[Thu Nov 24 05:20:00 2011] Detection parameters:
  Position = (339.7, 284.0) = 14 45 16.24 -62 30 38.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 170.3 +/- 26.8
  Background counts = 215.6
  Rate = 0.003 +/- 0.0004

[Thu Nov 24 05:20:01 2011] Off-axis axis estimate = 3.17'
[Thu Nov 24 10:53:33 2011] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 10:53:33 2011] Initial guess for spatial extent in simple fitting = 8.01"
[Thu Nov 24 10:53:33 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.912
[Thu Nov 24 10:53:33 2011] Giving source the simple spatial ID 87 for pass 0, mean size = 8.01"
[Thu Nov 24 16:42:27 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src87.ximg exists
[Thu Nov 24 16:42:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src87.csv
[Thu Nov 24 16:42:27 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src87_1.ximg exists
[Thu Nov 24 16:42:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src87.csv
[Thu Nov 24 16:42:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 16:42:30 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src87.ximg exists
[Thu Nov 24 16:42:30 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists
[Thu Nov 24 16:42:30 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src87 appears to have run properly
[Fri Nov 25 01:01:52 2011] Warning, spatial fit 87 centroid is now closest to src. 69
[Fri Nov 25 01:01:52 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:52 2011] Assessing source extent using major
[Fri Nov 25 01:01:52 2011] Source does appear to be extended
[Fri Nov 25 01:01:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:01:52 2011] Source is confused with source 69
[Fri Nov 25 15:11:47 2011] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 15:11:47 2011] Initial guess for spatial extent in simple fitting = 8.01"
[Fri Nov 25 15:11:47 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.912
[Fri Nov 25 15:11:47 2011] Giving source the simple spatial ID 83 for pass 1, mean size = 8.01"
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src83.ximg exists
[Fri Nov 25 23:57:15 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src83_1.ximg exists
[Fri Nov 25 23:57:15 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src83 appears to have run properly
[Fri Nov 25 23:57:18 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Fri Nov 25 23:57:18 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Fri Nov 25 23:57:18 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src83 appears to have run properly
[Sat Nov 26 11:50:58 2011] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 107 at 11.772083 pixels away
[Sat Nov 26 11:50:59 2011] Warning, spatial fit 83 centroid is now closest to src. 69
[Sat Nov 26 11:51:00 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:00 2011] Assessing source extent using major
[Sat Nov 26 11:51:00 2011] Source does appear to be extended
[Sat Nov 26 11:51:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 12:13:48 2011] XMMSAS src. selection expression = ellipse(29503.600952, 24659.619476, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 12:13:48 2011] Writing source region out to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src107_src.reg
[Mon Nov 28 12:13:48 2011] Extracting stamp from image fullrun_mos1_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (302, 247) - (377, 322)
[Mon Nov 28 12:13:48 2011] XMMSAS bgd. selection expression = annulus(29503.600952, 24659.619476, 1087.500000, 2175.000000, X, Y) && !ellipse(26653.601020, 25843.457000, 1078.544031, 1078.544031, 0.000000, X, Y) && !ellipse(26911.278130, 26968.622053, 1918.904055, 749.307212, 112.443825, X, Y) && !ellipse(26935.910000, 27045.420000, 2229.384064, 2229.384064, 0.000000, X, Y) && !ellipse(26018.658900, 23534.669800, 1918.904055, 859.680025, 108.012200, X, Y) && !ellipse(26705.344000, 25575.540000, 966.504028, 434.852013, 90.000000, X, Y) && !ellipse(26482.841000, 25043.682600, 2187.712063, 841.816024, 111.678000, X, Y) && !ellipse(28783.717400, 25385.089600, 664.022419, 664.022419, 0.000000, X, Y) && !ellipse(27554.346000, 22075.898000, 1282.776037, 1282.776037, 0.000000, X, Y) && !ellipse(30583.358200, 27941.724000, 1367.560039, 1367.560039, 0.000000, X, Y) && !ellipse(27892.794000, 25077.520600, 835.144024, 835.144024, 0.000000, X, Y) && !ellipse(29248.876400, 22948.429800, 982.056028, 982.056028, 0.000000, X, Y) && !ellipse(27179.983032, 24914.717346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29791.080000, 24143.280000, 1282.008037, 1282.008037, 0.000000, X, Y) && !ellipse(30791.157400, 27621.982000, 1378.280040, 1378.280040, 0.000000, X, Y) && !ellipse(30867.062000, 27315.132000, 1983.720057, 1983.720057, 0.000000, X, Y) && !ellipse(28239.902588, 22249.105103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30411.168000, 28292.836000, 1670.064048, 1670.064048, 0.000000, X, Y) && !ellipse(28622.465759, 21845.664108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28116.340179, 25506.111847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32548.762000, 23676.146000, 1518.648044, 670.410419, 45.808000, X, Y)
[Mon Nov 28 12:13:48 2011] Writing fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src107.gif
[Mon Nov 28 18:40:03 2011] Mean detx,y = (-3162.93, 1988.08) 
[Mon Nov 28 18:40:05 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 18:40:24 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 18:40:24 2011] Setting source spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src107_src_b10.pi.gz
[Mon Nov 28 18:40:24 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src107_bgd.pi.gz
[Tue Nov 29 04:24:57 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 04:24:57 2011] rmf not generated due to insufficient counts
[Wed Nov 30 00:29:23 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:23 2011] Error reading totcts from fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src107_src_b10.pi.gz
[Wed Nov 30 00:29:27 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:27 2011] Using photon index=1.80, rate=0.00253, arf fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src107.arf
[Wed Nov 30 00:29:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:27 2011] Updating source flux to 2.7e-14
[Wed Nov 30 00:29:47 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting