipse(29503.600952, 24659.619476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35504.609680, 24296.730072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35264.276428, 21876.463776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26517.513397, 38276.970032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24449.875200, 20735.472400, 1386.136040, 366.852811, 343.858011, X, Y) && !ellipse(27771.964294, 33779.111450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39012.813033, 37683.703434, 803.715555, 311.931288, 64.804307, X, Y) && !ellipse(32548.762000, 23676.146000, 1518.648044, 670.410419, 45.808000, X, Y) && !ellipse(16955.663010, 26737.915344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40863.178314, 35468.195953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30760.430756, 42587.800385, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 12:13:47 2011] Writing fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src81.gif
[Mon Nov 28 18:03:34 2011] Mean detx,y = (523.33, 3353.33) 
[Mon Nov 28 18:03:40 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 18:17:20 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 18:17:21 2011] Setting source spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Mon Nov 28 18:17:21 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src81_bgd.pi.gz
[Wed Nov 30 00:29:22 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:22 2011] Error reading totcts from fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Wed Nov 30 00:29:26 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:26 2011] Using photon index=1.80, rate=0.0191, arf fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src81.arf
[Wed Nov 30 00:29:26 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:26 2011] Updating source flux to 1.7e-13
[Wed Nov 30 00:29:47 2011] Flag c found in src. 81 procflags, skipping spectral fitting