[Thu Nov 24 05:20:00 2011] Detection parameters:
  Position = (418.8, 406.7) = 14 44 26.88 -62 21 43.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.8 +/- 18.9
  Background counts = 75.8
  Rate = 0.003 +/- 0.0005

[Thu Nov 24 05:20:01 2011] Off-axis axis estimate = 11.74'
[Thu Nov 24 10:53:33 2011] Using EEF radius (= 12.30 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 10:53:33 2011] Initial guess for spatial extent in simple fitting = 12.30"
[Thu Nov 24 10:53:33 2011] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.107
[Thu Nov 24 10:53:33 2011] Giving source the simple spatial ID 81 for pass 0, mean size = 12.30"
[Thu Nov 24 16:42:27 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src81.ximg exists
[Thu Nov 24 16:42:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src81.csv
[Thu Nov 24 16:42:27 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src81_1.ximg exists
[Thu Nov 24 16:42:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src81.csv
[Thu Nov 24 16:42:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 16:42:29 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Thu Nov 24 16:42:29 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Thu Nov 24 16:42:29 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly
[Fri Nov 25 01:01:52 2011] Warning: source 81 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 77 at 12.857381 pixels away
[Fri Nov 25 01:01:52 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:52 2011] Assessing source extent using major
[Fri Nov 25 01:01:52 2011] Source does appear to be extended
[Fri Nov 25 01:01:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:01:52 2011] Source is confused with source 79
[Fri Nov 25 15:11:47 2011] Using EEF radius (= 12.30 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 15:11:47 2011] Initial guess for spatial extent in simple fitting = 12.30"
[Fri Nov 25 15:11:47 2011] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.107
[Fri Nov 25 15:11:47 2011] Giving source the simple spatial ID 77 for pass 1, mean size = 12.30"
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src77.ximg exists
[Fri Nov 25 23:57:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src77.csv
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src77_1.ximg exists
[Fri Nov 25 23:57:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src77.csv
[Fri Nov 25 23:57:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 23:57:18 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Fri Nov 25 23:57:18 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Fri Nov 25 23:57:18 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly
[Sat Nov 26 11:50:59 2011] Spatial fit model total counts = 1461.490000, observed total counts = 1460.000000
[Sat Nov 26 11:50:59 2011] Offset between fit and detection position for source 77 = 6.410747 pixels
[Sat Nov 26 11:50:59 2011] 1465.297000 total counts/ 1141.990000 bgd. counts: snr = 9.567180
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 6.410747 pixels
  Position = (415.1, 401.4) = 14 44 29.18 -62 22 6.5
  Extent = 24.6 (24.6-49.2)", rotation angle = 0
  Source counts = 323.3 +/- 38.3
  Background counts = 1142.0
  Rate = 0.004 +/- 0.0005
[Sat Nov 26 11:51:00 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:00 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:00 2011] Source does appear to be extended
[Sat Nov 26 11:51:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 12:13:47 2011] XMMSAS src. selection expression = ellipse(36067.584000, 34875.856000, 1475.634042, 1475.634042, 0.000000, X, Y)
[Mon Nov 28 12:13:47 2011] Writing source region out to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src77_src.reg
[Mon Nov 28 12:13:47 2011] Extracting stamp from image fullrun_mos1_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (330, 317) - (500, 486)
[Mon Nov 28 12:13:47 2011] XMMSAS bgd. selection expression = annulus(36067.584000, 34875.856000, 2459.390071, 4918.780142, X, Y) && !ellipse(30247.599600, 32247.072000, 1557.144045, 1557.144045, 0.000000, X, Y) && !ellipse(29485.330000, 39250.838000, 1993.752057, 1993.752057, 0.000000, X, Y) && !ellipse(30238.942400, 31509.708400, 1131.344033, 1131.344033, 0.000000, X, Y) && !ellipse(30142.012000, 31671.966000, 1587.832046, 1587.832046, 0.000000, X, Y) && !ellipse(30504.082360, 29558.738000, 981.344028, 981.344028, 0.000000, X, Y) && !ellipse(30983.436000, 30456.480000, 1506.488043, 1506.488043, 0.000000, X, Y) && !ellipse(30316.086195, 30337.009514, 1442.496042, 766.040689, 71.186769, X, Y) && !ellipse(29647.802000, 36416.280000, 1661.984048, 519.559215, 83.760672, X, Y) && !ellipse(29972.918000, 35202.716000, 2863.344082, 1277.208037, -0.000000, X, Y) && !ellipse(37839.900482, 33633.831400, 511.068015, 210.988806, 243.373000, X, Y) && !ellipse(31035.560000, 39842.320000, 1974.536057, 1974.536057, 0.000000, X, Y) && !ellipse(31387.538000, 29605.725940, 1127.768032, 1127.768032, 0.000000, X, Y) && !ellipse(30471.452000, 40739.564000, 2018.168058, 2018.168058, 0.000000, X, Y) && !ellipse(30569.994000, 40164.564000, 1893.008054, 1893.008054, 0.000000, X, Y) && !ellipse(30843.034027, 39276.471741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34016.882599, 37018.995911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35898.314280, 34922.466400, 756.636822, 756.636822, 0.000000, X, Y) && !ellipse(41283.652720, 36103.823000, 1316.128038, 1316.128038, 0.000000, X, Y) && !ellipse(30411.168000, 28292.836000, 1670.064048, 1670.064048, 0.000000, X, Y) && !ellipse(39012.813033, 37683.703434, 803.715555, 311.931288, 64.804307, X, Y) && !ellipse(40863.178314, 35468.195953, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 12:13:47 2011] Writing fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src77.gif
[Mon Nov 28 18:34:56 2011] Mean detx,y = (6002.95, 9976.53) 
[Mon Nov 28 18:34:59 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 18:35:45 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 18:35:45 2011] Setting source spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Mon Nov 28 18:35:45 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Wed Nov 30 00:29:22 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:22 2011] Error reading totcts from fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Wed Nov 30 00:29:26 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:26 2011] Using photon index=1.80, rate=0.00432, arf fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src77.arf
[Wed Nov 30 00:29:26 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:26 2011] Updating source flux to 6.1e-14
[Wed Nov 30 00:29:47 2011] Flag c found in src. 77 procflags, skipping spectral fitting