[Thu Nov 24 05:19:58 2011] Detection parameters:
  Position = (305.9, 290.0) = 14 45 37.45 -62 30 12.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1722.3 +/- 57.6
  Background counts = 162.5
  Rate = 0.02 +/- 0.0008

[Thu Nov 24 05:20:01 2011] Off-axis axis estimate = 0.82'
[Thu Nov 24 10:53:33 2011] Using EEF radius (= 6.84 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 10:53:33 2011] Initial guess for spatial extent in simple fitting = 6.84"
[Thu Nov 24 10:53:33 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.932
[Thu Nov 24 10:53:33 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 6.84"
[Thu Nov 24 16:42:25 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src7.ximg exists
[Thu Nov 24 16:42:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src7.csv
[Thu Nov 24 16:42:25 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Nov 24 16:42:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src7.csv
[Thu Nov 24 16:42:25 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 16:42:27 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Nov 24 16:42:27 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Nov 24 16:42:27 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Nov 25 01:01:51 2011] Warning, spatial fit 7 centroid is now closest to src. 9
[Fri Nov 25 01:01:51 2011] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.437983 pixels away
[Fri Nov 25 01:01:51 2011] Spatial fit model total counts = 5880.680000, observed total counts = 5867.000000
[Fri Nov 25 01:01:51 2011] Offset between fit and detection position for source 10 = 2.326005 pixels
[Fri Nov 25 01:01:51 2011] Warning, changing simple spatial fit ID from 7 to 54
[Fri Nov 25 01:01:51 2011] 5418.820000 total counts/ 4337.820000 bgd. counts: snr = 16.413074
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 2.326005 pixels
  Position = (306.5, 292.3) = 14 45 37.10 -62 30 2.4
  Extent = 10.5 (9.7-11.5)", rotation angle = 0
  Source counts = 1081.0 +/- 73.6
  Background counts = 4337.8
  Rate = 0.01 +/- 0.001
[Fri Nov 25 01:01:52 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:52 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 01:01:52 2011] Source does appear to be extended
[Fri Nov 25 01:01:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:01:52 2011] Source is confused with source 1
[Fri Nov 25 15:11:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 15:11:47 2011] Initial guess for spatial extent in simple fitting = 10.54"
[Fri Nov 25 15:11:47 2011] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.878
[Fri Nov 25 15:11:47 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 10.54"
[Fri Nov 25 23:57:14 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src7.ximg exists
[Fri Nov 25 23:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src7.csv
[Fri Nov 25 23:57:14 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Nov 25 23:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src7.csv
[Fri Nov 25 23:57:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 23:57:16 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Nov 25 23:57:16 2011] fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Nov 25 23:57:16 2011] Fit fullrun_mos1_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sat Nov 26 11:50:58 2011] Warning, spatial fit 7 centroid is now closest to src. 85
[Sat Nov 26 11:50:58 2011] Spatial fit model total counts = 5868.550000, observed total counts = 5867.000000
[Sat Nov 26 11:50:58 2011] Offset between fit and detection position for source 10 = 2.472803 pixels
[Sat Nov 26 11:50:58 2011] Warning, changing simple spatial fit ID from 7 to 52
[Sat Nov 26 11:50:58 2011] 4458.191000 total counts/ 3820.820000 bgd. counts: snr = 10.311314
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 2.472803 pixels
  Position = (307.5, 294.5) = 14 45 36.45 -62 29 52.7
  Extent = 12.1 (8.0-14.2)" x 5.4 (4.6-6.5)", rotation angle = 90 (83-90) degrees
  Source counts = 637.4 +/- 66.8
  Background counts = 3820.8
  Rate = 0.009 +/- 0.0009
[Sat Nov 26 11:51:00 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:00 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:00 2011] Source does appear to be extended
[Sat Nov 26 11:51:00 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.23
[Mon Nov 28 12:13:40 2011] XMMSAS src. selection expression = ellipse(26705.344000, 25575.540000, 724.878021, 326.139009, 90.000000, X, Y)
[Mon Nov 28 12:13:40 2011] Writing source region out to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src10_src.reg
[Mon Nov 28 12:13:40 2011] Extracting stamp from image fullrun_mos1_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (266, 253) - (349, 336)
[Mon Nov 28 12:13:40 2011] XMMSAS bgd. selection expression = annulus(26705.344000, 25575.540000, 1208.130035, 2416.260070, X, Y) && !ellipse(26653.601020, 25843.457000, 1078.544031, 1078.544031, 0.000000, X, Y) && !ellipse(27817.888000, 28935.027600, 1260.344036, 922.752027, 123.079700, X, Y) && !ellipse(26911.278130, 26968.622053, 1918.904055, 749.307212, 112.443825, X, Y) && !ellipse(26935.910000, 27045.420000, 2229.384064, 2229.384064, 0.000000, X, Y) && !ellipse(26018.658900, 23534.669800, 1918.904055, 859.680025, 108.012200, X, Y) && !ellipse(25916.975000, 22648.059520, 1251.512036, 901.048026, 269.647000, X, Y) && !ellipse(26482.841000, 25043.682600, 2187.712063, 841.816024, 111.678000, X, Y) && !ellipse(28783.717400, 25385.089600, 664.022419, 664.022419, 0.000000, X, Y) && !ellipse(26418.478149, 28662.134552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25773.562260, 27766.212000, 506.828815, 506.828815, 0.000000, X, Y) && !ellipse(27554.346000, 22075.898000, 1282.776037, 1282.776037, 0.000000, X, Y) && !ellipse(27892.794000, 25077.520600, 835.144024, 835.144024, 0.000000, X, Y) && !ellipse(29248.876400, 22948.429800, 982.056028, 982.056028, 0.000000, X, Y) && !ellipse(25079.173600, 25498.798000, 789.829623, 789.829623, 0.000000, X, Y) && !ellipse(27179.983032, 24914.717346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29791.080000, 24143.280000, 1282.008037, 1282.008037, 0.000000, X, Y) && !ellipse(30867.062000, 27315.132000, 1983.720057, 1983.720057, 0.000000, X, Y) && !ellipse(30411.168000, 28292.836000, 1670.064048, 1670.064048, 0.000000, X, Y) && !ellipse(28116.340179, 25506.111847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29503.600952, 24659.619476, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 12:13:40 2011] Writing fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src10.gif
[Mon Nov 28 13:37:18 2011] Mean detx,y = (-1809.11, -655.16) 
[Mon Nov 28 13:37:22 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 13:37:41 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 13:37:42 2011] Setting source spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Nov 28 13:37:42 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Nov 30 00:29:18 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:18 2011] Error reading totcts from fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Nov 30 00:29:24 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:24 2011] Using photon index=1.80, rate=0.00852, arf fullrun_mos1_xmm0504810201_pi300-10000_pass1_cl_src10.arf
[Wed Nov 30 00:29:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:24 2011] Updating source flux to 1.2e-13
[Wed Nov 30 00:29:47 2011] Flag c found in src. 10 procflags, skipping spectral fitting