[Fri Dec  2 20:31:33 2011] Detection parameters:
  Position = (355.3, 258.0) = 14 45 49.40 -62 22 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 313.0 +/- 25.6
  Background counts = 112.6
  Rate = 0.003 +/- 0.0003

[Fri Dec  2 20:31:34 2011] Off-axis axis estimate = 5.06'
[Sat Dec  3 12:28:30 2011] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 12:28:30 2011] Initial guess for spatial extent in simple fitting = 8.96"
[Sat Dec  3 12:28:30 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.145
[Sat Dec  3 12:28:30 2011] Giving source the simple spatial ID 59 for pass 0, mean size = 8.96"
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src59.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src59.csv
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src59_1.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src59.csv
[Sat Dec  3 16:57:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Sat Dec  3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Sat Dec  3 16:57:15 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Sat Dec  3 16:57:55 2011] Warning, spatial fit 59 centroid is now closest to src. 91
[Sat Dec  3 16:57:55 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:55 2011] Assessing source extent using major
[Sat Dec  3 16:57:55 2011] Source does appear to be extended
[Sat Dec  3 16:57:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 08:08:37 2011] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Sun Dec  4 08:08:37 2011] Initial guess for spatial extent in simple fitting = 8.96"
[Sun Dec  4 08:08:37 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.145
[Sun Dec  4 08:08:37 2011] Giving source the simple spatial ID 58 for pass 1, mean size = 8.96"
[Sun Dec  4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src58.ximg exists
[Sun Dec  4 15:56:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src58.csv
[Sun Dec  4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src58_1.ximg exists
[Sun Dec  4 15:56:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src58.csv
[Sun Dec  4 15:56:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Sun Dec  4 15:56:20 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Sun Dec  4 15:56:59 2011] Spatial fit model total counts = 1164.490000, observed total counts = 1168.000000
[Sun Dec  4 15:56:59 2011] Offset between fit and detection position for source 98 = 0.033538 pixels
[Sun Dec  4 15:56:59 2011] 1167.140000 total counts/ 979.391000 bgd. counts: snr = 5.999286
Spatial fit parameters:
  Offset between fit and detection position for source 98 = 0.033538 pixels
  Position = (355.3, 258.0) = 14 45 49.41 -62 22 19.0
  Extent = 3.9 (3.4-4.4)", rotation angle = 0
  Source counts = 187.7 +/- 34.2
  Background counts = 979.4
  Rate = 0.002 +/- 0.0003
[Sun Dec  4 15:57:00 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:57:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:57:00 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:57:00 2011] Source does appear to be extended
[Sun Dec  4 15:57:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec  5 01:14:13 2011] XMMSAS src. selection expression = ellipse(30863.997600, 22398.989800, 234.537607, 234.537607, 0.000000, X, Y)
[Mon Dec  5 01:14:13 2011] Writing source region out to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src98_src.reg
[Mon Dec  5 01:14:13 2011] Extracting stamp from image fullrun_mos2_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (342, 245) - (369, 271)
[Mon Dec  5 01:14:13 2011] XMMSAS bgd. selection expression = annulus(30863.997600, 22398.989800, 390.896011, 781.792022, X, Y) && !ellipse(37947.510000, 29574.370000, 11645.232335, 11645.232335, 0.000000, X, Y) && !ellipse(38926.266000, 31017.820000, 12678.048365, 12678.048365, 0.000000, X, Y) && !ellipse(33105.164000, 20260.354000, 1643.672047, 1643.672047, 0.000000, X, Y) && !ellipse(30997.487400, 20970.264000, 1505.544043, 1505.544043, 0.000000, X, Y) && !ellipse(29618.138916, 23296.495575, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec  5 01:14:13 2011] Writing fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src98.gif
[Mon Dec  5 02:34:17 2011] Mean detx,y = (-3214.25, -5796.38) 
[Mon Dec  5 02:34:18 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec  5 02:34:30 2011] Binned source spectrum to 10 counts/bin
[Mon Dec  5 02:34:30 2011] Setting source spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Mon Dec  5 02:34:30 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src98_bgd.pi.gz
[Mon Dec  5 06:51:28 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:28 2011] Error reading totcts from fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Mon Dec  5 06:51:29 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:29 2011] Using photon index=1.80, rate=0.00164, arf fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src98.arf
[Mon Dec  5 06:51:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:29 2011] Updating source flux to 3e-14