[Thu Nov 24 05:19:59 2011] Detection parameters:
  Position = (304.2, 330.0) = 14 45 38.52 -62 27 17.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 797.6 +/- 42.1
  Background counts = 146.6
  Rate = 0.01 +/- 0.0006

[Thu Nov 24 05:20:01 2011] Off-axis axis estimate = 2.33'
[Thu Nov 24 10:53:33 2011] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 10:53:33 2011] Initial guess for spatial extent in simple fitting = 7.59"
[Thu Nov 24 10:53:33 2011] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.793
[Thu Nov 24 10:53:33 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 7.59"
[Thu Nov 24 16:42:26 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src27.ximg exists
[Thu Nov 24 16:42:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src27.csv
[Thu Nov 24 16:42:26 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu Nov 24 16:42:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src27.csv
[Thu Nov 24 16:42:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 16:42:28 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu Nov 24 16:42:28 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu Nov 24 16:42:28 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Nov 25 01:01:51 2011] Source 40 is offset by -6.763033 and 5.988466 pixels which is larger than
2 X fitted extent = 0.872648 x 0.872648, not incorporating fit results
[Fri Nov 25 01:01:52 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:52 2011] Assessing source extent using major
[Fri Nov 25 01:01:52 2011] Source does appear to be extended
[Fri Nov 25 01:01:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 15:11:47 2011] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 15:11:47 2011] Initial guess for spatial extent in simple fitting = 7.59"
[Fri Nov 25 15:11:47 2011] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.793
[Fri Nov 25 15:11:47 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 7.59"
[Fri Nov 25 23:57:14 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src26.ximg exists
[Fri Nov 25 23:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src26.csv
[Fri Nov 25 23:57:14 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri Nov 25 23:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src26.csv
[Fri Nov 25 23:57:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 23:57:17 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri Nov 25 23:57:17 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri Nov 25 23:57:17 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Sat Nov 26 11:50:58 2011] Source 40 is offset by -6.763033 and 5.988466 pixels which is larger than
2 X fitted extent = 0.872648 x 0.872648, not incorporating fit results
[Sat Nov 26 11:50:58 2011] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 24.086467 pixels away
[Sat Nov 26 11:51:00 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:00 2011] Assessing source extent using major
[Sat Nov 26 11:51:00 2011] Source does appear to be extended
[Sat Nov 26 11:51:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 12:13:43 2011] XMMSAS src. selection expression = ellipse(26418.478149, 28662.134552, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 12:13:43 2011] Writing source region out to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src40_src.reg
[Mon Nov 28 12:13:43 2011] Extracting stamp from image fullrun_mos1_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (267, 293) - (342, 368)
[Mon Nov 28 12:13:43 2011] XMMSAS bgd. selection expression = annulus(26418.478149, 28662.134552, 1087.500000, 2175.000000, X, Y) && !ellipse(26653.601020, 25843.457000, 1078.544031, 1078.544031, 0.000000, X, Y) && !ellipse(27817.888000, 28935.027600, 1260.344036, 922.752027, 123.079700, X, Y) && !ellipse(26911.278130, 26968.622053, 1918.904055, 749.307212, 112.443825, X, Y) && !ellipse(28393.996000, 31156.598000, 1372.104039, 1372.104039, 0.000000, X, Y) && !ellipse(26935.910000, 27045.420000, 2229.384064, 2229.384064, 0.000000, X, Y) && !ellipse(26705.344000, 25575.540000, 966.504028, 434.852013, 90.000000, X, Y) && !ellipse(27795.072000, 30072.842000, 1372.104039, 1372.104039, 0.000000, X, Y) && !ellipse(26482.841000, 25043.682600, 2187.712063, 841.816024, 111.678000, X, Y) && !ellipse(28200.823212, 30534.039062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28040.151459, 29452.109314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28367.060000, 31783.916000, 1496.424043, 1496.424043, 0.000000, X, Y) && !ellipse(30142.012000, 31671.966000, 1587.832046, 1587.832046, 0.000000, X, Y) && !ellipse(27283.950580, 30925.575400, 1358.488039, 1358.488039, 0.000000, X, Y) && !ellipse(26416.370000, 29728.690000, 1308.280038, 1308.280038, 0.000000, X, Y) && !ellipse(25773.562260, 27766.212000, 506.828815, 506.828815, 0.000000, X, Y) && !ellipse(29709.332000, 30083.570000, 1406.016040, 1406.016040, 0.000000, X, Y) && !ellipse(28843.411987, 30336.122559, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 12:13:43 2011] Writing fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src40.gif
[Mon Nov 28 15:45:06 2011] Mean detx,y = (1182.41, -427.38) 
[Mon Nov 28 15:45:09 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 15:45:32 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 15:45:33 2011] Setting source spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon Nov 28 15:45:33 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Mon Nov 28 23:12:32 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Nov 28 23:12:32 2011] rmf not generated due to insufficient counts
[Wed Nov 30 00:29:19 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:19 2011] Error reading totcts from fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Wed Nov 30 00:29:24 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:24 2011] Using photon index=1.80, rate=0.0111, arf fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src40.arf
[Wed Nov 30 00:29:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:24 2011] Updating source flux to 1.1e-13
[Wed Nov 30 00:29:47 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting