[Fri Dec  2 20:28:29 2011] Detection parameters:
  Position = (375.2, 163.4) = 14 45 36.76 -62 29 11.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4018.6 +/- 79.7
  Background counts = 281.7
  Rate = 0.04 +/- 0.0007

[Fri Dec  2 20:28:34 2011] Off-axis axis estimate = 11.26'
[Fri Dec  2 20:39:35 2011] Using EEF radius (= 12.06 ")to estimate initial spatial extent for simple fitting
[Fri Dec  2 20:39:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec  2 20:39:35 2011] Initial guess for spatial extent in simple fitting = 12.06"
[Fri Dec  2 20:39:35 2011] source mask rpix=2.8, npix_max = 42, mask sum = 34, frac = 0.794
[Fri Dec  2 20:39:35 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 12.06"
[Sat Dec  3 05:48:12 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src3.ximg exists
[Sat Dec  3 05:48:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src3.csv
[Sat Dec  3 05:48:12 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Dec  3 05:48:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src3.csv
[Sat Dec  3 05:48:12 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 05:48:14 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Dec  3 05:48:14 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Dec  3 05:48:14 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Dec  3 16:57:30 2011] Warning, spatial fit 3 centroid is now closest to src. 30
[Sat Dec  3 16:57:31 2011] Source 3 is offset by -1.264868 and -5.968542 pixels which is larger than
2 X fitted extent = 1.434395 x 1.434395, not incorporating fit results
[Sat Dec  3 16:57:31 2011] Source 3 is offset by 1.710397 and -3.532588 pixels which is larger than
2 X fitted extent = 1.441830 x 1.441830, not incorporating fit results
[Sat Dec  3 16:57:31 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:31 2011] Assessing source extent using major
[Sat Dec  3 16:57:31 2011] Source does appear to be extended
[Sat Dec  3 16:57:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:57:31 2011] Source is confused with source 1
[Sat Dec  3 16:58:19 2011] Using EEF radius (= 12.06 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 16:58:19 2011] Initial guess for spatial extent in simple fitting = 12.06"
[Sat Dec  3 16:58:19 2011] source mask rpix=2.8, npix_max = 42, mask sum = 34, frac = 0.794
[Sat Dec  3 16:58:19 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 12.06"
[Sun Dec  4 01:59:08 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src3.ximg exists
[Sun Dec  4 01:59:08 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Dec  4 01:59:08 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src3 appears to have run properly
[Sun Dec  4 01:59:09 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Dec  4 01:59:09 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Dec  4 01:59:09 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Dec  4 15:56:36 2011] Warning, spatial fit 3 centroid is now closest to src. 30
[Sun Dec  4 15:56:36 2011] Spatial fit model total counts = 6484.710000, observed total counts = 7126.000000
[Sun Dec  4 15:56:36 2011] Offset between fit and detection position for source 3 = 0.673323 pixels
[Sun Dec  4 15:56:36 2011] Warning, changing simple spatial fit ID from 3 to 24
[Sun Dec  4 15:56:36 2011] 3927.938000 total counts/ 3758.910000 bgd. counts: snr = 2.756942
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.673323 pixels
  Position = (374.6, 163.4) = 14 45 37.19 -62 29 10.2
  Extent = 5.0 (4.9-5.1)", rotation angle = 0
  Source counts = 169.0 +/- 62.7
  Background counts = 3758.9
  Rate = 0.002 +/- 0.0006
[Sun Dec  4 15:56:36 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:56:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:56:36 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:56:36 2011] Source does appear to be extended
[Sun Dec  4 15:56:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 15:57:21 2011] XMMSAS src. selection expression = ellipse(32539.336000, 14171.508000, 299.454009, 299.454009, 0.000000, X, Y)
[Sun Dec  4 15:57:21 2011] Writing source region out to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src3_src.reg
[Sun Dec  4 15:57:21 2011] Extracting stamp from image fullrun_pn_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (357, 146) - (392, 181)
[Sun Dec  4 15:57:21 2011] XMMSAS bgd. selection expression = annulus(32539.336000, 14171.508000, 499.090014, 998.180029, X, Y) && !ellipse(32861.485760, 14857.972000, 4855.632140, 4855.632140, 0.000000, X, Y) && !ellipse(36081.535800, 20022.482200, 5444.784157, 2148.878462, 83.314290, X, Y) && !ellipse(34165.868800, 18821.448600, 6138.264177, 6138.264177, 0.000000, X, Y) && !ellipse(32471.614000, 15536.398200, 481.440014, 481.440014, 0.000000, X, Y) && !ellipse(31336.330894, 13938.045314, 1516.299116, 1019.374281, 359.975817, X, Y) && !ellipse(31899.274000, 13780.484000, 5789.016167, 5789.016167, 0.000000, X, Y) && !ellipse(31556.743073, 15253.278137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31379.940800, 14122.550000, 1575.888045, 1575.888045, 0.000000, X, Y) && !ellipse(33842.144501, 15097.267288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29969.404000, 13909.857600, 1868.608054, 1868.608054, 0.000000, X, Y) && !ellipse(34437.408000, 14641.972000, 1303.272038, 1303.272038, 0.000000, X, Y)
[Sun Dec  4 15:57:21 2011] Writing fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src3.gif
[Sun Dec  4 16:11:52 2011] Mean detx,y = (3817.54, 14076.65) 
[Sun Dec  4 16:11:54 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 16:12:05 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 16:12:05 2011] Setting source spectrum file to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec  4 16:12:05 2011] Setting bgd. spectrum file to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Dec  5 06:51:22 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:22 2011] Error reading totcts from fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Dec  5 06:51:24 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:24 2011] Using photon index=1.80, rate=0.00161, arf fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src3.arf
[Mon Dec  5 06:51:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:24 2011] Updating source flux to 1.3e-14
[Mon Dec  5 07:08:35 2011] Flag b found in src. 3 procflags, skipping spectral fitting
[Mon Dec  5 07:08:35 2011] Flag c found in src. 3 procflags, skipping spectral fitting