[Thu Nov 24 05:19:59 2011] Detection parameters:
  Position = (336.2, 413.2) = 14 45 18.54 -62 21 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 205.0 +/- 26.9
  Background counts = 161.8
  Rate = 0.005 +/- 0.0007

[Thu Nov 24 05:20:01 2011] Off-axis axis estimate = 8.76'
[Thu Nov 24 10:53:33 2011] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 10:53:33 2011] Initial guess for spatial extent in simple fitting = 10.81"
[Thu Nov 24 10:53:33 2011] source mask rpix=2.5, npix_max = 35, mask sum = 29, frac = 0.814
[Thu Nov 24 10:53:33 2011] Giving source the simple spatial ID 62 for pass 0, mean size = 10.81"
[Thu Nov 24 16:42:26 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src62.ximg exists
[Thu Nov 24 16:42:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src62.csv
[Thu Nov 24 16:42:26 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src62_1.ximg exists
[Thu Nov 24 16:42:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src62.csv
[Thu Nov 24 16:42:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 16:42:29 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Thu Nov 24 16:42:29 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Thu Nov 24 16:42:29 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly
[Fri Nov 25 01:01:51 2011] Source 52 is offset by -6.159200 and -4.065791 pixels which is larger than
2 X fitted extent = 4.029324 x 4.029324, not incorporating fit results
[Fri Nov 25 01:01:52 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:52 2011] Assessing source extent using major
[Fri Nov 25 01:01:52 2011] Source does appear to be extended
[Fri Nov 25 01:01:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:01:52 2011] Source is confused with source 24
[Fri Nov 25 15:11:47 2011] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 15:11:47 2011] Initial guess for spatial extent in simple fitting = 10.81"
[Fri Nov 25 15:11:47 2011] source mask rpix=2.5, npix_max = 35, mask sum = 29, frac = 0.814
[Fri Nov 25 15:11:47 2011] Giving source the simple spatial ID 60 for pass 1, mean size = 10.81"
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src60.ximg exists
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src60_1.ximg exists
[Fri Nov 25 23:57:15 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src60 appears to have run properly
[Fri Nov 25 23:57:18 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Fri Nov 25 23:57:18 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Fri Nov 25 23:57:18 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src60 appears to have run properly
[Sat Nov 26 11:50:58 2011] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 15.505003 pixels away
[Sat Nov 26 11:50:59 2011] Warning, spatial fit 60 centroid is now closest to src. 51
[Sat Nov 26 11:51:00 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:00 2011] Assessing source extent using major
[Sat Nov 26 11:51:00 2011] Source does appear to be extended
[Sat Nov 26 11:51:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 12:13:46 2011] XMMSAS src. selection expression = ellipse(29201.227631, 35899.792206, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 12:13:46 2011] Writing source region out to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src52_src.reg
[Mon Nov 28 12:13:46 2011] Extracting stamp from image fullrun_mos1_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (299, 376) - (374, 451)
[Mon Nov 28 12:13:46 2011] XMMSAS bgd. selection expression = annulus(29201.227631, 35899.792206, 1087.500000, 2175.000000, X, Y) && !ellipse(28958.979200, 33467.806000, 1761.520051, 1761.520051, 0.000000, X, Y) && !ellipse(30247.599600, 32247.072000, 1557.144045, 1557.144045, 0.000000, X, Y) && !ellipse(29485.330000, 39250.838000, 1993.752057, 1993.752057, 0.000000, X, Y) && !ellipse(29024.755400, 33009.812000, 1520.696044, 1520.696044, 0.000000, X, Y) && !ellipse(29282.090000, 34152.476800, 1258.896036, 592.713617, -0.000000, X, Y) && !ellipse(29984.421448, 37972.002747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29565.900400, 35792.028000, 904.464026, 904.464026, 0.000000, X, Y) && !ellipse(29050.956000, 34663.310000, 1675.912048, 1110.192032, 269.780000, X, Y) && !ellipse(29558.586609, 37021.847412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29647.802000, 36416.280000, 1661.984048, 519.559215, 83.760672, X, Y) && !ellipse(29972.918000, 35202.716000, 2863.344082, 1277.208037, -0.000000, X, Y) && !ellipse(31035.560000, 39842.320000, 1974.536057, 1974.536057, 0.000000, X, Y) && !ellipse(29038.951000, 33739.186000, 1313.056038, 1313.056038, 0.000000, X, Y) && !ellipse(26517.513397, 38276.970032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27771.964294, 33779.111450, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 12:13:46 2011] Writing fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src52.gif
[Mon Nov 28 17:40:21 2011] Mean detx,y = (7958.43, 3392.59) 
[Mon Nov 28 17:40:24 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 17:40:38 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 17:40:38 2011] Setting source spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Mon Nov 28 17:40:38 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Tue Nov 29 02:42:14 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 02:42:14 2011] rmf not generated due to insufficient counts
[Wed Nov 30 00:29:21 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:21 2011] Error reading totcts from fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Wed Nov 30 00:29:26 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:26 2011] Using photon index=1.80, rate=0.00524, arf fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src52.arf
[Wed Nov 30 00:29:26 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:26 2011] Updating source flux to 7.3e-14
[Wed Nov 30 00:29:47 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting