[Fri Dec 2 20:31:33 2011] Detection parameters: Position = (417.4, 270.9) = 14 45 10.60 -62 21 21.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 304.4 +/- 29.5 Background counts = 160.0 Rate = 0.004 +/- 0.0004 [Fri Dec 2 20:31:34 2011] Off-axis axis estimate = 8.85' [Sat Dec 3 12:28:30 2011] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting [Sat Dec 3 12:28:30 2011] Initial guess for spatial extent in simple fitting = 10.86" [Sat Dec 3 12:28:30 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.003 [Sat Dec 3 12:28:30 2011] Giving source the simple spatial ID 50 for pass 0, mean size = 10.86" [Sat Dec 3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src50.ximg exists [Sat Dec 3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src50_1.ximg exists [Sat Dec 3 16:57:14 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src50 appears to have run properly [Sat Dec 3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src50.ximg exists [Sat Dec 3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists [Sat Dec 3 16:57:15 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly [Sat Dec 3 16:57:55 2011] Source 92 is offset by -0.302416 and -4.842333 pixels which is larger than 2 X fitted extent = 1.216184 x 1.216184, not incorporating fit results [Sat Dec 3 16:57:55 2011] Source 92 is offset by 0.767469 and -9.772448 pixels which is larger than 2 X fitted extent = 1.207448 x 1.207448, not incorporating fit results [Sat Dec 3 16:57:55 2011] Spatial fit model total counts = 4225.330000, observed total counts = 4221.000000 [Sat Dec 3 16:57:55 2011] Offset between fit and detection position for source 92 = 9.089223 pixels [Sat Dec 3 16:57:55 2011] 3535.658000 total counts/ 3014.310000 bgd. counts: snr = 9.495848 Spatial fit parameters: Offset between fit and detection position for source 92 = 9.089223 pixels Position = (424.2, 276.9) = 14 45 6.37 -62 20 55.8 Extent = 21.5 (21.1-21.7)", rotation angle = 0 Source counts = 521.3 +/- 59.5 Background counts = 3014.3 Rate = 0.005 +/- 0.0005 [Sat Dec 3 16:57:55 2011] Vigneting correction estimate = 1.000000 [Sat Dec 3 16:57:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Dec 3 16:57:55 2011] Assessing source extent using major axis lower bound [Sat Dec 3 16:57:55 2011] Source does appear to be extended [Sat Dec 3 16:57:55 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Dec 3 16:57:55 2011] Source is confused with source 86 [Sun Dec 4 08:08:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Sun Dec 4 08:08:37 2011] Initial guess for spatial extent in simple fitting = 21.52" [Sun Dec 4 08:08:37 2011] source mask rpix=4.9, npix_max = 118, mask sum = 121, frac = 1.020 [Sun Dec 4 08:08:37 2011] Giving source the simple spatial ID 49 for pass 1, mean size = 21.52" [Sun Dec 4 15:56:18 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src49.ximg exists [Sun Dec 4 15:56:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src49.csv [Sun Dec 4 15:56:18 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src49_1.ximg exists [Sun Dec 4 15:56:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src49.csv [Sun Dec 4 15:56:18 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src49_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Dec 4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists [Sun Dec 4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists [Sun Dec 4 15:56:20 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly [Sun Dec 4 15:56:59 2011] Source 92 is offset by -3.164828 and -5.504713 pixels which is larger than 2 X fitted extent = 2.425807 x 2.425807, not incorporating fit results [Sun Dec 4 15:56:59 2011] Warning, spatial fit 49 centroid is now closest to src. 17 [Sun Dec 4 15:57:00 2011] Vigneting correction estimate = 1.000000 [Sun Dec 4 15:57:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Dec 4 15:57:00 2011] Assessing source extent using major axis lower bound [Sun Dec 4 15:57:00 2011] Source does appear to be extended [Sun Dec 4 15:57:00 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Dec 5 01:14:13 2011] XMMSAS src. selection expression = ellipse(36860.520000, 24041.950000, 1290.906037, 1290.906037, 0.000000, X, Y) [Mon Dec 5 01:14:13 2011] Writing source region out to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src92_src.reg [Mon Dec 5 01:14:13 2011] Extracting stamp from image fullrun_mos2_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (350, 203) - (498, 351) [Mon Dec 5 01:14:13 2011] XMMSAS bgd. selection expression = annulus(36860.520000, 24041.950000, 2151.510062, 4303.020124, X, Y) && !ellipse(34202.988200, 18883.761600, 1838.952053, 1838.952053, 0.000000, X, Y) && !ellipse(37765.644800, 28873.756000, 1499.464043, 1499.464043, 0.000000, X, Y) && !ellipse(37638.830000, 28417.852000, 749.748822, 749.748822, 0.000000, X, Y) && !ellipse(36203.628448, 19956.939987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34870.818000, 21247.910000, 1696.488049, 1696.488049, 0.000000, X, Y) && !ellipse(35379.105700, 26927.698000, 904.880026, 904.880026, 0.000000, X, Y) && !ellipse(37167.639800, 27448.350100, 1123.200032, 1123.200032, 0.000000, X, Y) && !ellipse(35484.178000, 22419.350000, 1743.192050, 1743.192050, 0.000000, X, Y) && !ellipse(37947.510000, 29574.370000, 11645.232335, 11645.232335, 0.000000, X, Y) && !ellipse(36179.573989, 20205.795442, 1821.176052, 609.439160, 73.004308, X, Y) && !ellipse(35386.714600, 27009.495722, 1329.064038, 724.055221, 101.824000, X, Y) && !ellipse(35212.354000, 22692.476000, 1635.512047, 1635.512047, 0.000000, X, Y) && !ellipse(35525.072600, 25127.138000, 937.672027, 937.672027, 0.000000, X, Y) && !ellipse(35546.554600, 24375.670000, 1677.360048, 1677.360048, 0.000000, X, Y) && !ellipse(35974.584000, 25569.236000, 2263.744065, 1095.872032, 126.018000, X, Y) && !ellipse(35137.860000, 23485.308000, 3354.720097, 3354.720097, 0.000000, X, Y) && !ellipse(36664.947754, 27357.208893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35551.494843, 26226.747864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36631.928000, 26520.456000, 1689.160049, 1689.160049, 0.000000, X, Y) && !ellipse(38926.266000, 31017.820000, 12678.048365, 12678.048365, 0.000000, X, Y) && !ellipse(33022.934200, 19356.828040, 1261.424036, 1261.424036, 0.000000, X, Y) && !ellipse(32448.585999, 26031.839508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33797.832062, 26902.128906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33105.164000, 20260.354000, 1643.672047, 1643.672047, 0.000000, X, Y) && !ellipse(33618.155609, 20836.464905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33804.785600, 21342.094800, 1631.256047, 1631.256047, 0.000000, X, Y) && !ellipse(34098.216800, 22495.243800, 1617.424047, 856.816025, 332.626000, X, Y) && !ellipse(37322.784000, 30058.866000, 1816.272052, 1816.272052, 0.000000, X, Y) && !ellipse(39916.708200, 24776.618200, 376.192011, 376.192011, 0.000000, X, Y) && !ellipse(37600.080933, 25555.585663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34186.000000, 24579.788055, 870.000000, 870.000000, 0.000000, X, Y) [Mon Dec 5 01:14:13 2011] Writing fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src92.gif [Mon Dec 5 02:26:23 2011] Mean detx,y = (-9167.39, -4923.22) [Mon Dec 5 02:26:24 2011] Setting backscal keywords in source and bgd. spectrum [Mon Dec 5 02:26:36 2011] Binned source spectrum to 10 counts/bin [Mon Dec 5 02:26:36 2011] Setting source spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src92_src_b10.pi.gz [Mon Dec 5 02:26:36 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src92_bgd.pi.gz [Mon Dec 5 06:51:28 2011] Updating aperture counts using extracted products [Mon Dec 5 06:51:28 2011] Error reading totcts from fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src92_src_b10.pi.gz [Mon Dec 5 06:51:29 2011] Calculating source flux in energy range 0.30-8.00 [Mon Dec 5 06:51:29 2011] Using photon index=1.80, rate=0.00456, arf fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src92.arf [Mon Dec 5 06:51:29 2011] Assuming count rate is from the 0.30-10.00 bandpass [Mon Dec 5 06:51:29 2011] Updating source flux to 6.6e-14 [Mon Dec 5 06:58:25 2011] Flag b found in src. 92 procflags, skipping spectral fitting [Mon Dec 5 06:58:25 2011] Flag c found in src. 92 procflags, skipping spectral fitting