[Fri Dec  2 20:28:30 2011] Detection parameters:
  Position = (331.3, 170.3) = 14 46 4.33 -62 28 40.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 992.2 +/- 43.9
  Background counts = 212.6
  Rate = 0.009 +/- 0.0004

[Fri Dec  2 20:28:34 2011] Off-axis axis estimate = 9.59'
[Fri Dec  2 20:39:35 2011] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting
[Fri Dec  2 20:39:35 2011] Initial guess for spatial extent in simple fitting = 11.22"
[Fri Dec  2 20:39:35 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.949
[Fri Dec  2 20:39:35 2011] Giving source the simple spatial ID 40 for pass 0, mean size = 11.22"
[Sat Dec  3 05:48:13 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src40.ximg exists
[Sat Dec  3 05:48:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src40.csv
[Sat Dec  3 05:48:13 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src40_1.ximg exists
[Sat Dec  3 05:48:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src40.csv
[Sat Dec  3 05:48:13 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 05:48:15 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Sat Dec  3 05:48:15 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Sat Dec  3 05:48:15 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Sat Dec  3 16:57:31 2011] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 14.471061 pixels away
[Sat Dec  3 16:57:31 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:31 2011] Assessing source extent using major
[Sat Dec  3 16:57:31 2011] Source does appear to be extended
[Sat Dec  3 16:57:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:58:19 2011] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 16:58:19 2011] Initial guess for spatial extent in simple fitting = 11.22"
[Sat Dec  3 16:58:19 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.949
[Sat Dec  3 16:58:19 2011] Giving source the simple spatial ID 38 for pass 1, mean size = 11.22"
[Sun Dec  4 01:59:09 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src38.ximg exists
[Sun Dec  4 01:59:09 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src38_1.ximg exists
[Sun Dec  4 01:59:09 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src38 appears to have run properly
[Sun Dec  4 01:59:10 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Sun Dec  4 01:59:10 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Sun Dec  4 01:59:10 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Sun Dec  4 15:56:36 2011] Warning, spatial fit 38 centroid is now closest to src. 73
[Sun Dec  4 15:56:36 2011] Spatial fit model total counts = 9999.730000, observed total counts = 9778.000000
[Sun Dec  4 15:56:36 2011] Offset between fit and detection position for source 41 = 8.845283 pixels
[Sun Dec  4 15:56:36 2011] Warning, changing simple spatial fit ID from 38 to 66
[Sun Dec  4 15:56:36 2011] 8666.741000 total counts/ 7798.870000 bgd. counts: snr = 9.827416
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 8.845283 pixels
  Position = (330.9, 161.5) = 14 46 4.60 -62 29 19.2
  Extent = 30.0 (29.9-33.0)", rotation angle = 0
  Source counts = 867.9 +/- 93.1
  Background counts = 7798.9
  Rate = 0.008 +/- 0.0009
[Sun Dec  4 15:56:36 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:56:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:56:36 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:56:36 2011] Source does appear to be extended
[Sun Dec  4 15:56:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 15:56:36 2011] Source is confused with source 73
[Sun Dec  4 15:57:25 2011] XMMSAS src. selection expression = ellipse(28739.760000, 13999.688760, 1800.702052, 1800.702052, 0.000000, X, Y)
[Sun Dec  4 15:57:25 2011] Writing source region out to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src41_src.reg
[Sun Dec  4 15:57:25 2011] Extracting stamp from image fullrun_pn_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (227, 58) - (434, 265)
[Sun Dec  4 15:57:25 2011] XMMSAS bgd. selection expression = annulus(28739.760000, 13999.688760, 3001.170086, 6002.340173, X, Y) && !ellipse(32861.485760, 14857.972000, 4855.632140, 4855.632140, 0.000000, X, Y) && !ellipse(36081.535800, 20022.482200, 5444.784157, 2148.878462, 83.314290, X, Y) && !ellipse(32539.336000, 14171.508000, 399.272011, 399.272011, 0.000000, X, Y) && !ellipse(33729.260620, 16582.733612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34165.868800, 18821.448600, 6138.264177, 6138.264177, 0.000000, X, Y) && !ellipse(34766.612600, 21116.398000, 1276.424037, 1276.424037, 0.000000, X, Y) && !ellipse(34660.910400, 19966.094528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32471.614000, 15536.398200, 481.440014, 481.440014, 0.000000, X, Y) && !ellipse(34878.957600, 21324.868200, 4281.672123, 4281.672123, 0.000000, X, Y) && !ellipse(32540.691400, 17833.982000, 1362.344039, 1362.344039, 0.000000, X, Y) && !ellipse(32282.348365, 17002.691246, 1707.083490, 745.890074, 261.575743, X, Y) && !ellipse(31336.330894, 13938.045314, 1516.299116, 1019.374281, 359.975817, X, Y) && !ellipse(31899.274000, 13780.484000, 5789.016167, 5789.016167, 0.000000, X, Y) && !ellipse(32411.489929, 17441.445755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31556.743073, 15253.278137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31379.940800, 14122.550000, 1575.888045, 1575.888045, 0.000000, X, Y) && !ellipse(33233.855400, 20229.511560, 1673.448048, 587.771217, 81.980270, X, Y) && !ellipse(32748.876042, 18680.586000, 1673.448048, 404.724012, 82.215190, X, Y) && !ellipse(35551.622284, 18212.044113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33842.144501, 15097.267288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29969.404000, 13909.857600, 1868.608054, 1868.608054, 0.000000, X, Y) && !ellipse(35986.016000, 21361.212000, 1844.912053, 1032.232030, 74.267000, X, Y) && !ellipse(35467.059601, 17793.138901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35117.280731, 16576.612442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24012.341919, 16160.318451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35261.669189, 15787.037262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34516.500702, 15698.280960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34833.288177, 15349.781815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34893.013062, 14643.348877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22889.532684, 14516.944260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34437.408000, 14641.972000, 1303.272038, 1303.272038, 0.000000, X, Y)
[Sun Dec  4 15:57:25 2011] Writing fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src41.gif
[Sun Dec  4 17:33:26 2011] Mean detx,y = (97.95, 13281.87) 
[Sun Dec  4 17:33:28 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 17:33:58 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 17:33:58 2011] Setting source spectrum file to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Sun Dec  4 17:33:58 2011] Setting bgd. spectrum file to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Mon Dec  5 06:51:23 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:23 2011] Error reading totcts from fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Mon Dec  5 06:51:24 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:24 2011] Using photon index=1.80, rate=0.00828, arf fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src41.arf
[Mon Dec  5 06:51:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:24 2011] Updating source flux to 4.1e-14
[Mon Dec  5 07:08:35 2011] Flag c found in src. 41 procflags, skipping spectral fitting