[Thu Nov 24 05:19:59 2011] Detection parameters: Position = (360.3, 353.1) = 14 45 3.38 -62 25 23.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 435.8 +/- 55.6 Background counts = 238.9 Rate = 0.009 +/- 0.001 [Thu Nov 24 05:20:01 2011] Off-axis axis estimate = 5.98' [Thu Nov 24 10:53:33 2011] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting [Thu Nov 24 10:53:33 2011] Initial guess for spatial extent in simple fitting = 9.42" [Thu Nov 24 10:53:33 2011] source mask rpix=2.2, npix_max = 28, mask sum = 26, frac = 0.915 [Thu Nov 24 10:53:33 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 9.42" [Thu Nov 24 16:42:26 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src37.ximg exists [Thu Nov 24 16:42:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src37.csv [Thu Nov 24 16:42:26 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src37_1.ximg exists [Thu Nov 24 16:42:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src37.csv [Thu Nov 24 16:42:26 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src37_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Nov 24 16:42:28 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src37.ximg exists [Thu Nov 24 16:42:28 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists [Thu Nov 24 16:42:28 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly [Fri Nov 25 01:01:51 2011] Spatial fit model total counts = 2679.980000, observed total counts = 2680.000000 [Fri Nov 25 01:01:51 2011] Offset between fit and detection position for source 35 = 4.364064 pixels [Fri Nov 25 01:01:51 2011] 2460.362000 total counts/ 1643.430000 bgd. counts: snr = 20.151636 Spatial fit parameters: Offset between fit and detection position for source 35 = 4.364064 pixels Position = (356.7, 350.6) = 14 45 5.65 -62 25 48.4 Extent = 18.8 (18.8-18.8)", rotation angle = 0 Source counts = 816.9 +/- 49.6 Background counts = 1643.4 Rate = 0.01 +/- 0.0007 [Fri Nov 25 01:01:52 2011] Vigneting correction estimate = 1.000000 [Fri Nov 25 01:01:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Nov 25 01:01:52 2011] Assessing source extent using major axis lower bound [Fri Nov 25 01:01:52 2011] Source does appear to be extended [Fri Nov 25 01:01:52 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Nov 25 01:01:52 2011] Source is confused with source 34 [Fri Nov 25 15:11:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Fri Nov 25 15:11:47 2011] Initial guess for spatial extent in simple fitting = 18.83" [Fri Nov 25 15:11:47 2011] source mask rpix=4.3, npix_max = 93, mask sum = 78, frac = 0.836 [Fri Nov 25 15:11:47 2011] Giving source the simple spatial ID 35 for pass 1, mean size = 18.83" [Fri Nov 25 23:57:14 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src35.ximg exists [Fri Nov 25 23:57:14 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src35_1.ximg exists [Fri Nov 25 23:57:14 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src35 appears to have run properly [Fri Nov 25 23:57:17 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src35.ximg exists [Fri Nov 25 23:57:17 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists [Fri Nov 25 23:57:17 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly [Sat Nov 26 11:50:58 2011] Source 35 is offset by -5.090897 and -1.147862 pixels which is larger than 2 X fitted extent = 1.409977 x 1.409977, not incorporating fit results [Sat Nov 26 11:50:58 2011] Warning, spatial fit 35 centroid is now closest to src. 34 [Sat Nov 26 11:50:59 2011] Source 35 is offset by -4.925425 and 2.017609 pixels which is larger than 2 X fitted extent = 1.951793 x 1.951793, not incorporating fit results [Sat Nov 26 11:51:00 2011] Vigneting correction estimate = 1.000000 [Sat Nov 26 11:51:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Nov 26 11:51:00 2011] Assessing source extent using major axis lower bound [Sat Nov 26 11:51:00 2011] Source does appear to be extended [Sat Nov 26 11:51:00 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Nov 28 12:13:44 2011] XMMSAS src. selection expression = ellipse(30983.436000, 30456.480000, 1129.866033, 1129.866033, 0.000000, X, Y) [Mon Nov 28 12:13:44 2011] Writing source region out to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src35_src.reg [Mon Nov 28 12:13:44 2011] Extracting stamp from image fullrun_mos1_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (292, 286) - (422, 416) [Mon Nov 28 12:13:44 2011] XMMSAS bgd. selection expression = annulus(30983.436000, 30456.480000, 1883.110054, 3766.220108, X, Y) && !ellipse(26653.601020, 25843.457000, 1078.544031, 1078.544031, 0.000000, X, Y) && !ellipse(27817.888000, 28935.027600, 1260.344036, 922.752027, 123.079700, X, Y) && !ellipse(26911.278130, 26968.622053, 1918.904055, 749.307212, 112.443825, X, Y) && !ellipse(28393.996000, 31156.598000, 1372.104039, 1372.104039, 0.000000, X, Y) && !ellipse(26935.910000, 27045.420000, 2229.384064, 2229.384064, 0.000000, X, Y) && !ellipse(27795.072000, 30072.842000, 1372.104039, 1372.104039, 0.000000, X, Y) && !ellipse(26482.841000, 25043.682600, 2187.712063, 841.816024, 111.678000, X, Y) && !ellipse(28200.823212, 30534.039062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28040.151459, 29452.109314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28958.979200, 33467.806000, 1761.520051, 1761.520051, 0.000000, X, Y) && !ellipse(30247.599600, 32247.072000, 1557.144045, 1557.144045, 0.000000, X, Y) && !ellipse(28367.060000, 31783.916000, 1496.424043, 1496.424043, 0.000000, X, Y) && !ellipse(29024.755400, 33009.812000, 1520.696044, 1520.696044, 0.000000, X, Y) && !ellipse(29282.090000, 34152.476800, 1258.896036, 592.713617, -0.000000, X, Y) && !ellipse(30238.942400, 31509.708400, 1131.344033, 1131.344033, 0.000000, X, Y) && !ellipse(30142.012000, 31671.966000, 1587.832046, 1587.832046, 0.000000, X, Y) && !ellipse(30504.082360, 29558.738000, 981.344028, 981.344028, 0.000000, X, Y) && !ellipse(26418.478149, 28662.134552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27283.950580, 30925.575400, 1358.488039, 1358.488039, 0.000000, X, Y) && !ellipse(29050.956000, 34663.310000, 1675.912048, 1110.192032, 269.780000, X, Y) && !ellipse(26416.370000, 29728.690000, 1308.280038, 1308.280038, 0.000000, X, Y) && !ellipse(30583.358200, 27941.724000, 1367.560039, 1367.560039, 0.000000, X, Y) && !ellipse(30316.086195, 30337.009514, 1442.496042, 766.040689, 71.186769, X, Y) && !ellipse(29972.918000, 35202.716000, 2863.344082, 1277.208037, -0.000000, X, Y) && !ellipse(27226.308600, 32087.822600, 389.080811, 389.080811, 0.000000, X, Y) && !ellipse(31387.538000, 29605.725940, 1127.768032, 1127.768032, 0.000000, X, Y) && !ellipse(29038.951000, 33739.186000, 1313.056038, 1313.056038, 0.000000, X, Y) && !ellipse(30791.157400, 27621.982000, 1378.280040, 1378.280040, 0.000000, X, Y) && !ellipse(30299.384400, 30264.968000, 687.696820, 687.696820, 0.000000, X, Y) && !ellipse(31978.003140, 28853.801200, 356.974410, 356.974410, 0.000000, X, Y) && !ellipse(29709.332000, 30083.570000, 1406.016040, 1406.016040, 0.000000, X, Y) && !ellipse(30867.062000, 27315.132000, 1983.720057, 1983.720057, 0.000000, X, Y) && !ellipse(30411.168000, 28292.836000, 1670.064048, 1670.064048, 0.000000, X, Y) && !ellipse(28843.411987, 30336.122559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36067.584000, 34875.856000, 1967.512057, 1967.512057, 0.000000, X, Y) && !ellipse(34806.985055, 26416.280438, 1625.952047, 439.023405, 80.158338, X, Y) && !ellipse(27771.964294, 33779.111450, 870.000000, 870.000000, 0.000000, X, Y) [Mon Nov 28 12:13:44 2011] Writing fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src35.gif [Mon Nov 28 16:10:20 2011] Mean detx,y = (2275.56, 4142.68) [Mon Nov 28 16:10:23 2011] Setting backscal keywords in source and bgd. spectrum [Mon Nov 28 16:11:03 2011] Binned source spectrum to 10 counts/bin [Mon Nov 28 16:11:04 2011] Setting source spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src35_src_b10.pi.gz [Mon Nov 28 16:11:04 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src35_bgd.pi.gz [Wed Nov 30 00:29:19 2011] Updating aperture counts using extracted products [Wed Nov 30 00:29:19 2011] Error reading totcts from fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src35_src_b10.pi.gz [Wed Nov 30 00:29:25 2011] Calculating source flux in energy range 0.30-8.00 [Wed Nov 30 00:29:25 2011] Using photon index=1.80, rate=0.0109, arf fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src35.arf [Wed Nov 30 00:29:25 2011] Assuming count rate is from the 0.30-10.00 bandpass [Wed Nov 30 00:29:25 2011] Updating source flux to 1.1e-13 [Wed Nov 30 00:29:47 2011] Flag b found in src. 35 procflags, skipping spectral fitting [Wed Nov 30 00:29:47 2011] Flag c found in src. 35 procflags, skipping spectral fitting