[Thu Nov 24 05:19:58 2011] Detection parameters:
  Position = (475.3, 415.8) = 14 43 51.64 -62 21 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 276.8 +/- 25.7
  Background counts = 76.1
  Rate = 0.004 +/- 0.0003

[Thu Nov 24 05:20:01 2011] Off-axis axis estimate = 15.39'
[Thu Nov 24 10:53:33 2011] Using EEF radius (= 14.12 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 10:53:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 10:53:33 2011] Initial guess for spatial extent in simple fitting = 14.12"
[Thu Nov 24 10:53:33 2011] source mask rpix=3.2, npix_max = 56, mask sum = 56, frac = 0.997
[Thu Nov 24 10:53:33 2011] Giving source the simple spatial ID 73 for pass 0, mean size = 14.12"
[Thu Nov 24 16:42:27 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src73.ximg exists
[Thu Nov 24 16:42:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src73.csv
[Thu Nov 24 16:42:27 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src73_1.ximg exists
[Thu Nov 24 16:42:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src73.csv
[Thu Nov 24 16:42:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 16:42:29 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Thu Nov 24 16:42:29 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Thu Nov 24 16:42:29 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Fri Nov 25 01:01:52 2011] Warning, spatial fit 73 centroid is now closest to src. 76
[Fri Nov 25 01:01:52 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:52 2011] Assessing source extent using major
[Fri Nov 25 01:01:52 2011] Source does appear to be extended
[Fri Nov 25 01:01:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 15:11:47 2011] Using EEF radius (= 14.12 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 15:11:47 2011] Initial guess for spatial extent in simple fitting = 14.12"
[Fri Nov 25 15:11:47 2011] source mask rpix=3.2, npix_max = 56, mask sum = 56, frac = 0.997
[Fri Nov 25 15:11:47 2011] Giving source the simple spatial ID 69 for pass 1, mean size = 14.12"
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src69.ximg exists
[Fri Nov 25 23:57:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src69.csv
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src69_1.ximg exists
[Fri Nov 25 23:57:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src69.csv
[Fri Nov 25 23:57:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 23:57:18 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Fri Nov 25 23:57:18 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Fri Nov 25 23:57:18 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src69 appears to have run properly
[Sat Nov 26 11:50:59 2011] Spatial fit model total counts = 1531.420000, observed total counts = 1678.000000
[Sat Nov 26 11:50:59 2011] Offset between fit and detection position for source 25 = 0.350818 pixels
[Sat Nov 26 11:50:59 2011] 1100.006000 total counts/ 378.744000 bgd. counts: snr = 37.061259
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.350818 pixels
  Position = (475.1, 415.5) = 14 43 51.76 -62 21 3.6
  Extent = 16.5 (15.2-19.1)", rotation angle = 0
  Source counts = 721.3 +/- 33.2
  Background counts = 378.7
  Rate = 0.01 +/- 0.0004
[Sat Nov 26 11:51:00 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:00 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:00 2011] Source does appear to be extended
[Sat Nov 26 11:51:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 11:51:00 2011] Source is confused with source 76
[Mon Nov 28 12:13:47 2011] XMMSAS src. selection expression = ellipse(41283.652720, 36103.823000, 987.096028, 987.096028, 0.000000, X, Y)
[Mon Nov 28 12:13:47 2011] Writing source region out to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src25_src.reg
[Mon Nov 28 12:13:47 2011] Extracting stamp from image fullrun_mos1_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (418, 359) - (532, 472)
[Mon Nov 28 12:13:47 2011] XMMSAS bgd. selection expression = annulus(41283.652720, 36103.823000, 1645.160047, 3290.320095, X, Y) && !ellipse(37839.900482, 33633.831400, 511.068015, 210.988806, 243.373000, X, Y) && !ellipse(36067.584000, 34875.856000, 1967.512057, 1967.512057, 0.000000, X, Y) && !ellipse(39012.813033, 37683.703434, 803.715555, 311.931288, 64.804307, X, Y) && !ellipse(40863.178314, 35468.195953, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 12:13:47 2011] Writing fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src25.gif
[Mon Nov 28 18:02:07 2011] Mean detx,y = (6338.48, 15123.45) 
[Mon Nov 28 18:02:10 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 18:02:57 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 18:02:57 2011] Setting source spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon Nov 28 18:02:57 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Wed Nov 30 00:29:21 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:22 2011] Error reading totcts from fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed Nov 30 00:29:26 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:26 2011] Using photon index=1.80, rate=0.00965, arf fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src25.arf
[Wed Nov 30 00:29:26 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:26 2011] Updating source flux to 2.2e-13
[Wed Nov 30 00:29:47 2011] Flag c found in src. 25 procflags, skipping spectral fitting