[Thu Nov 24 05:20:00 2011] Detection parameters:
  Position = (405.9, 252.0) = 14 44 34.55 -62 32 54.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.7 +/- 19.0
  Background counts = 90.0
  Rate = 0.002 +/- 0.0004

[Thu Nov 24 05:20:01 2011] Off-axis axis estimate = 8.49'
[Thu Nov 24 10:53:33 2011] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 10:53:33 2011] Initial guess for spatial extent in simple fitting = 10.67"
[Thu Nov 24 10:53:33 2011] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.032
[Thu Nov 24 10:53:33 2011] Giving source the simple spatial ID 89 for pass 0, mean size = 10.67"
[Thu Nov 24 16:42:27 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src89.ximg exists
[Thu Nov 24 16:42:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src89.csv
[Thu Nov 24 16:42:27 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src89_1.ximg exists
[Thu Nov 24 16:42:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src89.csv
[Thu Nov 24 16:42:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src89_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 16:42:30 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src89.ximg exists
[Thu Nov 24 16:42:30 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src89_1.ximg exists
[Thu Nov 24 16:42:30 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src89 appears to have run properly
[Fri Nov 25 01:01:52 2011] Warning, spatial fit 89 centroid is now closest to src. 78
[Fri Nov 25 01:01:52 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:52 2011] Assessing source extent using major
[Fri Nov 25 01:01:52 2011] Source does appear to be extended
[Fri Nov 25 01:01:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:01:52 2011] Source is confused with source 78
[Fri Nov 25 15:11:47 2011] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 15:11:47 2011] Initial guess for spatial extent in simple fitting = 10.67"
[Fri Nov 25 15:11:47 2011] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.032
[Fri Nov 25 15:11:47 2011] Giving source the simple spatial ID 85 for pass 1, mean size = 10.67"
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src85.ximg exists
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src85_1.ximg exists
[Fri Nov 25 23:57:15 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src85 appears to have run properly
[Fri Nov 25 23:57:18 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src85.ximg exists
[Fri Nov 25 23:57:18 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src85_1.ximg exists
[Fri Nov 25 23:57:18 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src85 appears to have run properly
[Sat Nov 26 11:50:59 2011] Source 116 is offset by -1.337124 and -7.690646 pixels which is larger than
2 X fitted extent = 1.226653 x 1.226653, not incorporating fit results
[Sat Nov 26 11:51:00 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:00 2011] Assessing source extent using major
[Sat Nov 26 11:51:00 2011] Source does appear to be extended
[Sat Nov 26 11:51:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 12:13:48 2011] XMMSAS src. selection expression = ellipse(35264.276428, 21876.463776, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 12:13:48 2011] Writing source region out to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src116_src.reg
[Mon Nov 28 12:13:48 2011] Extracting stamp from image fullrun_mos1_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (368, 215) - (443, 290)
[Mon Nov 28 12:13:48 2011] XMMSAS bgd. selection expression = annulus(35264.276428, 21876.463776, 1087.500000, 2175.000000, X, Y) && !ellipse(35198.067963, 23867.183502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35235.363800, 21038.906000, 3415.008098, 1284.448037, 86.454630, X, Y) && !ellipse(35504.609680, 24296.730072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32548.762000, 23676.146000, 1518.648044, 670.410419, 45.808000, X, Y)
[Mon Nov 28 12:13:48 2011] Writing fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src116.gif
[Mon Nov 28 18:41:24 2011] Mean detx,y = (-6770.42, 7280.64) 
[Mon Nov 28 18:41:27 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 18:41:49 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 18:41:50 2011] Setting source spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src116_src_b10.pi.gz
[Mon Nov 28 18:41:50 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src116_bgd.pi.gz
[Tue Nov 29 04:25:08 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 04:25:08 2011] rmf not generated due to insufficient counts
[Wed Nov 30 00:29:23 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:23 2011] Error reading totcts from fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src116_src_b10.pi.gz
[Wed Nov 30 00:29:27 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:27 2011] Using photon index=1.80, rate=0.0024, arf fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src116.arf
[Wed Nov 30 00:29:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:27 2011] Updating source flux to 3.6e-14
[Wed Nov 30 00:29:47 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting