[Fri Dec  2 20:28:31 2011] Detection parameters:
  Position = (414.5, 183.9) = 14 45 12.18 -62 27 39.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 538.8 +/- 39.0
  Background counts = 397.8
  Rate = 0.005 +/- 0.0003

[Fri Dec  2 20:28:34 2011] Off-axis axis estimate = 11.82'
[Fri Dec  2 20:39:35 2011] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Fri Dec  2 20:39:35 2011] Initial guess for spatial extent in simple fitting = 12.34"
[Fri Dec  2 20:39:35 2011] source mask rpix=2.8, npix_max = 44, mask sum = 32, frac = 0.719
[Fri Dec  2 20:39:35 2011] Giving source the simple spatial ID 49 for pass 0, mean size = 12.34"
[Sat Dec  3 05:48:13 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src49.ximg exists
[Sat Dec  3 05:48:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src49.csv
[Sat Dec  3 05:48:13 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src49_1.ximg exists
[Sat Dec  3 05:48:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src49.csv
[Sat Dec  3 05:48:13 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 05:48:15 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Sat Dec  3 05:48:15 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Sat Dec  3 05:48:15 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Sat Dec  3 16:57:31 2011] Warning, spatial fit 49 centroid is now closest to src. 35
[Sat Dec  3 16:57:31 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:31 2011] Assessing source extent using major
[Sat Dec  3 16:57:31 2011] Source does appear to be extended
[Sat Dec  3 16:57:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:57:31 2011] Source is confused with source 50
[Sat Dec  3 16:58:19 2011] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 16:58:19 2011] Initial guess for spatial extent in simple fitting = 12.34"
[Sat Dec  3 16:58:19 2011] source mask rpix=2.8, npix_max = 44, mask sum = 32, frac = 0.719
[Sat Dec  3 16:58:19 2011] Giving source the simple spatial ID 47 for pass 1, mean size = 12.34"
[Sun Dec  4 01:59:09 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src47.ximg exists
[Sun Dec  4 01:59:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src47.csv
[Sun Dec  4 01:59:09 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src47_1.ximg exists
[Sun Dec  4 01:59:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src47.csv
[Sun Dec  4 01:59:09 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 01:59:10 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Sun Dec  4 01:59:10 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Sun Dec  4 01:59:10 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Sun Dec  4 15:56:36 2011] Warning, spatial fit 47 centroid is now closest to src. 35
[Sun Dec  4 15:56:36 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:56:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:56:36 2011] Assessing source extent using major
[Sun Dec  4 15:56:36 2011] Source does appear to be extended
[Sun Dec  4 15:56:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 15:57:26 2011] XMMSAS src. selection expression = ellipse(36012.994690, 15951.821655, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec  4 15:57:26 2011] Writing source region out to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src51_src.reg
[Sun Dec  4 15:57:26 2011] Extracting stamp from image fullrun_pn_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (377, 146) - (452, 221)
[Sun Dec  4 15:57:26 2011] XMMSAS bgd. selection expression = annulus(36012.994690, 15951.821655, 1087.500000, 2175.000000, X, Y) && !ellipse(32861.485760, 14857.972000, 4855.632140, 4855.632140, 0.000000, X, Y) && !ellipse(36081.535800, 20022.482200, 5444.784157, 2148.878462, 83.314290, X, Y) && !ellipse(33729.260620, 16582.733612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34165.868800, 18821.448600, 6138.264177, 6138.264177, 0.000000, X, Y) && !ellipse(34878.957600, 21324.868200, 4281.672123, 4281.672123, 0.000000, X, Y) && !ellipse(32540.691400, 17833.982000, 1362.344039, 1362.344039, 0.000000, X, Y) && !ellipse(36379.724000, 17575.550000, 427.233612, 427.233612, 0.000000, X, Y) && !ellipse(32282.348365, 17002.691246, 1707.083490, 745.890074, 261.575743, X, Y) && !ellipse(36263.778000, 18758.225920, 1070.064031, 1070.064031, 0.000000, X, Y) && !ellipse(31899.274000, 13780.484000, 5789.016167, 5789.016167, 0.000000, X, Y) && !ellipse(36849.086000, 15642.600000, 936.296027, 936.296027, 0.000000, X, Y) && !ellipse(37735.766000, 17086.058400, 1574.208045, 1574.208045, 0.000000, X, Y) && !ellipse(32748.876042, 18680.586000, 1673.448048, 404.724012, 82.215190, X, Y) && !ellipse(35551.622284, 18212.044113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35923.076813, 16479.729095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33842.144501, 15097.267288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37163.331268, 18478.172302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35467.059601, 17793.138901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35685.297699, 17342.864517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37705.413910, 16677.920395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35117.280731, 16576.612442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35261.669189, 15787.037262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34516.500702, 15698.280960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34833.288177, 15349.781815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34893.013062, 14643.348877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35675.184692, 15096.506622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34437.408000, 14641.972000, 1303.272038, 1303.272038, 0.000000, X, Y)
[Sun Dec  4 15:57:26 2011] Writing fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src51.gif
[Sun Dec  4 17:54:39 2011] Mean detx,y = (7442.48, 12804.58) 
[Sun Dec  4 17:54:41 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 17:54:52 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 17:54:52 2011] Setting source spectrum file to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Sun Dec  4 17:54:52 2011] Setting bgd. spectrum file to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Sun Dec  4 20:21:07 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Dec  4 20:21:07 2011] rmf not generated due to insufficient counts
[Mon Dec  5 06:51:23 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:23 2011] Error reading totcts from fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Mon Dec  5 06:51:24 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:24 2011] Using photon index=1.80, rate=0.00479, arf fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src51.arf
[Mon Dec  5 06:51:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:24 2011] Updating source flux to 3e-14
[Mon Dec  5 07:08:35 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting