[Fri Dec  2 20:28:33 2011] Detection parameters:
  Position = (432.5, 278.0) = 14 45 1.20 -62 20 54.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 172.0 +/- 33.2
  Background counts = 470.2
  Rate = 0.002 +/- 0.0003

[Fri Dec  2 20:28:34 2011] Off-axis axis estimate = 9.83'
[Fri Dec  2 20:39:35 2011] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Fri Dec  2 20:39:35 2011] Initial guess for spatial extent in simple fitting = 11.34"
[Fri Dec  2 20:39:35 2011] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.087
[Fri Dec  2 20:39:35 2011] Giving source the simple spatial ID 93 for pass 0, mean size = 11.34"
[Sat Dec  3 05:48:14 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src93.ximg exists
[Sat Dec  3 05:48:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src93.csv
[Sat Dec  3 05:48:14 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src93_1.ximg exists
[Sat Dec  3 05:48:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src93.csv
[Sat Dec  3 05:48:14 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src93_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 05:48:16 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src93.ximg exists
[Sat Dec  3 05:48:16 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists
[Sat Dec  3 05:48:16 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src93 appears to have run properly
[Sat Dec  3 16:57:31 2011] Warning, spatial fit 93 centroid is now closest to src. 92
[Sat Dec  3 16:57:31 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:31 2011] Assessing source extent using major
[Sat Dec  3 16:57:31 2011] Source does appear to be extended
[Sat Dec  3 16:57:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:58:19 2011] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 16:58:19 2011] Initial guess for spatial extent in simple fitting = 11.34"
[Sat Dec  3 16:58:19 2011] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.087
[Sat Dec  3 16:58:19 2011] Giving source the simple spatial ID 88 for pass 1, mean size = 11.34"
[Sun Dec  4 01:59:09 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src88.ximg exists
[Sun Dec  4 01:59:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src88.csv
[Sun Dec  4 01:59:09 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src88_1.ximg exists
[Sun Dec  4 01:59:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src88.csv
[Sun Dec  4 01:59:09 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src88_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 01:59:10 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src88.ximg exists
[Sun Dec  4 01:59:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src88.csv
[Sun Dec  4 01:59:11 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src88_1.ximg exists
[Sun Dec  4 01:59:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src88.csv
[Sun Dec  4 01:59:11 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src88_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 15:56:36 2011] Warning: source 88 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 97 at 10.563446 pixels away
[Sun Dec  4 15:56:36 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:56:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:56:36 2011] Assessing source extent using major
[Sun Dec  4 15:56:36 2011] Source does appear to be extended
[Sun Dec  4 15:56:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 15:57:27 2011] XMMSAS src. selection expression = ellipse(37579.037170, 24135.713165, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec  4 15:57:27 2011] Writing source region out to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src97_src.reg
[Sun Dec  4 15:57:27 2011] Extracting stamp from image fullrun_pn_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (395, 240) - (470, 315)
[Sun Dec  4 15:57:27 2011] XMMSAS bgd. selection expression = annulus(37579.037170, 24135.713165, 1087.500000, 2175.000000, X, Y) && !ellipse(36081.535800, 20022.482200, 5444.784157, 2148.878462, 83.314290, X, Y) && !ellipse(34165.868800, 18821.448600, 6138.264177, 6138.264177, 0.000000, X, Y) && !ellipse(34766.612600, 21116.398000, 1276.424037, 1276.424037, 0.000000, X, Y) && !ellipse(34878.957600, 21324.868200, 4281.672123, 4281.672123, 0.000000, X, Y) && !ellipse(37467.319000, 28851.168000, 4809.576138, 4809.576138, 0.000000, X, Y) && !ellipse(35408.379600, 24590.896000, 1189.624034, 1189.624034, 0.000000, X, Y) && !ellipse(35502.121400, 24003.112600, 730.281621, 730.281621, 0.000000, X, Y) && !ellipse(35746.574000, 23294.022000, 813.848023, 813.848023, 0.000000, X, Y) && !ellipse(35641.906200, 22828.205840, 814.032023, 814.032023, 0.000000, X, Y) && !ellipse(35118.278000, 26233.004000, 762.512822, 762.512822, 0.000000, X, Y) && !ellipse(36190.210000, 25713.367200, 922.456027, 922.456027, 0.000000, X, Y) && !ellipse(35547.331600, 23950.242400, 730.704821, 730.704821, 0.000000, X, Y) && !ellipse(35845.844000, 22182.664000, 523.680815, 523.680815, 0.000000, X, Y) && !ellipse(36435.562000, 25630.120000, 1044.112030, 1044.112030, 0.000000, X, Y) && !ellipse(34628.328600, 23869.164000, 1614.512046, 842.928024, 81.643000, X, Y) && !ellipse(37176.810852, 25007.675232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39945.488678, 24748.427551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34388.716000, 24365.628000, 1505.312043, 1505.312043, 0.000000, X, Y) && !ellipse(36238.536774, 23796.283600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36564.492000, 23316.450000, 1288.736037, 1288.736037, 0.000000, X, Y) && !ellipse(36828.380800, 22411.738000, 1796.688052, 1796.688052, 0.000000, X, Y) && !ellipse(36439.559455, 22643.011974, 1340.040039, 167.572807, 90.000000, X, Y) && !ellipse(35986.016000, 21361.212000, 1844.912053, 1032.232030, 74.267000, X, Y)
[Sun Dec  4 15:57:27 2011] Writing fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src97.gif
[Sun Dec  4 18:24:39 2011] Mean detx,y = (10176.43, 4929.68) 
[Sun Dec  4 18:24:40 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 18:24:55 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 18:24:55 2011] Setting source spectrum file to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src97_src_b10.pi.gz
[Sun Dec  4 18:24:55 2011] Setting bgd. spectrum file to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src97_bgd.pi.gz
[Sun Dec  4 21:09:07 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Dec  4 21:09:07 2011] rmf not generated due to insufficient counts
[Mon Dec  5 06:51:23 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:23 2011] Error reading totcts from fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src97_src_b10.pi.gz
[Mon Dec  5 06:51:25 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:25 2011] Using photon index=1.80, rate=0.00153, arf fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src97.arf
[Mon Dec  5 06:51:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:25 2011] Updating source flux to 7.1e-15
[Mon Dec  5 07:08:35 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting