[Thu Nov 24 05:19:59 2011] Detection parameters:
  Position = (368.2, 332.3) = 14 44 58.41 -62 27 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 326.9 +/- 30.5
  Background counts = 212.6
  Rate = 0.005 +/- 0.0005

[Thu Nov 24 05:20:01 2011] Off-axis axis estimate = 5.62'
[Thu Nov 24 10:53:33 2011] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 10:53:33 2011] Initial guess for spatial extent in simple fitting = 9.24"
[Thu Nov 24 10:53:33 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.908
[Thu Nov 24 10:53:33 2011] Giving source the simple spatial ID 63 for pass 0, mean size = 9.24"
[Thu Nov 24 16:42:26 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src63.ximg exists
[Thu Nov 24 16:42:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src63.csv
[Thu Nov 24 16:42:26 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src63_1.ximg exists
[Thu Nov 24 16:42:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src63.csv
[Thu Nov 24 16:42:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 16:42:29 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Thu Nov 24 16:42:29 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Thu Nov 24 16:42:29 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Fri Nov 25 01:01:51 2011] Spatial fit model total counts = 3214.300000, observed total counts = 3210.000000
[Fri Nov 25 01:01:51 2011] Offset between fit and detection position for source 61 = 0.089163 pixels
[Fri Nov 25 01:01:51 2011] 3221.647000 total counts/ 3084.620000 bgd. counts: snr = 2.467205
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 0.089163 pixels
  Position = (368.1, 332.2) = 14 44 58.45 -62 27 8.4
  Extent = 4.3 (3.3-5.3)", rotation angle = 0
  Source counts = 137.0 +/- 56.8
  Background counts = 3084.6
  Rate = 0.002 +/- 0.0008
[Fri Nov 25 01:01:52 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:52 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 01:01:52 2011] Source does appear to be extended
[Fri Nov 25 01:01:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 15:11:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 15:11:47 2011] Initial guess for spatial extent in simple fitting = 4.30"
[Fri Nov 25 15:11:47 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.017
[Fri Nov 25 15:11:47 2011] Giving source the simple spatial ID 61 for pass 1, mean size = 4.30"
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src61.ximg exists
[Fri Nov 25 23:57:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src61.csv
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src61_1.ximg exists
[Fri Nov 25 23:57:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src61.csv
[Fri Nov 25 23:57:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 23:57:18 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Fri Nov 25 23:57:18 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Fri Nov 25 23:57:18 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Sat Nov 26 11:50:59 2011] Spatial fit model total counts = 3207.570000, observed total counts = 3210.000000
[Sat Nov 26 11:50:59 2011] Offset between fit and detection position for source 61 = 0.021896 pixels
[Sat Nov 26 11:50:59 2011] 3134.222000 total counts/ 2988.730000 bgd. counts: snr = 2.661312
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 0.021896 pixels
  Position = (368.1, 332.2) = 14 44 58.45 -62 27 8.4
  Extent = 4.5 (3.3-6.6)", rotation angle = 0
  Source counts = 145.5 +/- 56.0
  Background counts = 2988.7
  Rate = 0.002 +/- 0.0007
[Sat Nov 26 11:51:00 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:00 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:00 2011] Source does appear to be extended
[Sat Nov 26 11:51:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 12:13:46 2011] XMMSAS src. selection expression = ellipse(31978.003140, 28853.801200, 267.730808, 267.730808, 0.000000, X, Y)
[Mon Nov 28 12:13:46 2011] Writing source region out to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src61_src.reg
[Mon Nov 28 12:13:46 2011] Extracting stamp from image fullrun_mos1_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (353, 317) - (384, 348)
[Mon Nov 28 12:13:46 2011] XMMSAS bgd. selection expression = annulus(31978.003140, 28853.801200, 446.218013, 892.436026, X, Y) && !ellipse(30504.082360, 29558.738000, 981.344028, 981.344028, 0.000000, X, Y) && !ellipse(30983.436000, 30456.480000, 1506.488043, 1506.488043, 0.000000, X, Y) && !ellipse(30583.358200, 27941.724000, 1367.560039, 1367.560039, 0.000000, X, Y) && !ellipse(30316.086195, 30337.009514, 1442.496042, 766.040689, 71.186769, X, Y) && !ellipse(31387.538000, 29605.725940, 1127.768032, 1127.768032, 0.000000, X, Y) && !ellipse(30791.157400, 27621.982000, 1378.280040, 1378.280040, 0.000000, X, Y) && !ellipse(29709.332000, 30083.570000, 1406.016040, 1406.016040, 0.000000, X, Y) && !ellipse(30867.062000, 27315.132000, 1983.720057, 1983.720057, 0.000000, X, Y) && !ellipse(30411.168000, 28292.836000, 1670.064048, 1670.064048, 0.000000, X, Y)
[Mon Nov 28 12:13:46 2011] Writing fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src61.gif
[Mon Nov 28 17:40:51 2011] Mean detx,y = (618.44, 5055.81) 
[Mon Nov 28 17:40:55 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 17:41:09 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 17:41:10 2011] Setting source spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Mon Nov 28 17:41:10 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Wed Nov 30 00:29:21 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:21 2011] Error reading totcts from fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Wed Nov 30 00:29:26 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:26 2011] Using photon index=1.80, rate=0.00195, arf fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src61.arf
[Wed Nov 30 00:29:26 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:26 2011] Updating source flux to 2.9e-14