[Fri Dec  2 20:28:29 2011] Detection parameters:
  Position = (401.1, 238.0) = 14 45 20.75 -62 23 45.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4361.4 +/- 90.9
  Background counts = 426.8
  Rate = 0.04 +/- 0.0008

[Fri Dec  2 20:28:34 2011] Off-axis axis estimate = 8.63'
[Fri Dec  2 20:39:35 2011] Using EEF radius (= 10.75 ")to estimate initial spatial extent for simple fitting
[Fri Dec  2 20:39:35 2011] Initial guess for spatial extent in simple fitting = 10.75"
[Fri Dec  2 20:39:35 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.020
[Fri Dec  2 20:39:35 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 10.75"
[Sat Dec  3 05:48:12 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src6.ximg exists
[Sat Dec  3 05:48:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src6.csv
[Sat Dec  3 05:48:12 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Dec  3 05:48:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src6.csv
[Sat Dec  3 05:48:12 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 05:48:14 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Dec  3 05:48:14 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Dec  3 05:48:14 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Dec  3 16:57:30 2011] Warning, spatial fit 6 centroid is now closest to src. 45
[Sat Dec  3 16:57:31 2011] Source 6 is offset by 3.698723 and -3.534820 pixels which is larger than
2 X fitted extent = 3.383145 x 3.383145, not incorporating fit results
[Sat Dec  3 16:57:31 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:31 2011] Assessing source extent using major
[Sat Dec  3 16:57:31 2011] Source does appear to be extended
[Sat Dec  3 16:57:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:57:31 2011] Source is confused with source 9
[Sat Dec  3 16:58:19 2011] Using EEF radius (= 10.75 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 16:58:19 2011] Initial guess for spatial extent in simple fitting = 10.75"
[Sat Dec  3 16:58:19 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.020
[Sat Dec  3 16:58:19 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 10.75"
[Sun Dec  4 01:59:08 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src6.ximg exists
[Sun Dec  4 01:59:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src6.csv
[Sun Dec  4 01:59:08 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Dec  4 01:59:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src6.csv
[Sun Dec  4 01:59:08 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 01:59:09 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Dec  4 01:59:09 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Dec  4 01:59:09 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Dec  4 15:56:36 2011] Spatial fit model total counts = 24326.300000, observed total counts = 24261.000000
[Sun Dec  4 15:56:36 2011] Offset between fit and detection position for source 6 = 5.055481 pixels
[Sun Dec  4 15:56:36 2011] 16712.323000 total counts/ 737.323000 bgd. counts: snr = 588.317783
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 5.055481 pixels
  Position = (401.5, 243.1) = 14 45 20.50 -62 23 23.4
  Extent = 21.5 (21.5-21.5)", rotation angle = 0
  Source counts = 15975.0 +/- 129.3
  Background counts = 737.3
  Rate = 0.2 +/- 0.001
[Sun Dec  4 15:56:36 2011] Spatial fit model total counts = 67874.400000, observed total counts = 67938.000000
[Sun Dec  4 15:56:36 2011] Offset between fit and detection position for source 6 = 1.319215 pixels
[Sun Dec  4 15:56:36 2011] Warning, changing simple spatial fit ID from 6 to 9
[Sun Dec  4 15:56:36 2011] 63627.780000 total counts/ 54536.000000 bgd. counts: snr = 38.932050
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.319215 pixels
  Position = (400.2, 243.3) = 14 45 21.32 -62 23 22.5
  Extent = 16.0 (15.4-16.5)", rotation angle = 0
  Source counts = 9091.8 +/- 252.2
  Background counts = 54536.0
  Rate = 0.09 +/- 0.002
[Sun Dec  4 15:56:36 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:56:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:56:36 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:56:36 2011] Source does appear to be extended
[Sun Dec  4 15:56:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 15:57:21 2011] Counts = 9091.780000, rescaling region sizes by 2.000000
[Sun Dec  4 15:57:21 2011] XMMSAS src. selection expression = ellipse(34766.612600, 21116.398000, 1914.636055, 1914.636055, 0.000000, X, Y)
[Sun Dec  4 15:57:21 2011] Writing source region out to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src6_src.reg
[Sun Dec  4 15:57:21 2011] Extracting stamp from image fullrun_pn_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (290, 133) - (510, 353)
[Sun Dec  4 15:57:22 2011] XMMSAS bgd. selection expression = annulus(34766.612600, 21116.398000, 6382.120184, 12764.240367, X, Y) && !ellipse(32861.485760, 14857.972000, 4855.632140, 4855.632140, 0.000000, X, Y) && !ellipse(36081.535800, 20022.482200, 5444.784157, 2148.878462, 83.314290, X, Y) && !ellipse(32539.336000, 14171.508000, 399.272011, 399.272011, 0.000000, X, Y) && !ellipse(33729.260620, 16582.733612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34165.868800, 18821.448600, 6138.264177, 6138.264177, 0.000000, X, Y) && !ellipse(34660.910400, 19966.094528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32471.614000, 15536.398200, 481.440014, 481.440014, 0.000000, X, Y) && !ellipse(34878.957600, 21324.868200, 4281.672123, 4281.672123, 0.000000, X, Y) && !ellipse(38441.766000, 29815.054000, 1128.920032, 1128.920032, 0.000000, X, Y) && !ellipse(32540.691400, 17833.982000, 1362.344039, 1362.344039, 0.000000, X, Y) && !ellipse(36379.724000, 17575.550000, 427.233612, 427.233612, 0.000000, X, Y) && !ellipse(37467.319000, 28851.168000, 4809.576138, 4809.576138, 0.000000, X, Y) && !ellipse(39892.038000, 31153.626000, 1229.160035, 1229.160035, 0.000000, X, Y) && !ellipse(38440.864800, 31008.420000, 795.620823, 795.620823, 0.000000, X, Y) && !ellipse(39015.214203, 30047.839478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37605.508000, 28369.846000, 1794.832052, 1794.832052, 0.000000, X, Y) && !ellipse(35408.379600, 24590.896000, 1189.624034, 1189.624034, 0.000000, X, Y) && !ellipse(35502.121400, 24003.112600, 730.281621, 730.281621, 0.000000, X, Y) && !ellipse(35746.574000, 23294.022000, 813.848023, 813.848023, 0.000000, X, Y) && !ellipse(35641.906200, 22828.205840, 814.032023, 814.032023, 0.000000, X, Y) && !ellipse(32282.348365, 17002.691246, 1707.083490, 745.890074, 261.575743, X, Y) && !ellipse(36263.778000, 18758.225920, 1070.064031, 1070.064031, 0.000000, X, Y) && !ellipse(31336.330894, 13938.045314, 1516.299116, 1019.374281, 359.975817, X, Y) && !ellipse(35994.101501, 27530.861084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35118.278000, 26233.004000, 762.512822, 762.512822, 0.000000, X, Y) && !ellipse(36190.210000, 25713.367200, 922.456027, 922.456027, 0.000000, X, Y) && !ellipse(31899.274000, 13780.484000, 5789.016167, 5789.016167, 0.000000, X, Y) && !ellipse(35547.331600, 23950.242400, 730.704821, 730.704821, 0.000000, X, Y) && !ellipse(35845.844000, 22182.664000, 523.680815, 523.680815, 0.000000, X, Y) && !ellipse(36622.398254, 19520.848770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32411.489929, 17441.445755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36849.086000, 15642.600000, 936.296027, 936.296027, 0.000000, X, Y) && !ellipse(31556.743073, 15253.278137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31379.940800, 14122.550000, 1575.888045, 1575.888045, 0.000000, X, Y) && !ellipse(39900.873566, 31524.441986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36435.562000, 25630.120000, 1044.112030, 1044.112030, 0.000000, X, Y) && !ellipse(37735.766000, 17086.058400, 1574.208045, 1574.208045, 0.000000, X, Y) && !ellipse(28739.760000, 13999.688760, 2400.936069, 2400.936069, 0.000000, X, Y) && !ellipse(39282.557660, 32389.306000, 1743.232050, 1743.232050, 0.000000, X, Y) && !ellipse(30966.997345, 23789.428314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34628.328600, 23869.164000, 1614.512046, 842.928024, 81.643000, X, Y) && !ellipse(33679.494400, 21398.206000, 1148.744033, 1148.744033, 0.000000, X, Y) && !ellipse(33618.484833, 21003.013565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33233.855400, 20229.511560, 1673.448048, 587.771217, 81.980270, X, Y) && !ellipse(32748.876042, 18680.586000, 1673.448048, 404.724012, 82.215190, X, Y) && !ellipse(35551.622284, 18212.044113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35923.076813, 16479.729095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36012.994690, 15951.821655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33842.144501, 15097.267288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29465.251400, 34529.034400, 752.143222, 752.143222, 0.000000, X, Y) && !ellipse(39328.456000, 33823.812000, 2072.832060, 2072.832060, 0.000000, X, Y) && !ellipse(37775.994000, 33768.160200, 1954.088056, 1954.088056, 0.000000, X, Y) && !ellipse(37146.421387, 31693.755859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36506.502000, 32472.874000, 1870.584054, 1870.584054, 0.000000, X, Y) && !ellipse(29969.404000, 13909.857600, 1868.608054, 1868.608054, 0.000000, X, Y) && !ellipse(37907.966000, 30706.520000, 1661.728048, 1661.728048, 0.000000, X, Y) && !ellipse(31491.403800, 30037.287200, 356.961610, 356.961610, 0.000000, X, Y) && !ellipse(27161.514648, 28070.490479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29571.883219, 27618.464112, 691.103953, 452.708750, 85.426173, X, Y) && !ellipse(27123.677200, 27550.379600, 358.821610, 358.821610, 0.000000, X, Y) && !ellipse(23337.165763, 27110.172678, 538.334361, 405.062267, 67.602970, X, Y) && !ellipse(33810.892938, 26872.709273, 512.358801, 403.863567, 61.268364, X, Y) && !ellipse(32432.493443, 26025.782248, 640.111077, 478.675991, 77.219207, X, Y) && !ellipse(28406.672880, 25903.693000, 425.298412, 304.756809, 14.594400, X, Y) && !ellipse(29171.413180, 25573.961400, 417.721612, 417.721612, 0.000000, X, Y) && !ellipse(23764.021600, 25680.394000, 1172.928034, 1172.928034, 0.000000, X, Y) && !ellipse(30890.744904, 25245.972076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37176.810852, 25007.675232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34327.564000, 25481.728200, 861.752025, 861.752025, 0.000000, X, Y) && !ellipse(34199.065399, 24830.183868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39945.488678, 24748.427551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34388.716000, 24365.628000, 1505.312043, 1505.312043, 0.000000, X, Y) && !ellipse(37579.037170, 24135.713165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36238.536774, 23796.283600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36564.492000, 23316.450000, 1288.736037, 1288.736037, 0.000000, X, Y) && !ellipse(36828.380800, 22411.738000, 1796.688052, 1796.688052, 0.000000, X, Y) && !ellipse(36439.559455, 22643.011974, 1340.040039, 167.572807, 90.000000, X, Y) && !ellipse(31887.569800, 22029.185000, 1500.920043, 1500.920043, 0.000000, X, Y) && !ellipse(23954.087921, 22258.158752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35986.016000, 21361.212000, 1844.912053, 1032.232030, 74.267000, X, Y) && !ellipse(36617.364319, 20753.318680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36701.674774, 20330.652618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37163.331268, 18478.172302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35467.059601, 17793.138901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35685.297699, 17342.864517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37705.413910, 16677.920395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35117.280731, 16576.612442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24012.341919, 16160.318451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35261.669189, 15787.037262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34516.500702, 15698.280960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34833.288177, 15349.781815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34893.013062, 14643.348877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35675.184692, 15096.506622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22889.532684, 14516.944260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34437.408000, 14641.972000, 1303.272038, 1303.272038, 0.000000, X, Y)
[Sun Dec  4 15:57:22 2011] Writing fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src6.gif
[Sun Dec  4 16:19:19 2011] Mean detx,y = (7022.50, 7727.32) 
[Sun Dec  4 16:19:24 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 16:21:25 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 16:21:26 2011] Setting source spectrum file to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Dec  4 16:21:26 2011] Setting bgd. spectrum file to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Dec  5 06:51:22 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:22 2011] Error reading totcts from fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Dec  5 06:51:24 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:24 2011] Using photon index=1.80, rate=0.0868, arf fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src6.arf
[Mon Dec  5 06:51:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:24 2011] Updating source flux to 3e-13
[Mon Dec  5 07:08:35 2011] Flag b found in src. 6 procflags, skipping spectral fitting
[Mon Dec  5 07:08:35 2011] Flag c found in src. 6 procflags, skipping spectral fitting