[Thu Nov 24 05:19:58 2011] Detection parameters:
  Position = (339.4, 450.9) = 14 45 16.56 -62 18 32.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 655.8 +/- 36.4
  Background counts = 102.9
  Rate = 0.02 +/- 0.001

[Thu Nov 24 05:20:01 2011] Off-axis axis estimate = 11.45'
[Thu Nov 24 10:53:33 2011] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 10:53:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 10:53:33 2011] Initial guess for spatial extent in simple fitting = 12.15"
[Thu Nov 24 10:53:33 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.968
[Thu Nov 24 10:53:33 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 12.15"
[Thu Nov 24 16:42:25 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src16.ximg exists
[Thu Nov 24 16:42:25 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src16_1.ximg exists
[Thu Nov 24 16:42:25 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src16 appears to have run properly
[Thu Nov 24 16:42:28 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Thu Nov 24 16:42:28 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Thu Nov 24 16:42:28 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Fri Nov 25 01:01:51 2011] Warning, spatial fit 16 centroid is now closest to src. 14
[Fri Nov 25 01:01:51 2011] Spatial fit model total counts = 4157.660000, observed total counts = 4153.000000
[Fri Nov 25 01:01:51 2011] Offset between fit and detection position for source 20 = 0.797190 pixels
[Fri Nov 25 01:01:51 2011] Warning, changing simple spatial fit ID from 16 to 60
[Fri Nov 25 01:01:51 2011] 3812.836000 total counts/ 2966.350000 bgd. counts: snr = 15.542060
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.797190 pixels
  Position = (339.5, 451.7) = 14 45 16.54 -62 18 28.8
  Extent = 24.9 (24.9-49.8)", rotation angle = 0
  Source counts = 846.5 +/- 61.7
  Background counts = 2966.3
  Rate = 0.01 +/- 0.0008
[Fri Nov 25 01:01:52 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:52 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 01:01:52 2011] Source does appear to be extended
[Fri Nov 25 01:01:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:01:52 2011] Source is confused with source 21
[Fri Nov 25 01:01:52 2011] Source is confused with source 22
[Fri Nov 25 01:01:52 2011] Source is confused with source 18
[Fri Nov 25 01:01:52 2011] Source is confused with source 16
[Fri Nov 25 01:01:52 2011] Source is confused with source 15
[Fri Nov 25 01:01:52 2011] Source is confused with source 19
[Fri Nov 25 15:11:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 15:11:47 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Nov 25 15:11:47 2011] Initial guess for spatial extent in simple fitting = 24.92"
[Fri Nov 25 15:11:47 2011] source mask rpix=5.7, npix_max = 155, mask sum = 169, frac = 1.089
[Fri Nov 25 15:11:47 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 24.92"
[Fri Nov 25 23:57:14 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src16.ximg exists
[Fri Nov 25 23:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src16.csv
[Fri Nov 25 23:57:14 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri Nov 25 23:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src16.csv
[Fri Nov 25 23:57:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 23:57:16 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri Nov 25 23:57:16 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Nov 25 23:57:16 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Sat Nov 26 11:50:58 2011] Warning, spatial fit 16 centroid is now closest to src. 48
[Sat Nov 26 11:51:00 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:00 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:00 2011] Source does appear to be extended
[Sat Nov 26 11:51:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 12:13:41 2011] XMMSAS src. selection expression = ellipse(29485.330000, 39250.838000, 1495.314043, 1495.314043, 0.000000, X, Y)
[Mon Nov 28 12:13:41 2011] Writing source region out to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src20_src.reg
[Mon Nov 28 12:13:41 2011] Extracting stamp from image fullrun_mos1_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (254, 366) - (425, 538)
[Mon Nov 28 12:13:41 2011] XMMSAS bgd. selection expression = annulus(29485.330000, 39250.838000, 2492.190072, 4984.380143, X, Y) && !ellipse(28958.979200, 33467.806000, 1761.520051, 1761.520051, 0.000000, X, Y) && !ellipse(29024.755400, 33009.812000, 1520.696044, 1520.696044, 0.000000, X, Y) && !ellipse(29282.090000, 34152.476800, 1258.896036, 592.713617, -0.000000, X, Y) && !ellipse(29984.421448, 37972.002747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29565.900400, 35792.028000, 904.464026, 904.464026, 0.000000, X, Y) && !ellipse(29050.956000, 34663.310000, 1675.912048, 1110.192032, 269.780000, X, Y) && !ellipse(29558.586609, 37021.847412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30119.373932, 39188.959320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29647.802000, 36416.280000, 1661.984048, 519.559215, 83.760672, X, Y) && !ellipse(29813.241089, 39622.209656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29972.918000, 35202.716000, 2863.344082, 1277.208037, -0.000000, X, Y) && !ellipse(31035.560000, 39842.320000, 1974.536057, 1974.536057, 0.000000, X, Y) && !ellipse(31114.834686, 41179.243622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29038.951000, 33739.186000, 1313.056038, 1313.056038, 0.000000, X, Y) && !ellipse(30471.452000, 40739.564000, 2018.168058, 2018.168058, 0.000000, X, Y) && !ellipse(30569.994000, 40164.564000, 1893.008054, 1893.008054, 0.000000, X, Y) && !ellipse(29201.227631, 35899.792206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30843.034027, 39276.471741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34016.882599, 37018.995911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36067.584000, 34875.856000, 1967.512057, 1967.512057, 0.000000, X, Y) && !ellipse(25151.678711, 35960.398560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26517.513397, 38276.970032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27771.964294, 33779.111450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30760.430756, 42587.800385, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 12:13:41 2011] Writing fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src20.gif
[Mon Nov 28 14:53:37 2011] Mean detx,y = (11104.32, 4404.30) 
[Mon Nov 28 14:53:40 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 14:54:37 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 14:54:38 2011] Setting source spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Nov 28 14:54:38 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed Nov 30 00:29:18 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:18 2011] Error reading totcts from fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Nov 30 00:29:24 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:24 2011] Using photon index=1.80, rate=0.0113, arf fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src20.arf
[Wed Nov 30 00:29:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:24 2011] Updating source flux to 1.7e-13
[Wed Nov 30 00:29:47 2011] Flag c found in src. 20 procflags, skipping spectral fitting