[Thu Nov 24 05:19:58 2011] Detection parameters:
  Position = (345.2, 437.0) = 14 45 12.94 -62 19 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 466.2 +/- 33.5
  Background counts = 135.3
  Rate = 0.01 +/- 0.0008

[Thu Nov 24 05:20:01 2011] Off-axis axis estimate = 10.60'
[Thu Nov 24 10:53:33 2011] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 10:53:33 2011] Initial guess for spatial extent in simple fitting = 11.73"
[Thu Nov 24 10:53:33 2011] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.881
[Thu Nov 24 10:53:33 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 11.73"
[Thu Nov 24 16:42:25 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src25.ximg exists
[Thu Nov 24 16:42:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src25.csv
[Thu Nov 24 16:42:25 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu Nov 24 16:42:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src25.csv
[Thu Nov 24 16:42:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 16:42:28 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu Nov 24 16:42:28 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Nov 24 16:42:28 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Nov 25 01:01:51 2011] Warning, spatial fit 25 centroid is now closest to src. 19
[Fri Nov 25 01:01:51 2011] Source 22 is offset by 2.478614 and -0.086612 pixels which is larger than
2 X fitted extent = 1.298713 x 1.298713, not incorporating fit results
[Fri Nov 25 01:01:52 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:52 2011] Assessing source extent using major
[Fri Nov 25 01:01:52 2011] Source does appear to be extended
[Fri Nov 25 01:01:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:01:52 2011] Source is confused with source 20
[Fri Nov 25 15:11:47 2011] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 15:11:47 2011] Initial guess for spatial extent in simple fitting = 11.73"
[Fri Nov 25 15:11:47 2011] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.881
[Fri Nov 25 15:11:47 2011] Giving source the simple spatial ID 24 for pass 1, mean size = 11.73"
[Fri Nov 25 23:57:14 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src24.ximg exists
[Fri Nov 25 23:57:14 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src24_1.ximg exists
[Fri Nov 25 23:57:14 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src24 appears to have run properly
[Fri Nov 25 23:57:16 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Fri Nov 25 23:57:16 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Fri Nov 25 23:57:16 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Sat Nov 26 11:50:58 2011] Warning, spatial fit 24 centroid is now closest to src. 19
[Sat Nov 26 11:51:00 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:00 2011] Assessing source extent using major
[Sat Nov 26 11:51:00 2011] Source does appear to be extended
[Sat Nov 26 11:51:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 12:13:43 2011] XMMSAS src. selection expression = ellipse(29984.421448, 37972.002747, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 12:13:43 2011] Writing source region out to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src22_src.reg
[Mon Nov 28 12:13:43 2011] Extracting stamp from image fullrun_mos1_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (308, 400) - (383, 475)
[Mon Nov 28 12:13:43 2011] XMMSAS bgd. selection expression = annulus(29984.421448, 37972.002747, 1087.500000, 2175.000000, X, Y) && !ellipse(29485.330000, 39250.838000, 1993.752057, 1993.752057, 0.000000, X, Y) && !ellipse(29565.900400, 35792.028000, 904.464026, 904.464026, 0.000000, X, Y) && !ellipse(29050.956000, 34663.310000, 1675.912048, 1110.192032, 269.780000, X, Y) && !ellipse(29558.586609, 37021.847412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30119.373932, 39188.959320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29647.802000, 36416.280000, 1661.984048, 519.559215, 83.760672, X, Y) && !ellipse(29813.241089, 39622.209656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29972.918000, 35202.716000, 2863.344082, 1277.208037, -0.000000, X, Y) && !ellipse(31035.560000, 39842.320000, 1974.536057, 1974.536057, 0.000000, X, Y) && !ellipse(30471.452000, 40739.564000, 2018.168058, 2018.168058, 0.000000, X, Y) && !ellipse(30569.994000, 40164.564000, 1893.008054, 1893.008054, 0.000000, X, Y) && !ellipse(29201.227631, 35899.792206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30843.034027, 39276.471741, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 12:13:43 2011] Writing fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src22.gif
[Mon Nov 28 15:40:32 2011] Mean detx,y = (9937.09, 4405.17) 
[Mon Nov 28 15:40:35 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 15:40:58 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 15:40:58 2011] Setting source spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon Nov 28 15:40:58 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Mon Nov 28 23:07:07 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Nov 28 23:07:07 2011] rmf not generated due to insufficient counts
[Wed Nov 30 00:29:19 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:19 2011] Error reading totcts from fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Nov 30 00:29:24 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:24 2011] Using photon index=1.80, rate=0.0111, arf fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src22.arf
[Wed Nov 30 00:29:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:24 2011] Updating source flux to 1.8e-13
[Wed Nov 30 00:29:47 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting