[Thu Nov 24 05:19:59 2011] Detection parameters:
  Position = (331.2, 292.1) = 14 45 21.54 -62 30 2.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1331.6 +/- 51.8
  Background counts = 224.3
  Rate = 0.02 +/- 0.0007

[Thu Nov 24 05:20:01 2011] Off-axis axis estimate = 2.42'
[Thu Nov 24 10:53:33 2011] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 10:53:33 2011] Initial guess for spatial extent in simple fitting = 7.64"
[Thu Nov 24 10:53:33 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.786
[Thu Nov 24 10:53:33 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 7.64"
[Thu Nov 24 16:42:25 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src13.ximg exists
[Thu Nov 24 16:42:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src13.csv
[Thu Nov 24 16:42:25 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Nov 24 16:42:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src13.csv
[Thu Nov 24 16:42:25 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 16:42:27 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Nov 24 16:42:27 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Nov 24 16:42:27 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Nov 25 01:01:51 2011] Spatial fit model total counts = 4487.260000, observed total counts = 4491.000000
[Fri Nov 25 01:01:51 2011] Offset between fit and detection position for source 43 = 0.256948 pixels
[Fri Nov 25 01:01:51 2011] 4356.860000 total counts/ 3234.310000 bgd. counts: snr = 19.738533
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.256948 pixels
  Position = (331.4, 292.3) = 14 45 21.44 -62 30 2.1
  Extent = 8.4 (7.6-9.0)", rotation angle = 0
  Source counts = 1122.5 +/- 66.0
  Background counts = 3234.3
  Rate = 0.02 +/- 0.0009
[Fri Nov 25 01:01:52 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:52 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 01:01:52 2011] Source does appear to be extended
[Fri Nov 25 01:01:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 15:11:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 15:11:47 2011] Initial guess for spatial extent in simple fitting = 8.37"
[Fri Nov 25 15:11:47 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.064
[Fri Nov 25 15:11:47 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 8.37"
[Fri Nov 25 23:57:14 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src13.ximg exists
[Fri Nov 25 23:57:14 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Nov 25 23:57:14 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src13 appears to have run properly
[Fri Nov 25 23:57:16 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Nov 25 23:57:16 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Nov 25 23:57:16 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Nov 26 11:50:58 2011] Spatial fit model total counts = 4485.540000, observed total counts = 4491.000000
[Sat Nov 26 11:50:58 2011] Offset between fit and detection position for source 43 = 0.003347 pixels
[Sat Nov 26 11:50:58 2011] 4355.550000 total counts/ 3229.690000 bgd. counts: snr = 19.810889
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.003347 pixels
  Position = (331.4, 292.3) = 14 45 21.44 -62 30 2.1
  Extent = 8.3 (7.7-9.0)", rotation angle = 0
  Source counts = 1125.9 +/- 66.0
  Background counts = 3229.7
  Rate = 0.02 +/- 0.0009
[Sat Nov 26 11:51:00 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:00 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:00 2011] Source does appear to be extended
[Sat Nov 26 11:51:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 12:13:41 2011] Counts = 1125.860000, rescaling region sizes by 2.000000
[Mon Nov 28 12:13:41 2011] XMMSAS src. selection expression = ellipse(28783.717400, 25385.089600, 996.033629, 996.033629, 0.000000, X, Y)
[Mon Nov 28 12:13:41 2011] Writing source region out to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src43_src.reg
[Mon Nov 28 12:13:41 2011] Extracting stamp from image fullrun_mos1_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (274, 235) - (389, 350)
[Mon Nov 28 12:13:41 2011] XMMSAS bgd. selection expression = annulus(28783.717400, 25385.089600, 3320.112096, 6640.224191, X, Y) && !ellipse(26653.601020, 25843.457000, 1078.544031, 1078.544031, 0.000000, X, Y) && !ellipse(27817.888000, 28935.027600, 1260.344036, 922.752027, 123.079700, X, Y) && !ellipse(26911.278130, 26968.622053, 1918.904055, 749.307212, 112.443825, X, Y) && !ellipse(28393.996000, 31156.598000, 1372.104039, 1372.104039, 0.000000, X, Y) && !ellipse(26935.910000, 27045.420000, 2229.384064, 2229.384064, 0.000000, X, Y) && !ellipse(26018.658900, 23534.669800, 1918.904055, 859.680025, 108.012200, X, Y) && !ellipse(26705.344000, 25575.540000, 966.504028, 434.852013, 90.000000, X, Y) && !ellipse(25916.975000, 22648.059520, 1251.512036, 901.048026, 269.647000, X, Y) && !ellipse(27795.072000, 30072.842000, 1372.104039, 1372.104039, 0.000000, X, Y) && !ellipse(26482.841000, 25043.682600, 2187.712063, 841.816024, 111.678000, X, Y) && !ellipse(28200.823212, 30534.039062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28040.151459, 29452.109314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28958.979200, 33467.806000, 1761.520051, 1761.520051, 0.000000, X, Y) && !ellipse(30247.599600, 32247.072000, 1557.144045, 1557.144045, 0.000000, X, Y) && !ellipse(28367.060000, 31783.916000, 1496.424043, 1496.424043, 0.000000, X, Y) && !ellipse(27660.243600, 21342.538000, 941.016027, 941.016027, 0.000000, X, Y) && !ellipse(29024.755400, 33009.812000, 1520.696044, 1520.696044, 0.000000, X, Y) && !ellipse(30238.942400, 31509.708400, 1131.344033, 1131.344033, 0.000000, X, Y) && !ellipse(30142.012000, 31671.966000, 1587.832046, 1587.832046, 0.000000, X, Y) && !ellipse(30504.082360, 29558.738000, 981.344028, 981.344028, 0.000000, X, Y) && !ellipse(26418.478149, 28662.134552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27283.950580, 30925.575400, 1358.488039, 1358.488039, 0.000000, X, Y) && !ellipse(26416.370000, 29728.690000, 1308.280038, 1308.280038, 0.000000, X, Y) && !ellipse(25773.562260, 27766.212000, 506.828815, 506.828815, 0.000000, X, Y) && !ellipse(25912.132202, 21422.036926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30983.436000, 30456.480000, 1506.488043, 1506.488043, 0.000000, X, Y) && !ellipse(27554.346000, 22075.898000, 1282.776037, 1282.776037, 0.000000, X, Y) && !ellipse(30583.358200, 27941.724000, 1367.560039, 1367.560039, 0.000000, X, Y) && !ellipse(30316.086195, 30337.009514, 1442.496042, 766.040689, 71.186769, X, Y) && !ellipse(27892.794000, 25077.520600, 835.144024, 835.144024, 0.000000, X, Y) && !ellipse(29248.876400, 22948.429800, 982.056028, 982.056028, 0.000000, X, Y) && !ellipse(25079.173600, 25498.798000, 789.829623, 789.829623, 0.000000, X, Y) && !ellipse(27226.308600, 32087.822600, 389.080811, 389.080811, 0.000000, X, Y) && !ellipse(31387.538000, 29605.725940, 1127.768032, 1127.768032, 0.000000, X, Y) && !ellipse(22908.837800, 22875.163000, 354.168810, 354.168810, 0.000000, X, Y) && !ellipse(27179.983032, 24914.717346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29791.080000, 24143.280000, 1282.008037, 1282.008037, 0.000000, X, Y) && !ellipse(22871.890800, 27028.780000, 355.445610, 355.445610, 0.000000, X, Y) && !ellipse(30791.157400, 27621.982000, 1378.280040, 1378.280040, 0.000000, X, Y) && !ellipse(30299.384400, 30264.968000, 687.696820, 687.696820, 0.000000, X, Y) && !ellipse(31978.003140, 28853.801200, 356.974410, 356.974410, 0.000000, X, Y) && !ellipse(35198.067963, 23867.183502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29709.332000, 30083.570000, 1406.016040, 1406.016040, 0.000000, X, Y) && !ellipse(30867.062000, 27315.132000, 1983.720057, 1983.720057, 0.000000, X, Y) && !ellipse(28239.902588, 22249.105103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30411.168000, 28292.836000, 1670.064048, 1670.064048, 0.000000, X, Y) && !ellipse(22747.584198, 26591.477203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28843.411987, 30336.122559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35235.363800, 21038.906000, 3415.008098, 1284.448037, 86.454630, X, Y) && !ellipse(28622.465759, 21845.664108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28116.340179, 25506.111847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34806.985055, 26416.280438, 1625.952047, 439.023405, 80.158338, X, Y) && !ellipse(29503.600952, 24659.619476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35504.609680, 24296.730072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35264.276428, 21876.463776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24449.875200, 20735.472400, 1386.136040, 366.852811, 343.858011, X, Y) && !ellipse(32548.762000, 23676.146000, 1518.648044, 670.410419, 45.808000, X, Y)
[Mon Nov 28 12:13:41 2011] Writing fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src43.gif
[Mon Nov 28 14:26:13 2011] Mean detx,y = (-2361.84, 1360.35) 
[Mon Nov 28 14:26:17 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 14:28:26 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 14:28:26 2011] Setting source spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Mon Nov 28 14:28:26 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Wed Nov 30 00:29:18 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:18 2011] Error reading totcts from fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed Nov 30 00:29:24 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:24 2011] Using photon index=1.80, rate=0.0151, arf fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src43.arf
[Wed Nov 30 00:29:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:24 2011] Updating source flux to 1.5e-13