[Fri Dec 2 20:28:30 2011] Detection parameters: Position = (406.3, 305.1) = 14 45 17.67 -62 18 53.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 2081.7 +/- 60.6 Background counts = 402.5 Rate = 0.04 +/- 0.001 [Fri Dec 2 20:28:34 2011] Off-axis axis estimate = 7.83' [Fri Dec 2 20:39:35 2011] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting [Fri Dec 2 20:39:35 2011] Initial guess for spatial extent in simple fitting = 10.35" [Fri Dec 2 20:39:35 2011] source mask rpix=2.4, npix_max = 33, mask sum = 29, frac = 0.875 [Fri Dec 2 20:39:35 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 10.35" [Sat Dec 3 05:48:12 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src28.ximg exists [Sat Dec 3 05:48:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src28.csv [Sat Dec 3 05:48:12 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src28_1.ximg exists [Sat Dec 3 05:48:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src28.csv [Sat Dec 3 05:48:12 2011] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Dec 3 05:48:14 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists [Sat Dec 3 05:48:14 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists [Sat Dec 3 05:48:14 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly [Sat Dec 3 16:57:31 2011] Source 28 is offset by 0.029856 and -3.117896 pixels which is larger than 2 X fitted extent = 1.227770 x 1.227770, not incorporating fit results [Sat Dec 3 16:57:31 2011] Warning, spatial fit 28 centroid is now closest to src. 26 [Sat Dec 3 16:57:31 2011] Source 28 is offset by -0.968995 and 3.813598 pixels which is larger than 2 X fitted extent = 1.155830 x 1.155830, not incorporating fit results [Sat Dec 3 16:57:31 2011] Vigneting correction estimate = 1.000000 [Sat Dec 3 16:57:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Dec 3 16:57:31 2011] Assessing source extent using major [Sat Dec 3 16:57:31 2011] Source does appear to be extended [Sat Dec 3 16:57:31 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Dec 3 16:58:19 2011] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting [Sat Dec 3 16:58:19 2011] Initial guess for spatial extent in simple fitting = 10.35" [Sat Dec 3 16:58:19 2011] source mask rpix=2.4, npix_max = 33, mask sum = 29, frac = 0.875 [Sat Dec 3 16:58:19 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 10.35" [Sun Dec 4 01:59:08 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src27.ximg exists [Sun Dec 4 01:59:08 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src27_1.ximg exists [Sun Dec 4 01:59:08 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_src27 appears to have run properly [Sun Dec 4 01:59:10 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists [Sun Dec 4 01:59:10 2011] fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists [Sun Dec 4 01:59:10 2011] Fit fullrun_pn_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly [Sun Dec 4 15:56:36 2011] Source 28 is offset by 2.099787 and -6.026241 pixels which is larger than 2 X fitted extent = 2.728474 x 2.728474, not incorporating fit results [Sun Dec 4 15:56:36 2011] Spatial fit model total counts = 14983.400000, observed total counts = 14988.000000 [Sun Dec 4 15:56:36 2011] Offset between fit and detection position for source 28 = 3.618794 pixels [Sun Dec 4 15:56:36 2011] Warning, changing simple spatial fit ID from 27 to 26 [Sun Dec 4 15:56:36 2011] 14513.790000 total counts/ 13370.800000 bgd. counts: snr = 9.884705 Spatial fit parameters: Offset between fit and detection position for source 28 = 3.618794 pixels Position = (404.2, 302.1) = 14 45 18.95 -62 19 6.6 Extent = 9.5 (9.1-10.0)", rotation angle = 0 Source counts = 1143.0 +/- 120.5 Background counts = 13370.8 Rate = 0.01 +/- 0.001 [Sun Dec 4 15:56:36 2011] Vigneting correction estimate = 1.000000 [Sun Dec 4 15:56:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Dec 4 15:56:36 2011] Assessing source extent using major axis lower bound [Sun Dec 4 15:56:36 2011] Source does appear to be extended [Sun Dec 4 15:56:36 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Dec 4 15:57:24 2011] Counts = 1142.990000, rescaling region sizes by 2.000000 [Sun Dec 4 15:57:24 2011] XMMSAS src. selection expression = ellipse(35118.278000, 26233.004000, 1143.769233, 1143.769233, 0.000000, X, Y) [Sun Dec 4 15:57:24 2011] Writing source region out to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src28_src.reg [Sun Dec 4 15:57:24 2011] Extracting stamp from image fullrun_pn_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (338, 236) - (470, 368) [Sun Dec 4 15:57:24 2011] XMMSAS bgd. selection expression = annulus(35118.278000, 26233.004000, 3812.564110, 7625.128219, X, Y) && !ellipse(32861.485760, 14857.972000, 4855.632140, 4855.632140, 0.000000, X, Y) && !ellipse(36081.535800, 20022.482200, 5444.784157, 2148.878462, 83.314290, X, Y) && !ellipse(34165.868800, 18821.448600, 6138.264177, 6138.264177, 0.000000, X, Y) && !ellipse(34766.612600, 21116.398000, 1276.424037, 1276.424037, 0.000000, X, Y) && !ellipse(34660.910400, 19966.094528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34878.957600, 21324.868200, 4281.672123, 4281.672123, 0.000000, X, Y) && !ellipse(38441.766000, 29815.054000, 1128.920032, 1128.920032, 0.000000, X, Y) && !ellipse(32540.691400, 17833.982000, 1362.344039, 1362.344039, 0.000000, X, Y) && !ellipse(37467.319000, 28851.168000, 4809.576138, 4809.576138, 0.000000, X, Y) && !ellipse(39892.038000, 31153.626000, 1229.160035, 1229.160035, 0.000000, X, Y) && !ellipse(38440.864800, 31008.420000, 795.620823, 795.620823, 0.000000, X, Y) && !ellipse(39015.214203, 30047.839478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37605.508000, 28369.846000, 1794.832052, 1794.832052, 0.000000, X, Y) && !ellipse(35408.379600, 24590.896000, 1189.624034, 1189.624034, 0.000000, X, Y) && !ellipse(35502.121400, 24003.112600, 730.281621, 730.281621, 0.000000, X, Y) && !ellipse(35746.574000, 23294.022000, 813.848023, 813.848023, 0.000000, X, Y) && !ellipse(35641.906200, 22828.205840, 814.032023, 814.032023, 0.000000, X, Y) && !ellipse(32282.348365, 17002.691246, 1707.083490, 745.890074, 261.575743, X, Y) && !ellipse(36263.778000, 18758.225920, 1070.064031, 1070.064031, 0.000000, X, Y) && !ellipse(35994.101501, 27530.861084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36190.210000, 25713.367200, 922.456027, 922.456027, 0.000000, X, Y) && !ellipse(31899.274000, 13780.484000, 5789.016167, 5789.016167, 0.000000, X, Y) && !ellipse(35547.331600, 23950.242400, 730.704821, 730.704821, 0.000000, X, Y) && !ellipse(35845.844000, 22182.664000, 523.680815, 523.680815, 0.000000, X, Y) && !ellipse(36622.398254, 19520.848770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39900.873566, 31524.441986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36435.562000, 25630.120000, 1044.112030, 1044.112030, 0.000000, X, Y) && !ellipse(37735.766000, 17086.058400, 1574.208045, 1574.208045, 0.000000, X, Y) && !ellipse(39282.557660, 32389.306000, 1743.232050, 1743.232050, 0.000000, X, Y) && !ellipse(30966.997345, 23789.428314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34628.328600, 23869.164000, 1614.512046, 842.928024, 81.643000, X, Y) && !ellipse(33679.494400, 21398.206000, 1148.744033, 1148.744033, 0.000000, X, Y) && !ellipse(33618.484833, 21003.013565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33233.855400, 20229.511560, 1673.448048, 587.771217, 81.980270, X, Y) && !ellipse(32748.876042, 18680.586000, 1673.448048, 404.724012, 82.215190, X, Y) && !ellipse(35551.622284, 18212.044113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29465.251400, 34529.034400, 752.143222, 752.143222, 0.000000, X, Y) && !ellipse(39328.456000, 33823.812000, 2072.832060, 2072.832060, 0.000000, X, Y) && !ellipse(37775.994000, 33768.160200, 1954.088056, 1954.088056, 0.000000, X, Y) && !ellipse(37146.421387, 31693.755859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36506.502000, 32472.874000, 1870.584054, 1870.584054, 0.000000, X, Y) && !ellipse(37907.966000, 30706.520000, 1661.728048, 1661.728048, 0.000000, X, Y) && !ellipse(31491.403800, 30037.287200, 356.961610, 356.961610, 0.000000, X, Y) && !ellipse(27161.514648, 28070.490479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29571.883219, 27618.464112, 691.103953, 452.708750, 85.426173, X, Y) && !ellipse(33810.892938, 26872.709273, 512.358801, 403.863567, 61.268364, X, Y) && !ellipse(32432.493443, 26025.782248, 640.111077, 478.675991, 77.219207, X, Y) && !ellipse(28406.672880, 25903.693000, 425.298412, 304.756809, 14.594400, X, Y) && !ellipse(29171.413180, 25573.961400, 417.721612, 417.721612, 0.000000, X, Y) && !ellipse(30890.744904, 25245.972076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37176.810852, 25007.675232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34327.564000, 25481.728200, 861.752025, 861.752025, 0.000000, X, Y) && !ellipse(34199.065399, 24830.183868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39945.488678, 24748.427551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34388.716000, 24365.628000, 1505.312043, 1505.312043, 0.000000, X, Y) && !ellipse(37579.037170, 24135.713165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36238.536774, 23796.283600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36564.492000, 23316.450000, 1288.736037, 1288.736037, 0.000000, X, Y) && !ellipse(36828.380800, 22411.738000, 1796.688052, 1796.688052, 0.000000, X, Y) && !ellipse(36439.559455, 22643.011974, 1340.040039, 167.572807, 90.000000, X, Y) && !ellipse(31887.569800, 22029.185000, 1500.920043, 1500.920043, 0.000000, X, Y) && !ellipse(35986.016000, 21361.212000, 1844.912053, 1032.232030, 74.267000, X, Y) && !ellipse(36617.364319, 20753.318680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36701.674774, 20330.652618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37163.331268, 18478.172302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35467.059601, 17793.138901, 870.000000, 870.000000, 0.000000, X, Y) [Sun Dec 4 15:57:24 2011] Writing fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src28.gif [Sun Dec 4 17:10:13 2011] Mean detx,y = (8362.94, 2556.34) [Sun Dec 4 17:10:17 2011] Setting backscal keywords in source and bgd. spectrum [Sun Dec 4 17:11:24 2011] Binned source spectrum to 10 counts/bin [Sun Dec 4 17:11:24 2011] Setting source spectrum file to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src28_src_b10.pi.gz [Sun Dec 4 17:11:24 2011] Setting bgd. spectrum file to fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src28_bgd.pi.gz [Mon Dec 5 06:51:23 2011] Updating aperture counts using extracted products [Mon Dec 5 06:51:23 2011] Error reading totcts from fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src28_src_b10.pi.gz [Mon Dec 5 06:51:24 2011] Calculating source flux in energy range 0.30-8.00 [Mon Dec 5 06:51:24 2011] Using photon index=1.80, rate=0.0109, arf fullrun_pn_xmm0504810101_pi300-10000_pass1_cl_src28.arf [Mon Dec 5 06:51:24 2011] Assuming count rate is from the 0.30-10.00 bandpass [Mon Dec 5 06:51:24 2011] Updating source flux to 3.8e-14 [Mon Dec 5 07:08:35 2011] Flag b found in src. 28 procflags, skipping spectral fitting