[Fri Dec  2 20:31:33 2011] Detection parameters:
  Position = (335.8, 294.3) = 14 46 1.62 -62 19 41.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 254.7 +/- 23.8
  Background counts = 91.0
  Rate = 0.002 +/- 0.0002

[Fri Dec  2 20:31:34 2011] Off-axis axis estimate = 2.73'
[Sat Dec  3 12:28:30 2011] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 12:28:30 2011] Initial guess for spatial extent in simple fitting = 7.79"
[Sat Dec  3 12:28:30 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.952
[Sat Dec  3 12:28:30 2011] Giving source the simple spatial ID 71 for pass 0, mean size = 7.79"
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src71.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src71.csv
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src71_1.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src71.csv
[Sat Dec  3 16:57:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Sat Dec  3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Sat Dec  3 16:57:15 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Sat Dec  3 16:57:55 2011] Spatial fit model total counts = 1088.820000, observed total counts = 1084.000000
[Sat Dec  3 16:57:55 2011] Offset between fit and detection position for source 83 = 0.118367 pixels
[Sat Dec  3 16:57:55 2011] 1078.201000 total counts/ 916.843000 bgd. counts: snr = 5.328967
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 0.118367 pixels
  Position = (335.8, 294.4) = 14 46 1.63 -62 19 40.9
  Extent = 5.2 (4.4-6.3)", rotation angle = 0
  Source counts = 161.4 +/- 32.8
  Background counts = 916.8
  Rate = 0.001 +/- 0.0003
[Sat Dec  3 16:57:55 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:55 2011] Assessing source extent using major axis lower bound
[Sat Dec  3 16:57:55 2011] Source does appear to be extended
[Sat Dec  3 16:57:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 08:08:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec  4 08:08:37 2011] Initial guess for spatial extent in simple fitting = 5.20"
[Sun Dec  4 08:08:37 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.042
[Sun Dec  4 08:08:37 2011] Giving source the simple spatial ID 69 for pass 1, mean size = 5.20"
[Sun Dec  4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src69.ximg exists
[Sun Dec  4 15:56:19 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src69.csv
[Sun Dec  4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src69_1.ximg exists
[Sun Dec  4 15:56:19 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src69.csv
[Sun Dec  4 15:56:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Sun Dec  4 15:56:20 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src69 appears to have run properly
[Sun Dec  4 15:56:59 2011] Spatial fit model total counts = 1087.460000, observed total counts = 1084.000000
[Sun Dec  4 15:56:59 2011] Offset between fit and detection position for source 83 = 0.001716 pixels
[Sun Dec  4 15:56:59 2011] 1077.003000 total counts/ 915.628000 bgd. counts: snr = 5.333063
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 0.001716 pixels
  Position = (335.8, 294.4) = 14 46 1.63 -62 19 40.9
  Extent = 5.2 (4.4-6.3)", rotation angle = 0
  Source counts = 161.4 +/- 32.8
  Background counts = 915.6
  Rate = 0.001 +/- 0.0003
[Sun Dec  4 15:57:00 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:57:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:57:00 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:57:00 2011] Source does appear to be extended
[Sun Dec  4 15:57:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec  5 01:14:14 2011] XMMSAS src. selection expression = ellipse(29169.203660, 25565.474800, 312.829809, 312.829809, 0.000000, X, Y)
[Mon Dec  5 01:14:14 2011] Writing source region out to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src83_src.reg
[Mon Dec  5 01:14:14 2011] Extracting stamp from image fullrun_mos2_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (318, 276) - (354, 312)
[Mon Dec  5 01:14:14 2011] XMMSAS bgd. selection expression = annulus(29169.203660, 25565.474800, 521.383015, 1042.766030, X, Y) && !ellipse(37947.510000, 29574.370000, 11645.232335, 11645.232335, 0.000000, X, Y) && !ellipse(38926.266000, 31017.820000, 12678.048365, 12678.048365, 0.000000, X, Y) && !ellipse(28414.461340, 25911.972000, 365.048011, 365.048011, 0.000000, X, Y)
[Mon Dec  5 01:14:14 2011] Writing fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src83.gif
[Mon Dec  5 02:40:13 2011] Mean detx,y = (-1968.88, -2426.66) 
[Mon Dec  5 02:40:14 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec  5 02:40:25 2011] Binned source spectrum to 10 counts/bin
[Mon Dec  5 02:40:25 2011] Setting source spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Mon Dec  5 02:40:25 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src83_bgd.pi.gz
[Mon Dec  5 06:51:28 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:28 2011] Error reading totcts from fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Mon Dec  5 06:51:29 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:29 2011] Using photon index=1.80, rate=0.00141, arf fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src83.arf
[Mon Dec  5 06:51:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:29 2011] Updating source flux to 1.7e-14