[Fri Dec  2 20:31:32 2011] Detection parameters:
  Position = (424.0, 349.0) = 14 45 6.71 -62 15 42.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 165.3 +/- 24.2
  Background counts = 144.3
  Rate = 0.002 +/- 0.0004

[Fri Dec  2 20:31:34 2011] Off-axis axis estimate = 9.82'
[Sat Dec  3 12:28:30 2011] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 12:28:30 2011] Initial guess for spatial extent in simple fitting = 11.34"
[Sat Dec  3 12:28:30 2011] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.933
[Sat Dec  3 12:28:30 2011] Giving source the simple spatial ID 67 for pass 0, mean size = 11.34"
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src67.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src67.csv
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src67_1.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src67.csv
[Sat Dec  3 16:57:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Sat Dec  3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Sat Dec  3 16:57:15 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Sat Dec  3 16:57:55 2011] Warning, spatial fit 67 centroid is now closest to src. 5
[Sat Dec  3 16:57:55 2011] Spatial fit model total counts = 3267.910000, observed total counts = 3260.000000
[Sat Dec  3 16:57:55 2011] Offset between fit and detection position for source 67 = 6.942787 pixels
[Sat Dec  3 16:57:55 2011] Warning, changing simple spatial fit ID from 67 to 85
[Sat Dec  3 16:57:55 2011] 3257.997000 total counts/ 2776.460000 bgd. counts: snr = 9.138690
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 6.942787 pixels
  Position = (430.7, 351.0) = 14 45 2.59 -62 15 33.1
  Extent = 22.7 (22.7-45.4)", rotation angle = 0
  Source counts = 481.5 +/- 57.1
  Background counts = 2776.5
  Rate = 0.004 +/- 0.0005
[Sat Dec  3 16:57:55 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:55 2011] Assessing source extent using major axis lower bound
[Sat Dec  3 16:57:55 2011] Source does appear to be extended
[Sat Dec  3 16:57:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:57:55 2011] Source is confused with source 5
[Sun Dec  4 08:08:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec  4 08:08:37 2011] Initial guess for spatial extent in simple fitting = 22.70"
[Sun Dec  4 08:08:37 2011] source mask rpix=5.2, npix_max = 130, mask sum = 129, frac = 0.986
[Sun Dec  4 08:08:37 2011] Giving source the simple spatial ID 65 for pass 1, mean size = 22.70"
[Sun Dec  4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src65.ximg exists
[Sun Dec  4 15:56:19 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src65.csv
[Sun Dec  4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src65_1.ximg exists
[Sun Dec  4 15:56:19 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src65.csv
[Sun Dec  4 15:56:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Sun Dec  4 15:56:20 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Sun Dec  4 15:56:59 2011] Warning, spatial fit 65 centroid is now closest to src. 65
[Sun Dec  4 15:57:00 2011] Spatial fit model total counts = 3267.650000, observed total counts = 3260.000000
[Sun Dec  4 15:57:00 2011] Offset between fit and detection position for source 67 = 5.113710 pixels
[Sun Dec  4 15:57:00 2011] Warning, changing simple spatial fit ID from 65 to 83
[Sun Dec  4 15:57:00 2011] 2853.338000 total counts/ 2594.430000 bgd. counts: snr = 5.083051
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 5.113710 pixels
  Position = (429.6, 346.1) = 14 45 3.27 -62 15 54.8
  Extent = 22.7 (22.7-45.4)", rotation angle = 0
  Source counts = 258.9 +/- 53.4
  Background counts = 2594.4
  Rate = 0.002 +/- 0.0005
[Sun Dec  4 15:57:00 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:57:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:57:00 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:57:00 2011] Source does appear to be extended
[Sun Dec  4 15:57:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec  5 01:14:14 2011] XMMSAS src. selection expression = ellipse(37322.784000, 30058.866000, 1362.204039, 1362.204039, 0.000000, X, Y)
[Mon Dec  5 01:14:14 2011] Writing source region out to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src67_src.reg
[Mon Dec  5 01:14:14 2011] Extracting stamp from image fullrun_mos2_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (351, 268) - (508, 424)
[Mon Dec  5 01:14:14 2011] XMMSAS bgd. selection expression = annulus(37322.784000, 30058.866000, 2270.340065, 4540.680131, X, Y) && !ellipse(37765.644800, 28873.756000, 1499.464043, 1499.464043, 0.000000, X, Y) && !ellipse(38216.968000, 30395.452000, 1775.184051, 1775.184051, 0.000000, X, Y) && !ellipse(37638.830000, 28417.852000, 749.748822, 749.748822, 0.000000, X, Y) && !ellipse(35379.105700, 26927.698000, 904.880026, 904.880026, 0.000000, X, Y) && !ellipse(37167.639800, 27448.350100, 1123.200032, 1123.200032, 0.000000, X, Y) && !ellipse(37947.510000, 29574.370000, 11645.232335, 11645.232335, 0.000000, X, Y) && !ellipse(35386.714600, 27009.495722, 1329.064038, 724.055221, 101.824000, X, Y) && !ellipse(35525.072600, 25127.138000, 937.672027, 937.672027, 0.000000, X, Y) && !ellipse(35546.554600, 24375.670000, 1677.360048, 1677.360048, 0.000000, X, Y) && !ellipse(35974.584000, 25569.236000, 2263.744065, 1095.872032, 126.018000, X, Y) && !ellipse(35137.860000, 23485.308000, 3354.720097, 3354.720097, 0.000000, X, Y) && !ellipse(38813.746000, 31777.278000, 953.056027, 953.056027, 0.000000, X, Y) && !ellipse(36664.947754, 27357.208893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35551.494843, 26226.747864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36631.928000, 26520.456000, 1689.160049, 1689.160049, 0.000000, X, Y) && !ellipse(38926.266000, 31017.820000, 12678.048365, 12678.048365, 0.000000, X, Y) && !ellipse(39074.859436, 29669.986328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32448.585999, 26031.839508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33797.832062, 26902.128906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40855.961080, 32358.820000, 2110.976061, 2110.976061, 0.000000, X, Y) && !ellipse(40294.814000, 31973.346000, 2113.008061, 2113.008061, 0.000000, X, Y) && !ellipse(41791.720000, 31490.573600, 668.841619, 668.841619, 0.000000, X, Y) && !ellipse(36860.520000, 24041.950000, 1721.208050, 1721.208050, 0.000000, X, Y) && !ellipse(43035.005800, 31898.890000, 1365.656039, 1365.656039, 0.000000, X, Y) && !ellipse(40955.022000, 30750.952800, 1335.672038, 1335.672038, 0.000000, X, Y) && !ellipse(37515.639600, 31151.260000, 1893.480054, 1893.480054, 0.000000, X, Y) && !ellipse(37600.080933, 25555.585663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36619.629059, 30918.166046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42464.054779, 31856.474640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41695.344147, 33204.305573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41114.404000, 32864.360000, 2113.008061, 2113.008061, 0.000000, X, Y)
[Mon Dec  5 01:14:14 2011] Writing fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src67.gif
[Mon Dec  5 02:39:08 2011] Mean detx,y = (-10959.24, 579.09) 
[Mon Dec  5 02:39:09 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec  5 02:39:21 2011] Binned source spectrum to 10 counts/bin
[Mon Dec  5 02:39:21 2011] Setting source spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Mon Dec  5 02:39:21 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Mon Dec  5 06:51:28 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:28 2011] Error reading totcts from fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Mon Dec  5 06:51:29 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:29 2011] Using photon index=1.80, rate=0.00227, arf fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src67.arf
[Mon Dec  5 06:51:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:29 2011] Updating source flux to 3.4e-14
[Mon Dec  5 06:58:25 2011] Flag c found in src. 67 procflags, skipping spectral fitting