[Fri Dec  2 20:28:30 2011] Detection parameters:
  Position = (415.7, 288.1) = 14 45 11.75 -62 20 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1215.1 +/- 50.6
  Background counts = 447.9
  Rate = 0.01 +/- 0.0004

[Fri Dec  2 20:28:34 2011] Off-axis axis estimate = 8.53'
[Fri Dec  2 20:39:35 2011] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Fri Dec  2 20:39:35 2011] Initial guess for spatial extent in simple fitting = 10.69"
[Fri Dec  2 20:39:35 2011] source mask rpix=2.5, npix_max = 35, mask sum = 23, frac = 0.657
[Fri Dec  2 20:39:35 2011] Giving source the simple spatial ID 38 for pass 0, mean size = 10.69"
[Sat Dec  3 05:48:13 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src38.ximg exists
[Sat Dec  3 05:48:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src38.csv
[Sat Dec  3 05:48:13 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src38_1.ximg exists
[Sat Dec  3 05:48:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src38.csv
[Sat Dec  3 05:48:13 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 05:48:15 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sat Dec  3 05:48:15 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sat Dec  3 05:48:15 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Sat Dec  3 16:57:31 2011] Spatial fit model total counts = 11180.600000, observed total counts = 11186.000000
[Sat Dec  3 16:57:31 2011] Offset between fit and detection position for source 39 = 7.852424 pixels
[Sat Dec  3 16:57:31 2011] 9375.110000 total counts/ 4551.430000 bgd. counts: snr = 71.499755
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 7.852424 pixels
  Position = (418.5, 295.4) = 14 45 10.00 -62 19 35.5
  Extent = 16.4 (15.7-17.3)", rotation angle = 0
  Source counts = 4823.7 +/- 96.8
  Background counts = 4551.4
  Rate = 0.05 +/- 0.0009
[Sat Dec  3 16:57:31 2011] Spatial fit model total counts = 7204.800000, observed total counts = 7200.000000
[Sat Dec  3 16:57:31 2011] Offset between fit and detection position for source 39 = 0.873257 pixels
[Sat Dec  3 16:57:31 2011] Warning, changing simple spatial fit ID from 38 to 88
[Sat Dec  3 16:57:31 2011] 7056.919000 total counts/ 6748.220000 bgd. counts: snr = 3.757860
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.873257 pixels
  Position = (419.4, 295.2) = 14 45 9.47 -62 19 36.5
  Extent = 13.1 (6.4-22.3)", rotation angle = 0
  Source counts = 308.7 +/- 84.0
  Background counts = 6748.2
  Rate = 0.003 +/- 0.0008
[Sat Dec  3 16:57:31 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:31 2011] Assessing source extent using major axis lower bound
[Sat Dec  3 16:57:31 2011] Source does appear to be extended
[Sat Dec  3 16:57:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:57:31 2011] Source is confused with source 29
[Sat Dec  3 16:58:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec  3 16:58:19 2011] Initial guess for spatial extent in simple fitting = 13.05"
[Sat Dec  3 16:58:19 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 1.000
[Sat Dec  3 16:58:19 2011] Giving source the simple spatial ID 36 for pass 1, mean size = 13.05"
[Sun Dec  4 01:59:08 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src36.ximg exists
[Sun Dec  4 01:59:08 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src36_1.ximg exists
[Sun Dec  4 01:59:09 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src36 appears to have run properly
[Sun Dec  4 01:59:10 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Sun Dec  4 01:59:10 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Sun Dec  4 01:59:10 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Sun Dec  4 15:56:36 2011] Warning, spatial fit 36 centroid is now closest to src. 26
[Sun Dec  4 15:56:36 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:56:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:56:36 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:56:36 2011] Source does appear to be extended
[Sun Dec  4 15:56:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 15:57:25 2011] XMMSAS src. selection expression = ellipse(36435.562000, 25630.120000, 783.084023, 783.084023, 0.000000, X, Y)
[Sun Dec  4 15:57:25 2011] Writing source region out to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src39_src.reg
[Sun Dec  4 15:57:25 2011] Extracting stamp from image fullrun_pn_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (374, 250) - (464, 340)
[Sun Dec  4 15:57:25 2011] XMMSAS bgd. selection expression = annulus(36435.562000, 25630.120000, 1305.140038, 2610.280075, X, Y) && !ellipse(36081.535800, 20022.482200, 5444.784157, 2148.878462, 83.314290, X, Y) && !ellipse(34165.868800, 18821.448600, 6138.264177, 6138.264177, 0.000000, X, Y) && !ellipse(34878.957600, 21324.868200, 4281.672123, 4281.672123, 0.000000, X, Y) && !ellipse(37467.319000, 28851.168000, 4809.576138, 4809.576138, 0.000000, X, Y) && !ellipse(37605.508000, 28369.846000, 1794.832052, 1794.832052, 0.000000, X, Y) && !ellipse(35408.379600, 24590.896000, 1189.624034, 1189.624034, 0.000000, X, Y) && !ellipse(35502.121400, 24003.112600, 730.281621, 730.281621, 0.000000, X, Y) && !ellipse(35746.574000, 23294.022000, 813.848023, 813.848023, 0.000000, X, Y) && !ellipse(35641.906200, 22828.205840, 814.032023, 814.032023, 0.000000, X, Y) && !ellipse(35994.101501, 27530.861084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35118.278000, 26233.004000, 762.512822, 762.512822, 0.000000, X, Y) && !ellipse(36190.210000, 25713.367200, 922.456027, 922.456027, 0.000000, X, Y) && !ellipse(35547.331600, 23950.242400, 730.704821, 730.704821, 0.000000, X, Y) && !ellipse(34628.328600, 23869.164000, 1614.512046, 842.928024, 81.643000, X, Y) && !ellipse(33810.892938, 26872.709273, 512.358801, 403.863567, 61.268364, X, Y) && !ellipse(37176.810852, 25007.675232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34327.564000, 25481.728200, 861.752025, 861.752025, 0.000000, X, Y) && !ellipse(34199.065399, 24830.183868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34388.716000, 24365.628000, 1505.312043, 1505.312043, 0.000000, X, Y) && !ellipse(37579.037170, 24135.713165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36238.536774, 23796.283600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36564.492000, 23316.450000, 1288.736037, 1288.736037, 0.000000, X, Y) && !ellipse(36828.380800, 22411.738000, 1796.688052, 1796.688052, 0.000000, X, Y) && !ellipse(36439.559455, 22643.011974, 1340.040039, 167.572807, 90.000000, X, Y) && !ellipse(35986.016000, 21361.212000, 1844.912053, 1032.232030, 74.267000, X, Y)
[Sun Dec  4 15:57:25 2011] Writing fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src39.gif
[Sun Dec  4 17:30:28 2011] Mean detx,y = (9271.63, 3231.46) 
[Sun Dec  4 17:30:30 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 17:30:45 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 17:30:45 2011] Setting source spectrum file to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun Dec  4 17:30:45 2011] Setting bgd. spectrum file to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Mon Dec  5 06:51:23 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:23 2011] Error reading totcts from fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Mon Dec  5 06:51:24 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:24 2011] Using photon index=1.80, rate=0.00295, arf fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src39.arf
[Mon Dec  5 06:51:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:24 2011] Updating source flux to 1.2e-14
[Mon Dec  5 07:08:35 2011] Flag c found in src. 39 procflags, skipping spectral fitting