[Fri Dec  2 20:31:32 2011] Detection parameters:
  Position = (373.5, 299.8) = 14 45 38.10 -62 19 17.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 492.3 +/- 30.4
  Background counts = 106.8
  Rate = 0.005 +/- 0.0003

[Fri Dec  2 20:31:34 2011] Off-axis axis estimate = 5.45'
[Sat Dec  3 12:28:30 2011] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 12:28:30 2011] Initial guess for spatial extent in simple fitting = 9.15"
[Sat Dec  3 12:28:30 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.922
[Sat Dec  3 12:28:30 2011] Giving source the simple spatial ID 43 for pass 0, mean size = 9.15"
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src43.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src43.csv
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src43_1.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src43.csv
[Sat Dec  3 16:57:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Sat Dec  3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Sat Dec  3 16:57:15 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Sat Dec  3 16:57:55 2011] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 79 at 10.735221 pixels away
[Sat Dec  3 16:57:55 2011] Source 79 is offset by -6.515333 and -2.271040 pixels which is larger than
2 X fitted extent = 1.119370 x 1.119370, not incorporating fit results
[Sat Dec  3 16:57:55 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:55 2011] Assessing source extent using major
[Sat Dec  3 16:57:55 2011] Source does appear to be extended
[Sat Dec  3 16:57:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 08:08:37 2011] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Sun Dec  4 08:08:37 2011] Initial guess for spatial extent in simple fitting = 9.15"
[Sun Dec  4 08:08:37 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.922
[Sun Dec  4 08:08:37 2011] Giving source the simple spatial ID 43 for pass 1, mean size = 9.15"
[Sun Dec  4 15:56:18 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src43.ximg exists
[Sun Dec  4 15:56:18 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src43.csv
[Sun Dec  4 15:56:18 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src43_1.ximg exists
[Sun Dec  4 15:56:18 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src43.csv
[Sun Dec  4 15:56:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Sun Dec  4 15:56:20 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Sun Dec  4 15:56:59 2011] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 79 at 10.670255 pixels away
[Sun Dec  4 15:57:00 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:57:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:57:00 2011] Assessing source extent using major
[Sun Dec  4 15:57:00 2011] Source does appear to be extended
[Sun Dec  4 15:57:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec  5 01:14:12 2011] XMMSAS src. selection expression = ellipse(32448.585999, 26031.839508, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec  5 01:14:12 2011] Writing source region out to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src79_src.reg
[Mon Dec  5 01:14:12 2011] Extracting stamp from image fullrun_mos2_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (336, 262) - (411, 337)
[Mon Dec  5 01:14:12 2011] XMMSAS bgd. selection expression = annulus(32448.585999, 26031.839508, 1087.500000, 2175.000000, X, Y) && !ellipse(35379.105700, 26927.698000, 904.880026, 904.880026, 0.000000, X, Y) && !ellipse(35484.178000, 22419.350000, 1743.192050, 1743.192050, 0.000000, X, Y) && !ellipse(37947.510000, 29574.370000, 11645.232335, 11645.232335, 0.000000, X, Y) && !ellipse(35386.714600, 27009.495722, 1329.064038, 724.055221, 101.824000, X, Y) && !ellipse(35212.354000, 22692.476000, 1635.512047, 1635.512047, 0.000000, X, Y) && !ellipse(35525.072600, 25127.138000, 937.672027, 937.672027, 0.000000, X, Y) && !ellipse(35546.554600, 24375.670000, 1677.360048, 1677.360048, 0.000000, X, Y) && !ellipse(35974.584000, 25569.236000, 2263.744065, 1095.872032, 126.018000, X, Y) && !ellipse(35137.860000, 23485.308000, 3354.720097, 3354.720097, 0.000000, X, Y) && !ellipse(38926.266000, 31017.820000, 12678.048365, 12678.048365, 0.000000, X, Y) && !ellipse(33797.832062, 26902.128906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34098.216800, 22495.243800, 1617.424047, 856.816025, 332.626000, X, Y) && !ellipse(31023.349780, 23730.058800, 341.989610, 341.989610, 0.000000, X, Y) && !ellipse(34186.000000, 24579.788055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29618.138916, 23296.495575, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec  5 01:14:12 2011] Writing fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src79.gif
[Mon Dec  5 02:20:49 2011] Mean detx,y = (-5303.93, -2429.77) 
[Mon Dec  5 02:20:50 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec  5 02:21:01 2011] Binned source spectrum to 10 counts/bin
[Mon Dec  5 02:21:01 2011] Setting source spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Mon Dec  5 02:21:01 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src79_bgd.pi.gz
[Mon Dec  5 05:01:26 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec  5 05:01:26 2011] rmf not generated due to insufficient counts
[Mon Dec  5 06:51:28 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:28 2011] Error reading totcts from fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Mon Dec  5 06:51:29 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:29 2011] Using photon index=1.80, rate=0.00506, arf fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src79.arf
[Mon Dec  5 06:51:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:29 2011] Updating source flux to 6.2e-14
[Mon Dec  5 06:58:25 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting