[Thu Nov 24 05:19:59 2011] Detection parameters:
  Position = (337.8, 350.3) = 14 45 17.49 -62 25 43.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 265.8 +/- 26.4
  Background counts = 261.9
  Rate = 0.005 +/- 0.0005

[Thu Nov 24 05:20:01 2011] Off-axis axis estimate = 4.72'
[Thu Nov 24 10:53:33 2011] Using EEF radius (= 8.79 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 10:53:33 2011] Initial guess for spatial extent in simple fitting = 8.79"
[Thu Nov 24 10:53:33 2011] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.827
[Thu Nov 24 10:53:33 2011] Giving source the simple spatial ID 67 for pass 0, mean size = 8.79"
[Thu Nov 24 16:42:27 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src67.ximg exists
[Thu Nov 24 16:42:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src67.csv
[Thu Nov 24 16:42:27 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src67_1.ximg exists
[Thu Nov 24 16:42:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src67.csv
[Thu Nov 24 16:42:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 16:42:29 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Thu Nov 24 16:42:29 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Thu Nov 24 16:42:29 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Fri Nov 25 01:01:52 2011] Warning, spatial fit 67 centroid is now closest to src. 3
[Fri Nov 25 01:01:52 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:52 2011] Assessing source extent using major
[Fri Nov 25 01:01:52 2011] Source does appear to be extended
[Fri Nov 25 01:01:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:01:52 2011] Source is confused with source 37
[Fri Nov 25 01:01:52 2011] Source is confused with source 80
[Fri Nov 25 15:11:47 2011] Using EEF radius (= 8.79 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 15:11:47 2011] Initial guess for spatial extent in simple fitting = 8.79"
[Fri Nov 25 15:11:47 2011] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.827
[Fri Nov 25 15:11:47 2011] Giving source the simple spatial ID 64 for pass 1, mean size = 8.79"
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src64.ximg exists
[Fri Nov 25 23:57:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src64.csv
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src64_1.ximg exists
[Fri Nov 25 23:57:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src64.csv
[Fri Nov 25 23:57:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 23:57:18 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Fri Nov 25 23:57:18 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Fri Nov 25 23:57:18 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src64 appears to have run properly
[Sat Nov 26 11:50:58 2011] Source 58 is offset by -1.757527 and 3.814198 pixels which is larger than
2 X fitted extent = 1.568317 x 1.568317, not incorporating fit results
[Sat Nov 26 11:50:58 2011] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 58 at 23.332182 pixels away
[Sat Nov 26 11:50:59 2011] Spatial fit model total counts = 4056.920000, observed total counts = 4053.000000
[Sat Nov 26 11:50:59 2011] Offset between fit and detection position for source 58 = 5.786863 pixels
[Sat Nov 26 11:50:59 2011] 3812.737000 total counts/ 2844.260000 bgd. counts: snr = 18.159533
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 5.786863 pixels
  Position = (342.0, 346.3) = 14 45 14.82 -62 26 7.1
  Extent = 17.6 (17.5-35.2)", rotation angle = 0
  Source counts = 968.5 +/- 61.7
  Background counts = 2844.3
  Rate = 0.01 +/- 0.0008
[Sat Nov 26 11:51:00 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:00 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:00 2011] Source does appear to be extended
[Sat Nov 26 11:51:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 12:13:46 2011] XMMSAS src. selection expression = ellipse(29709.332000, 30083.570000, 1054.512030, 1054.512030, 0.000000, X, Y)
[Mon Nov 28 12:13:46 2011] Writing source region out to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src58_src.reg
[Mon Nov 28 12:13:46 2011] Extracting stamp from image fullrun_mos1_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (281, 286) - (403, 407)
[Mon Nov 28 12:13:47 2011] XMMSAS bgd. selection expression = annulus(29709.332000, 30083.570000, 1757.520051, 3515.040101, X, Y) && !ellipse(26653.601020, 25843.457000, 1078.544031, 1078.544031, 0.000000, X, Y) && !ellipse(27817.888000, 28935.027600, 1260.344036, 922.752027, 123.079700, X, Y) && !ellipse(26911.278130, 26968.622053, 1918.904055, 749.307212, 112.443825, X, Y) && !ellipse(28393.996000, 31156.598000, 1372.104039, 1372.104039, 0.000000, X, Y) && !ellipse(26935.910000, 27045.420000, 2229.384064, 2229.384064, 0.000000, X, Y) && !ellipse(27795.072000, 30072.842000, 1372.104039, 1372.104039, 0.000000, X, Y) && !ellipse(26482.841000, 25043.682600, 2187.712063, 841.816024, 111.678000, X, Y) && !ellipse(28200.823212, 30534.039062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28040.151459, 29452.109314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28958.979200, 33467.806000, 1761.520051, 1761.520051, 0.000000, X, Y) && !ellipse(30247.599600, 32247.072000, 1557.144045, 1557.144045, 0.000000, X, Y) && !ellipse(28367.060000, 31783.916000, 1496.424043, 1496.424043, 0.000000, X, Y) && !ellipse(29024.755400, 33009.812000, 1520.696044, 1520.696044, 0.000000, X, Y) && !ellipse(29282.090000, 34152.476800, 1258.896036, 592.713617, -0.000000, X, Y) && !ellipse(30238.942400, 31509.708400, 1131.344033, 1131.344033, 0.000000, X, Y) && !ellipse(30142.012000, 31671.966000, 1587.832046, 1587.832046, 0.000000, X, Y) && !ellipse(30504.082360, 29558.738000, 981.344028, 981.344028, 0.000000, X, Y) && !ellipse(26418.478149, 28662.134552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27283.950580, 30925.575400, 1358.488039, 1358.488039, 0.000000, X, Y) && !ellipse(29050.956000, 34663.310000, 1675.912048, 1110.192032, 269.780000, X, Y) && !ellipse(26416.370000, 29728.690000, 1308.280038, 1308.280038, 0.000000, X, Y) && !ellipse(25773.562260, 27766.212000, 506.828815, 506.828815, 0.000000, X, Y) && !ellipse(30983.436000, 30456.480000, 1506.488043, 1506.488043, 0.000000, X, Y) && !ellipse(30583.358200, 27941.724000, 1367.560039, 1367.560039, 0.000000, X, Y) && !ellipse(30316.086195, 30337.009514, 1442.496042, 766.040689, 71.186769, X, Y) && !ellipse(29972.918000, 35202.716000, 2863.344082, 1277.208037, -0.000000, X, Y) && !ellipse(27226.308600, 32087.822600, 389.080811, 389.080811, 0.000000, X, Y) && !ellipse(31387.538000, 29605.725940, 1127.768032, 1127.768032, 0.000000, X, Y) && !ellipse(29038.951000, 33739.186000, 1313.056038, 1313.056038, 0.000000, X, Y) && !ellipse(30791.157400, 27621.982000, 1378.280040, 1378.280040, 0.000000, X, Y) && !ellipse(30299.384400, 30264.968000, 687.696820, 687.696820, 0.000000, X, Y) && !ellipse(31978.003140, 28853.801200, 356.974410, 356.974410, 0.000000, X, Y) && !ellipse(30867.062000, 27315.132000, 1983.720057, 1983.720057, 0.000000, X, Y) && !ellipse(30411.168000, 28292.836000, 1670.064048, 1670.064048, 0.000000, X, Y) && !ellipse(28843.411987, 30336.122559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34806.985055, 26416.280438, 1625.952047, 439.023405, 80.158338, X, Y) && !ellipse(27771.964294, 33779.111450, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 12:13:47 2011] Writing fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src58.gif
[Mon Nov 28 17:42:45 2011] Mean detx,y = (2183.18, 3100.51) 
[Mon Nov 28 17:42:48 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 17:43:12 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 17:43:12 2011] Setting source spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Mon Nov 28 17:43:12 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Wed Nov 30 00:29:21 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:21 2011] Error reading totcts from fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Wed Nov 30 00:29:26 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:26 2011] Using photon index=1.80, rate=0.013, arf fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src58.arf
[Wed Nov 30 00:29:26 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:26 2011] Updating source flux to 1.2e-13
[Wed Nov 30 00:29:47 2011] Flag b found in src. 58 procflags, skipping spectral fitting
[Wed Nov 30 00:29:47 2011] Flag c found in src. 58 procflags, skipping spectral fitting