[Thu Nov 24 05:19:59 2011] Detection parameters:
  Position = (348.5, 333.1) = 14 45 10.74 -62 27 5.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 375.7 +/- 34.6
  Background counts = 256.7
  Rate = 0.005 +/- 0.0005

[Thu Nov 24 05:20:01 2011] Off-axis axis estimate = 4.41'
[Thu Nov 24 10:53:33 2011] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 10:53:33 2011] Initial guess for spatial extent in simple fitting = 8.64"
[Thu Nov 24 10:53:33 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.012
[Thu Nov 24 10:53:33 2011] Giving source the simple spatial ID 59 for pass 0, mean size = 8.64"
[Thu Nov 24 16:42:26 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src59.ximg exists
[Thu Nov 24 16:42:26 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src59_1.ximg exists
[Thu Nov 24 16:42:26 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src59 appears to have run properly
[Thu Nov 24 16:42:29 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Thu Nov 24 16:42:29 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Thu Nov 24 16:42:29 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Fri Nov 25 01:01:51 2011] Spatial fit model total counts = 4283.810000, observed total counts = 4283.000000
[Fri Nov 25 01:01:51 2011] Offset between fit and detection position for source 60 = 5.737937 pixels
[Fri Nov 25 01:01:51 2011] 4108.250000 total counts/ 3051.130000 bgd. counts: snr = 19.137885
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 5.737937 pixels
  Position = (350.0, 338.6) = 14 45 9.81 -62 26 40.8
  Extent = 17.3 (14.7-34.5)", rotation angle = 0
  Source counts = 1057.1 +/- 64.1
  Background counts = 3051.1
  Rate = 0.01 +/- 0.0009
[Fri Nov 25 01:01:52 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:52 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 01:01:52 2011] Source does appear to be extended
[Fri Nov 25 01:01:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:01:52 2011] Source is confused with source 39
[Fri Nov 25 15:11:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 15:11:47 2011] Initial guess for spatial extent in simple fitting = 17.27"
[Fri Nov 25 15:11:47 2011] source mask rpix=4.0, npix_max = 79, mask sum = 72, frac = 0.901
[Fri Nov 25 15:11:47 2011] Giving source the simple spatial ID 57 for pass 1, mean size = 17.27"
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src57.ximg exists
[Fri Nov 25 23:57:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src57.csv
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src57_1.ximg exists
[Fri Nov 25 23:57:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src57.csv
[Fri Nov 25 23:57:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 23:57:18 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Fri Nov 25 23:57:18 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Fri Nov 25 23:57:18 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly
[Sat Nov 26 11:50:58 2011] Spatial fit model total counts = 5979.190000, observed total counts = 5751.000000
[Sat Nov 26 11:50:58 2011] Offset between fit and detection position for source 60 = 6.863775 pixels
[Sat Nov 26 11:50:58 2011] Warning, changing simple spatial fit ID from 57 to 38
[Sat Nov 26 11:50:58 2011] 5653.740000 total counts/ 4007.220000 bgd. counts: snr = 26.010303
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 6.863775 pixels
  Position = (350.8, 345.4) = 14 45 9.36 -62 26 11.1
  Extent = 27.6" x 12.5", rotation angle = 69
  Source counts = 1646.5 +/- 75.2
  Background counts = 4007.2
  Rate = 0.02 +/- 0.001
[Sat Nov 26 11:50:58 2011] Spatial fit model total counts = 8943.400000, observed total counts = 8948.000000
[Sat Nov 26 11:50:58 2011] Offset between fit and detection position for source 60 = 3.583583 pixels
[Sat Nov 26 11:50:58 2011] Warning, changing simple spatial fit ID from 38 to 57
[Sat Nov 26 11:50:59 2011] 8060.879000 total counts/ 7719.240000 bgd. counts: snr = 3.888483
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 3.583583 pixels
  Position = (348.8, 348.4) = 14 45 10.57 -62 25 58.0
  Extent = 8.6 (7.1-10.3)", rotation angle = 0
  Source counts = 341.6 +/- 89.8
  Background counts = 7719.2
  Rate = 0.005 +/- 0.001
[Sat Nov 26 11:51:00 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:00 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:00 2011] Source does appear to be extended
[Sat Nov 26 11:51:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 12:13:46 2011] XMMSAS src. selection expression = ellipse(30299.384400, 30264.968000, 515.772615, 515.772615, 0.000000, X, Y)
[Mon Nov 28 12:13:46 2011] Writing source region out to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src60_src.reg
[Mon Nov 28 12:13:46 2011] Extracting stamp from image fullrun_mos1_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (319, 319) - (378, 378)
[Mon Nov 28 12:13:46 2011] XMMSAS bgd. selection expression = annulus(30299.384400, 30264.968000, 859.621025, 1719.242049, X, Y) && !ellipse(27817.888000, 28935.027600, 1260.344036, 922.752027, 123.079700, X, Y) && !ellipse(26911.278130, 26968.622053, 1918.904055, 749.307212, 112.443825, X, Y) && !ellipse(28393.996000, 31156.598000, 1372.104039, 1372.104039, 0.000000, X, Y) && !ellipse(26935.910000, 27045.420000, 2229.384064, 2229.384064, 0.000000, X, Y) && !ellipse(27795.072000, 30072.842000, 1372.104039, 1372.104039, 0.000000, X, Y) && !ellipse(28200.823212, 30534.039062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28040.151459, 29452.109314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28958.979200, 33467.806000, 1761.520051, 1761.520051, 0.000000, X, Y) && !ellipse(30247.599600, 32247.072000, 1557.144045, 1557.144045, 0.000000, X, Y) && !ellipse(28367.060000, 31783.916000, 1496.424043, 1496.424043, 0.000000, X, Y) && !ellipse(29024.755400, 33009.812000, 1520.696044, 1520.696044, 0.000000, X, Y) && !ellipse(30238.942400, 31509.708400, 1131.344033, 1131.344033, 0.000000, X, Y) && !ellipse(30142.012000, 31671.966000, 1587.832046, 1587.832046, 0.000000, X, Y) && !ellipse(30504.082360, 29558.738000, 981.344028, 981.344028, 0.000000, X, Y) && !ellipse(27283.950580, 30925.575400, 1358.488039, 1358.488039, 0.000000, X, Y) && !ellipse(30983.436000, 30456.480000, 1506.488043, 1506.488043, 0.000000, X, Y) && !ellipse(30583.358200, 27941.724000, 1367.560039, 1367.560039, 0.000000, X, Y) && !ellipse(30316.086195, 30337.009514, 1442.496042, 766.040689, 71.186769, X, Y) && !ellipse(31387.538000, 29605.725940, 1127.768032, 1127.768032, 0.000000, X, Y) && !ellipse(30791.157400, 27621.982000, 1378.280040, 1378.280040, 0.000000, X, Y) && !ellipse(31978.003140, 28853.801200, 356.974410, 356.974410, 0.000000, X, Y) && !ellipse(29709.332000, 30083.570000, 1406.016040, 1406.016040, 0.000000, X, Y) && !ellipse(30867.062000, 27315.132000, 1983.720057, 1983.720057, 0.000000, X, Y) && !ellipse(30411.168000, 28292.836000, 1670.064048, 1670.064048, 0.000000, X, Y) && !ellipse(28843.411987, 30336.122559, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 12:13:46 2011] Writing fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src60.gif
[Mon Nov 28 17:36:49 2011] Mean detx,y = (2293.95, 3608.96) 
[Mon Nov 28 17:36:52 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 17:37:08 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 17:37:09 2011] Setting source spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Mon Nov 28 17:37:09 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Wed Nov 30 00:29:21 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:21 2011] Error reading totcts from fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Wed Nov 30 00:29:26 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:26 2011] Using photon index=1.80, rate=0.00457, arf fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src60.arf
[Wed Nov 30 00:29:26 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:26 2011] Updating source flux to 5e-14
[Wed Nov 30 00:29:47 2011] Flag c found in src. 60 procflags, skipping spectral fitting