[Thu Nov 24 05:19:59 2011] Detection parameters:
  Position = (340.9, 274.3) = 14 45 15.48 -62 31 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 337.7 +/- 29.0
  Background counts = 164.4
  Rate = 0.006 +/- 0.0005

[Thu Nov 24 05:20:01 2011] Off-axis axis estimate = 3.54'
[Thu Nov 24 10:53:33 2011] Using EEF radius (= 8.20 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 10:53:33 2011] Initial guess for spatial extent in simple fitting = 8.20"
[Thu Nov 24 10:53:33 2011] source mask rpix=1.9, npix_max = 22, mask sum = 21, frac = 0.923
[Thu Nov 24 10:53:33 2011] Giving source the simple spatial ID 55 for pass 0, mean size = 8.20"
[Thu Nov 24 16:42:26 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src55.ximg exists
[Thu Nov 24 16:42:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src55.csv
[Thu Nov 24 16:42:26 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src55_1.ximg exists
[Thu Nov 24 16:42:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src55.csv
[Thu Nov 24 16:42:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 16:42:29 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Thu Nov 24 16:42:29 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Thu Nov 24 16:42:29 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Fri Nov 25 01:01:51 2011] Spatial fit model total counts = 2621.980000, observed total counts = 2622.000000
[Fri Nov 25 01:01:51 2011] Offset between fit and detection position for source 69 = 4.176489 pixels
[Fri Nov 25 01:01:51 2011] 2438.432000 total counts/ 1736.310000 bgd. counts: snr = 16.849963
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 4.176489 pixels
  Position = (342.3, 278.2) = 14 45 14.60 -62 31 3.4
  Extent = 16.3 (16.2-16.4)", rotation angle = 0
  Source counts = 702.1 +/- 49.4
  Background counts = 1736.3
  Rate = 0.009 +/- 0.0007
[Fri Nov 25 01:01:52 2011] Spatial fit model total counts = 3190.180000, observed total counts = 3186.000000
[Fri Nov 25 01:01:52 2011] Offset between fit and detection position for source 69 = 0.727429 pixels
[Fri Nov 25 01:01:52 2011] Warning, changing simple spatial fit ID from 55 to 87
[Fri Nov 25 01:01:52 2011] 3221.145000 total counts/ 2518.720000 bgd. counts: snr = 13.996196
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 0.727429 pixels
  Position = (343.0, 278.1) = 14 45 14.15 -62 31 4.1
  Extent = 16.0 (16.0-32.1)", rotation angle = 0
  Source counts = 702.4 +/- 56.8
  Background counts = 2518.7
  Rate = 0.009 +/- 0.0008
[Fri Nov 25 01:01:52 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:52 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 01:01:52 2011] Source does appear to be extended
[Fri Nov 25 01:01:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:01:52 2011] Source is confused with source 107
[Fri Nov 25 15:11:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 15:11:47 2011] Initial guess for spatial extent in simple fitting = 16.03"
[Fri Nov 25 15:11:47 2011] source mask rpix=3.7, npix_max = 70, mask sum = 59, frac = 0.843
[Fri Nov 25 15:11:47 2011] Giving source the simple spatial ID 53 for pass 1, mean size = 16.03"
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src53.ximg exists
[Fri Nov 25 23:57:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src53.csv
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src53_1.ximg exists
[Fri Nov 25 23:57:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src53.csv
[Fri Nov 25 23:57:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 23:57:17 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Fri Nov 25 23:57:18 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Fri Nov 25 23:57:18 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Sat Nov 26 11:50:58 2011] Warning, spatial fit 53 centroid is now closest to src. 85
[Sat Nov 26 11:50:59 2011] Spatial fit model total counts = 3190.960000, observed total counts = 3186.000000
[Sat Nov 26 11:50:59 2011] Offset between fit and detection position for source 69 = 0.019729 pixels
[Sat Nov 26 11:50:59 2011] Warning, changing simple spatial fit ID from 53 to 83
[Sat Nov 26 11:50:59 2011] 3221.591000 total counts/ 2526.720000 bgd. counts: snr = 13.823742
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 0.019729 pixels
  Position = (343.0, 278.1) = 14 45 14.16 -62 31 4.1
  Extent = 16.0 (16.0-32.1)", rotation angle = 0
  Source counts = 694.9 +/- 56.8
  Background counts = 2526.7
  Rate = 0.009 +/- 0.0008
[Sat Nov 26 11:51:00 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:00 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:00 2011] Source does appear to be extended
[Sat Nov 26 11:51:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 12:13:46 2011] XMMSAS src. selection expression = ellipse(29791.080000, 24143.280000, 961.506028, 961.506028, 0.000000, X, Y)
[Mon Nov 28 12:13:46 2011] Writing source region out to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src69_src.reg
[Mon Nov 28 12:13:46 2011] Extracting stamp from image fullrun_mos1_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (288, 223) - (398, 333)
[Mon Nov 28 12:13:46 2011] XMMSAS bgd. selection expression = annulus(29791.080000, 24143.280000, 1602.510046, 3205.020092, X, Y) && !ellipse(26653.601020, 25843.457000, 1078.544031, 1078.544031, 0.000000, X, Y) && !ellipse(26911.278130, 26968.622053, 1918.904055, 749.307212, 112.443825, X, Y) && !ellipse(26935.910000, 27045.420000, 2229.384064, 2229.384064, 0.000000, X, Y) && !ellipse(26018.658900, 23534.669800, 1918.904055, 859.680025, 108.012200, X, Y) && !ellipse(26705.344000, 25575.540000, 966.504028, 434.852013, 90.000000, X, Y) && !ellipse(25916.975000, 22648.059520, 1251.512036, 901.048026, 269.647000, X, Y) && !ellipse(26482.841000, 25043.682600, 2187.712063, 841.816024, 111.678000, X, Y) && !ellipse(28783.717400, 25385.089600, 664.022419, 664.022419, 0.000000, X, Y) && !ellipse(27660.243600, 21342.538000, 941.016027, 941.016027, 0.000000, X, Y) && !ellipse(25912.132202, 21422.036926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27554.346000, 22075.898000, 1282.776037, 1282.776037, 0.000000, X, Y) && !ellipse(30583.358200, 27941.724000, 1367.560039, 1367.560039, 0.000000, X, Y) && !ellipse(27892.794000, 25077.520600, 835.144024, 835.144024, 0.000000, X, Y) && !ellipse(29248.876400, 22948.429800, 982.056028, 982.056028, 0.000000, X, Y) && !ellipse(27179.983032, 24914.717346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30791.157400, 27621.982000, 1378.280040, 1378.280040, 0.000000, X, Y) && !ellipse(30867.062000, 27315.132000, 1983.720057, 1983.720057, 0.000000, X, Y) && !ellipse(28239.902588, 22249.105103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30411.168000, 28292.836000, 1670.064048, 1670.064048, 0.000000, X, Y) && !ellipse(35235.363800, 21038.906000, 3415.008098, 1284.448037, 86.454630, X, Y) && !ellipse(28622.465759, 21845.664108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28116.340179, 25506.111847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29503.600952, 24659.619476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32548.762000, 23676.146000, 1518.648044, 670.410419, 45.808000, X, Y)
[Mon Nov 28 12:13:46 2011] Writing fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src69.gif
[Mon Nov 28 17:11:43 2011] Mean detx,y = (-3686.03, 2139.62) 
[Mon Nov 28 17:11:45 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 17:12:20 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 17:12:20 2011] Setting source spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Mon Nov 28 17:12:20 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Wed Nov 30 00:29:20 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:20 2011] Error reading totcts from fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Wed Nov 30 00:29:25 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:25 2011] Using photon index=1.80, rate=0.00929, arf fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src69.arf
[Wed Nov 30 00:29:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:25 2011] Updating source flux to 9.4e-14
[Wed Nov 30 00:29:47 2011] Flag c found in src. 69 procflags, skipping spectral fitting