[Fri Dec  2 20:28:29 2011] Detection parameters:
  Position = (374.1, 179.0) = 14 45 37.48 -62 28 2.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3589.1 +/- 78.2
  Background counts = 318.3
  Rate = 0.03 +/- 0.0007

[Fri Dec  2 20:28:34 2011] Off-axis axis estimate = 10.25'
[Fri Dec  2 20:39:35 2011] Using EEF radius (= 11.55 ")to estimate initial spatial extent for simple fitting
[Fri Dec  2 20:39:35 2011] Initial guess for spatial extent in simple fitting = 11.55"
[Fri Dec  2 20:39:35 2011] source mask rpix=2.7, npix_max = 39, mask sum = 33, frac = 0.828
[Fri Dec  2 20:39:35 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 11.55"
[Sat Dec  3 05:48:12 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src8.ximg exists
[Sat Dec  3 05:48:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src8.csv
[Sat Dec  3 05:48:12 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src8_1.ximg exists
[Sat Dec  3 05:48:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src8.csv
[Sat Dec  3 05:48:12 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 05:48:14 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sat Dec  3 05:48:14 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Dec  3 05:48:14 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sat Dec  3 16:57:30 2011] Spatial fit model total counts = 16881.700000, observed total counts = 16820.000000
[Sat Dec  3 16:57:30 2011] Offset between fit and detection position for source 8 = 0.544920 pixels
[Sat Dec  3 16:57:30 2011] 17342.441000 total counts/ 16568.300000 bgd. counts: snr = 6.014245
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.544920 pixels
  Position = (373.6, 179.2) = 14 45 37.80 -62 28 1.7
  Extent = 5.9 (5.5-6.6)", rotation angle = 0
  Source counts = 774.1 +/- 131.7
  Background counts = 16568.3
  Rate = 0.007 +/- 0.001
[Sat Dec  3 16:57:31 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:31 2011] Assessing source extent using major axis lower bound
[Sat Dec  3 16:57:31 2011] Source does appear to be extended
[Sat Dec  3 16:57:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:57:31 2011] Source is confused with source 1
[Sat Dec  3 16:58:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec  3 16:58:19 2011] Initial guess for spatial extent in simple fitting = 5.87"
[Sat Dec  3 16:58:19 2011] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.876
[Sat Dec  3 16:58:19 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 5.87"
[Sun Dec  4 01:59:08 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src8.ximg exists
[Sun Dec  4 01:59:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src8.csv
[Sun Dec  4 01:59:08 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Dec  4 01:59:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src8.csv
[Sun Dec  4 01:59:08 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 01:59:09 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Dec  4 01:59:09 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Dec  4 01:59:09 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sun Dec  4 15:56:36 2011] Spatial fit model total counts = 14821.900000, observed total counts = 14970.000000
[Sun Dec  4 15:56:36 2011] Offset between fit and detection position for source 8 = 0.174349 pixels
[Sun Dec  4 15:56:36 2011] 15490.679000 total counts/ 14709.100000 bgd. counts: snr = 6.444361
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.174349 pixels
  Position = (373.8, 179.1) = 14 45 37.70 -62 28 2.0
  Extent = 6.0 (5.3-6.9)", rotation angle = 0
  Source counts = 781.6 +/- 124.5
  Background counts = 14709.1
  Rate = 0.007 +/- 0.001
[Sun Dec  4 15:56:36 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:56:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:56:36 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:56:36 2011] Source does appear to be extended
[Sun Dec  4 15:56:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 15:57:22 2011] XMMSAS src. selection expression = ellipse(32471.614000, 15536.398200, 361.080010, 361.080010, 0.000000, X, Y)
[Sun Dec  4 15:57:22 2011] Writing source region out to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src8_src.reg
[Sun Dec  4 15:57:22 2011] Extracting stamp from image fullrun_pn_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (353, 158) - (395, 200)
[Sun Dec  4 15:57:22 2011] XMMSAS bgd. selection expression = annulus(32471.614000, 15536.398200, 601.800017, 1203.600035, X, Y) && !ellipse(32861.485760, 14857.972000, 4855.632140, 4855.632140, 0.000000, X, Y) && !ellipse(36081.535800, 20022.482200, 5444.784157, 2148.878462, 83.314290, X, Y) && !ellipse(32539.336000, 14171.508000, 399.272011, 399.272011, 0.000000, X, Y) && !ellipse(33729.260620, 16582.733612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34165.868800, 18821.448600, 6138.264177, 6138.264177, 0.000000, X, Y) && !ellipse(32540.691400, 17833.982000, 1362.344039, 1362.344039, 0.000000, X, Y) && !ellipse(32282.348365, 17002.691246, 1707.083490, 745.890074, 261.575743, X, Y) && !ellipse(31336.330894, 13938.045314, 1516.299116, 1019.374281, 359.975817, X, Y) && !ellipse(31899.274000, 13780.484000, 5789.016167, 5789.016167, 0.000000, X, Y) && !ellipse(32411.489929, 17441.445755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31556.743073, 15253.278137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31379.940800, 14122.550000, 1575.888045, 1575.888045, 0.000000, X, Y) && !ellipse(33842.144501, 15097.267288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29969.404000, 13909.857600, 1868.608054, 1868.608054, 0.000000, X, Y) && !ellipse(34516.500702, 15698.280960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34437.408000, 14641.972000, 1303.272038, 1303.272038, 0.000000, X, Y)
[Sun Dec  4 15:57:22 2011] Writing fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src8.gif
[Sun Dec  4 16:23:05 2011] Mean detx,y = (3939.12, 12717.24) 
[Sun Dec  4 16:23:07 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 16:23:20 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 16:23:21 2011] Setting source spectrum file to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Dec  4 16:23:21 2011] Setting bgd. spectrum file to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon Dec  5 06:51:22 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:22 2011] Error reading totcts from fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Dec  5 06:51:24 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:24 2011] Using photon index=1.80, rate=0.00746, arf fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src8.arf
[Mon Dec  5 06:51:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:24 2011] Updating source flux to 4.8e-14
[Mon Dec  5 07:08:35 2011] Flag c found in src. 8 procflags, skipping spectral fitting