[Fri Dec 2 20:28:30 2011] Detection parameters: Position = (410.1, 254.0) = 14 45 15.12 -62 22 35.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1875.5 +/- 61.4 Background counts = 440.9 Rate = 0.02 +/- 0.0005 [Fri Dec 2 20:28:34 2011] Off-axis axis estimate = 8.71' [Fri Dec 2 20:39:35 2011] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting [Fri Dec 2 20:39:35 2011] Initial guess for spatial extent in simple fitting = 10.79" [Fri Dec 2 20:39:35 2011] source mask rpix=2.5, npix_max = 35, mask sum = 23, frac = 0.648 [Fri Dec 2 20:39:35 2011] Giving source the simple spatial ID 32 for pass 0, mean size = 10.79" [Sat Dec 3 05:48:12 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src32.ximg exists [Sat Dec 3 05:48:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src32.csv [Sat Dec 3 05:48:12 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src32_1.ximg exists [Sat Dec 3 05:48:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src32.csv [Sat Dec 3 05:48:12 2011] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src32_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Dec 3 05:48:15 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists [Sat Dec 3 05:48:15 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists [Sat Dec 3 05:48:15 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly [Sat Dec 3 16:57:31 2011] Source 32 is offset by -1.330148 and -5.785837 pixels which is larger than 2 X fitted extent = 5.714437 x 5.714437, not incorporating fit results [Sat Dec 3 16:57:31 2011] Vigneting correction estimate = 1.000000 [Sat Dec 3 16:57:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Dec 3 16:57:31 2011] Assessing source extent using major [Sat Dec 3 16:57:31 2011] Source does appear to be extended [Sat Dec 3 16:57:31 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Dec 3 16:57:31 2011] Source is confused with source 9 [Sat Dec 3 16:57:31 2011] Source is confused with source 104 [Sat Dec 3 16:58:19 2011] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting [Sat Dec 3 16:58:19 2011] Initial guess for spatial extent in simple fitting = 10.79" [Sat Dec 3 16:58:19 2011] source mask rpix=2.5, npix_max = 35, mask sum = 23, frac = 0.648 [Sat Dec 3 16:58:19 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 10.79" [Sun Dec 4 01:59:08 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src30.ximg exists [Sun Dec 4 01:59:08 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src30_1.ximg exists [Sun Dec 4 01:59:08 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src30 appears to have run properly [Sun Dec 4 01:59:10 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists [Sun Dec 4 01:59:10 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists [Sun Dec 4 01:59:10 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly [Sun Dec 4 15:56:36 2011] Warning, spatial fit 30 centroid is now closest to src. 109 [Sun Dec 4 15:56:36 2011] Spatial fit model total counts = 10176.000000, observed total counts = 10176.000000 [Sun Dec 4 15:56:36 2011] Offset between fit and detection position for source 32 = 2.874596 pixels [Sun Dec 4 15:56:36 2011] Warning, changing simple spatial fit ID from 30 to 93 [Sun Dec 4 15:56:36 2011] 7056.608000 total counts/ 6353.400000 bgd. counts: snr = 8.822277 Spatial fit parameters: Offset between fit and detection position for source 32 = 2.874596 pixels Position = (412.6, 255.5) = 14 45 13.59 -62 22 29.0 Extent = 6.5 (5.7-8.7)", rotation angle = 0 Source counts = 703.2 +/- 84.0 Background counts = 6353.4 Rate = 0.007 +/- 0.0008 [Sun Dec 4 15:56:36 2011] Vigneting correction estimate = 1.000000 [Sun Dec 4 15:56:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Dec 4 15:56:36 2011] Assessing source extent using major axis lower bound [Sun Dec 4 15:56:36 2011] Source does appear to be extended [Sun Dec 4 15:56:36 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Dec 4 15:57:24 2011] XMMSAS src. selection expression = ellipse(35845.844000, 22182.664000, 392.760611, 392.760611, 0.000000, X, Y) [Sun Dec 4 15:57:24 2011] Writing source region out to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src32_src.reg [Sun Dec 4 15:57:24 2011] Extracting stamp from image fullrun_pn_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (390, 233) - (435, 278) [Sun Dec 4 15:57:24 2011] XMMSAS bgd. selection expression = annulus(35845.844000, 22182.664000, 654.601019, 1309.202038, X, Y) && !ellipse(36081.535800, 20022.482200, 5444.784157, 2148.878462, 83.314290, X, Y) && !ellipse(34165.868800, 18821.448600, 6138.264177, 6138.264177, 0.000000, X, Y) && !ellipse(34766.612600, 21116.398000, 1276.424037, 1276.424037, 0.000000, X, Y) && !ellipse(34878.957600, 21324.868200, 4281.672123, 4281.672123, 0.000000, X, Y) && !ellipse(35408.379600, 24590.896000, 1189.624034, 1189.624034, 0.000000, X, Y) && !ellipse(35502.121400, 24003.112600, 730.281621, 730.281621, 0.000000, X, Y) && !ellipse(35746.574000, 23294.022000, 813.848023, 813.848023, 0.000000, X, Y) && !ellipse(35641.906200, 22828.205840, 814.032023, 814.032023, 0.000000, X, Y) && !ellipse(35547.331600, 23950.242400, 730.704821, 730.704821, 0.000000, X, Y) && !ellipse(34628.328600, 23869.164000, 1614.512046, 842.928024, 81.643000, X, Y) && !ellipse(33679.494400, 21398.206000, 1148.744033, 1148.744033, 0.000000, X, Y) && !ellipse(33233.855400, 20229.511560, 1673.448048, 587.771217, 81.980270, X, Y) && !ellipse(34388.716000, 24365.628000, 1505.312043, 1505.312043, 0.000000, X, Y) && !ellipse(37579.037170, 24135.713165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36238.536774, 23796.283600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36564.492000, 23316.450000, 1288.736037, 1288.736037, 0.000000, X, Y) && !ellipse(36828.380800, 22411.738000, 1796.688052, 1796.688052, 0.000000, X, Y) && !ellipse(36439.559455, 22643.011974, 1340.040039, 167.572807, 90.000000, X, Y) && !ellipse(35986.016000, 21361.212000, 1844.912053, 1032.232030, 74.267000, X, Y) && !ellipse(36617.364319, 20753.318680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36701.674774, 20330.652618, 870.000000, 870.000000, 0.000000, X, Y) [Sun Dec 4 15:57:24 2011] Writing fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src32.gif [Sun Dec 4 17:21:24 2011] Mean detx,y = (8123.09, 6621.17) [Sun Dec 4 17:21:26 2011] Setting backscal keywords in source and bgd. spectrum [Sun Dec 4 17:21:38 2011] Binned source spectrum to 10 counts/bin [Sun Dec 4 17:21:38 2011] Setting source spectrum file to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src32_src_b10.pi.gz [Sun Dec 4 17:21:38 2011] Setting bgd. spectrum file to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src32_bgd.pi.gz [Mon Dec 5 06:51:23 2011] Updating aperture counts using extracted products [Mon Dec 5 06:51:23 2011] Error reading totcts from fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src32_src_b10.pi.gz [Mon Dec 5 06:51:24 2011] Calculating source flux in energy range 0.30-8.00 [Mon Dec 5 06:51:24 2011] Using photon index=1.80, rate=0.00671, arf fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src32.arf [Mon Dec 5 06:51:24 2011] Assuming count rate is from the 0.30-10.00 bandpass [Mon Dec 5 06:51:24 2011] Updating source flux to 3.5e-14 [Mon Dec 5 07:08:35 2011] Flag b found in src. 32 procflags, skipping spectral fitting [Mon Dec 5 07:08:35 2011] Flag c found in src. 32 procflags, skipping spectral fitting