[Thu Nov 24 05:19:59 2011] Detection parameters:
  Position = (314.0, 353.1) = 14 45 32.38 -62 25 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 716.5 +/- 40.2
  Background counts = 179.3
  Rate = 0.01 +/- 0.0006

[Thu Nov 24 05:20:01 2011] Off-axis axis estimate = 4.12'
[Thu Nov 24 10:53:33 2011] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 10:53:33 2011] Initial guess for spatial extent in simple fitting = 8.49"
[Thu Nov 24 10:53:33 2011] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.832
[Thu Nov 24 10:53:33 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 8.49"
[Thu Nov 24 16:42:26 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src29.ximg exists
[Thu Nov 24 16:42:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src29.csv
[Thu Nov 24 16:42:26 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src29_1.ximg exists
[Thu Nov 24 16:42:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src29.csv
[Thu Nov 24 16:42:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 16:42:28 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Thu Nov 24 16:42:28 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Thu Nov 24 16:42:28 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Fri Nov 25 01:01:51 2011] Warning, spatial fit 29 centroid is now closest to src. 3
[Fri Nov 25 01:01:52 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:52 2011] Assessing source extent using major
[Fri Nov 25 01:01:52 2011] Source does appear to be extended
[Fri Nov 25 01:01:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 15:11:47 2011] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 15:11:47 2011] Initial guess for spatial extent in simple fitting = 8.49"
[Fri Nov 25 15:11:47 2011] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.832
[Fri Nov 25 15:11:47 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 8.49"
[Fri Nov 25 23:57:14 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src28.ximg exists
[Fri Nov 25 23:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src28.csv
[Fri Nov 25 23:57:14 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src28_1.ximg exists
[Fri Nov 25 23:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src28.csv
[Fri Nov 25 23:57:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 23:57:17 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Fri Nov 25 23:57:17 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Fri Nov 25 23:57:17 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Sat Nov 26 11:50:58 2011] Source 36 is offset by -1.480953 and 8.202009 pixels which is larger than
2 X fitted extent = 3.401301 x 3.401301, not incorporating fit results
[Sat Nov 26 11:50:58 2011] Spatial fit model total counts = 5931.060000, observed total counts = 5926.000000
[Sat Nov 26 11:50:58 2011] Offset between fit and detection position for source 36 = 2.885914 pixels
[Sat Nov 26 11:50:58 2011] 5102.874000 total counts/ 4247.810000 bgd. counts: snr = 13.119464
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 2.885914 pixels
  Position = (314.2, 356.0) = 14 45 32.30 -62 25 25.2
  Extent = 17.0 (16.9-34.0)", rotation angle = 0
  Source counts = 855.1 +/- 71.4
  Background counts = 4247.8
  Rate = 0.01 +/- 0.001
[Sat Nov 26 11:51:00 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:00 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:00 2011] Source does appear to be extended
[Sat Nov 26 11:51:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 11:51:00 2011] Source is confused with source 5
[Sat Nov 26 11:51:00 2011] Source is confused with source 3
[Mon Nov 28 12:13:43 2011] XMMSAS src. selection expression = ellipse(27283.950580, 30925.575400, 1018.866029, 1018.866029, 0.000000, X, Y)
[Mon Nov 28 12:13:43 2011] Writing source region out to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src36_src.reg
[Mon Nov 28 12:13:43 2011] Extracting stamp from image fullrun_mos1_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (256, 297) - (373, 415)
[Mon Nov 28 12:13:43 2011] XMMSAS bgd. selection expression = annulus(27283.950580, 30925.575400, 1698.110049, 3396.220098, X, Y) && !ellipse(27817.888000, 28935.027600, 1260.344036, 922.752027, 123.079700, X, Y) && !ellipse(26911.278130, 26968.622053, 1918.904055, 749.307212, 112.443825, X, Y) && !ellipse(28393.996000, 31156.598000, 1372.104039, 1372.104039, 0.000000, X, Y) && !ellipse(26935.910000, 27045.420000, 2229.384064, 2229.384064, 0.000000, X, Y) && !ellipse(27795.072000, 30072.842000, 1372.104039, 1372.104039, 0.000000, X, Y) && !ellipse(28200.823212, 30534.039062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28040.151459, 29452.109314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28958.979200, 33467.806000, 1761.520051, 1761.520051, 0.000000, X, Y) && !ellipse(30247.599600, 32247.072000, 1557.144045, 1557.144045, 0.000000, X, Y) && !ellipse(28367.060000, 31783.916000, 1496.424043, 1496.424043, 0.000000, X, Y) && !ellipse(29024.755400, 33009.812000, 1520.696044, 1520.696044, 0.000000, X, Y) && !ellipse(29282.090000, 34152.476800, 1258.896036, 592.713617, -0.000000, X, Y) && !ellipse(30238.942400, 31509.708400, 1131.344033, 1131.344033, 0.000000, X, Y) && !ellipse(30142.012000, 31671.966000, 1587.832046, 1587.832046, 0.000000, X, Y) && !ellipse(30504.082360, 29558.738000, 981.344028, 981.344028, 0.000000, X, Y) && !ellipse(26418.478149, 28662.134552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29050.956000, 34663.310000, 1675.912048, 1110.192032, 269.780000, X, Y) && !ellipse(26416.370000, 29728.690000, 1308.280038, 1308.280038, 0.000000, X, Y) && !ellipse(25773.562260, 27766.212000, 506.828815, 506.828815, 0.000000, X, Y) && !ellipse(30983.436000, 30456.480000, 1506.488043, 1506.488043, 0.000000, X, Y) && !ellipse(30583.358200, 27941.724000, 1367.560039, 1367.560039, 0.000000, X, Y) && !ellipse(30316.086195, 30337.009514, 1442.496042, 766.040689, 71.186769, X, Y) && !ellipse(29972.918000, 35202.716000, 2863.344082, 1277.208037, -0.000000, X, Y) && !ellipse(27226.308600, 32087.822600, 389.080811, 389.080811, 0.000000, X, Y) && !ellipse(31387.538000, 29605.725940, 1127.768032, 1127.768032, 0.000000, X, Y) && !ellipse(29038.951000, 33739.186000, 1313.056038, 1313.056038, 0.000000, X, Y) && !ellipse(30791.157400, 27621.982000, 1378.280040, 1378.280040, 0.000000, X, Y) && !ellipse(30299.384400, 30264.968000, 687.696820, 687.696820, 0.000000, X, Y) && !ellipse(29709.332000, 30083.570000, 1406.016040, 1406.016040, 0.000000, X, Y) && !ellipse(30867.062000, 27315.132000, 1983.720057, 1983.720057, 0.000000, X, Y) && !ellipse(30411.168000, 28292.836000, 1670.064048, 1670.064048, 0.000000, X, Y) && !ellipse(28843.411987, 30336.122559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27771.964294, 33779.111450, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 12:13:43 2011] Writing fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src36.gif
[Mon Nov 28 15:46:21 2011] Mean detx,y = (3180.30, 933.68) 
[Mon Nov 28 15:46:24 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 15:47:02 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 15:47:02 2011] Setting source spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Mon Nov 28 15:47:02 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Wed Nov 30 00:29:19 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:19 2011] Error reading totcts from fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Wed Nov 30 00:29:24 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:24 2011] Using photon index=1.80, rate=0.0114, arf fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src36.arf
[Wed Nov 30 00:29:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:24 2011] Updating source flux to 1.1e-13
[Wed Nov 30 00:29:47 2011] Flag b found in src. 36 procflags, skipping spectral fitting
[Wed Nov 30 00:29:47 2011] Flag c found in src. 36 procflags, skipping spectral fitting